Tender For electrical installation Work For Relocation Of Busbar , Main Switch ,Change Over Switch At Cmoh Office, Tamluk , In The District Of Purba Medinipur.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Sep 2026
4 days left
EMD
7664
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur East → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for electrical installation Work For Relocation Of Busbar , Main Switch ,Change Over Switch At Cmoh Office, Tamluk , In The District Of Purba Medinipur.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying & Fixing best quality (1/2'' thick) bakelite board (3' x 2') fixing with suitable fastner on wall incl. S & F 03 nos. 415 V, 200 A kit-kat rewireable fuse (Porcelain fuse carrier & base) & 01 no. 415 V, 200 A Cu neutral link(Make: Havells/L&T) on porcelain chair fixed on the bakelite board. |
| 2 | Supplying and fixing 415V, 160 A TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(Make-L& T/Legrand/Havells) |
| 3 | Supplying & fixing sheet metal (16 SWG) Iron Clad 4 bar, 200A, Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD SpecificationBook – May 1991) |
| 4 | Supplying and fixing 415V, 160A TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc(Make-L& T/Legrand/Havells) |
| 5 | Supplying and fixing 415 V, 16-32A per way, 6 wayTPN MCBDB with SS enclosure double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 18 nos SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1no. 63A FP MCB type Isolator, 18 no. (16-32A) SPMCB, (Make- Siemens/ Schneider/ Legrand) |
| 6 | Supplying and fixing 250 V, 6-10A per way, (2+8)SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1no. 40A DP Isolator, 8 no. (6-16A) SPMCB). (Make-Siemens/ Legrand/ Schneider) |
| 7 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish ,2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC incl.3 nos. (Ph, N & Earth bars) Avg. Run 8 mtr.([only PVC Rigid Conduit on ceiling and remaining portion concealed) |
| 8 | Supply & Delivery of following size 1.1 kv.gr. XLPE insulated 1100V Grade as per IS 7098 (part 1)1988 armoured sheathed Aluminium conductor cable [Make Polycab /Havells/ Gloster/ KEI] |
| 9 | a) 4 core 50 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 10 | c) 4 core 35 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 11 | Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 12 | a) 4 core 50 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 13 | b) 4 core 35 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 14 | S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entryof XLPE/PVC armoured cableas & Finishing the end of the following XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials: |
| 15 | a) 4 core 50 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 16 | b) 4 core 35 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. |
| 17 | S&drawing 1.1 kv single core stranded FR PVC insulated &unsheated single core stranded cupper wire (approved make)of the following sizes by the Gifish wire & making necy connection as required. |
| 18 | a) 4 x 35 sqmm |
| 19 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 20 | a) 35 sqmm |
| 21 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI-Medium GI pipe. |
| 22 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. |
| 23 | Connecting the equipments body to earth busbar incl. S & F 25 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc. |
| 24 | Dismentling & refixing of Main switch, busbar Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender