Tender For Rdddc2627104537-(Const Of Washroom Room Near Masjid Noor At Ratnipora Block Kakapora) Year 2026-27 Scheme: Pri
Tender Value
1.74 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
3496
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rdddc2627104537-(Const Of Washroom Room Near Masjid Noor At Ratnipora Block Kakapora) Year 2026-27 Scheme: Pri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:2.9.1 All kinds of soil : |
| 2 | P/L of dry stone soling duly hand packed Icl Carriage incl plum |
| 3 | P/L of c.conc (1:3:6) using 20mm crushed stone agg wih 20% plum |
| 4 | P/L of RCC slab in 1:2:4 mix with 20 mm nominal size aggregates excl. cost of shutteringand reinforcement |
| 5 | Reinforcement for RCC works incl cutting bending, straightning, etc complete |
| 6 | Centering and shuttering incl strutting, propping, and removal of farmwork, in suspended floors, beams |
| 7 | Centering and shuttering incl strutting, propping, and removal of farmwork etc slab |
| 8 | S/S of Boulder/GSB filling under rooms floors incl. watering and ramming with hand rammer including carriage. |
| 9 | Brick work using FPS Bricks in 1:4 Cement Mortor in foundation and plinth |
| 10 | Providing and fixing aluminum work for doors, windows, ventilators and partitions (frame) with extruded built up standard tubular sections/appropriate 2 sections and other sections of approved make conforming to 15: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions ie, at top, bottom and sides with required EPDM rubber/neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Powder coated aluminum (minimum thickness of powder coated 50 microns). Incl. shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required, 4mm Thick ACP Sheets & all other accessories (Handles, Tower-Bolt, Al-Drop etc.) (14-Guage Material |
| 11 | P/A 12mm thick cement Plaster in (1:6) mix |
| 12 | P/A white cement based putty of average thickness 2mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete |
| 13 | Finishing exterior walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade two or more coats @3.84kg/10sqm |
| 14 | Providing and fixing 1st quality ceramic glazed tiles of size 600x600mm conforming to 15: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 15 | Providing and laying vitrified floor tiles in sizes 600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 [1 cement 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 16 | carriage of sand aggregate of avg lead 10 kms by mt |
| 17 | carriage of bricks of avg lead 12 kms by mt |
| 18 | Provision for sanitry installation and other unforseen Items incl 1000 Ltr tank 2 No commods cystern long bend pvc pipes Bib cocks and other fittings required |
| 19 | Provision for Sighnboard and Photographs , other unforseen items , site-Clearance , painting Slogans SBM Logo (as approved by Engineer in-charge) Unforseen items Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender