Tender For Providing Supply And Erection Of 7.50Hp Submersible Motor,Water Supply Arrangements At Karatankadu In W.No-19
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
24 Sep 2026
9 days left
EMD
4500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Supply And Erection Of 7.50Hp Submersible Motor,Water Supply Arrangements At Karatankadu In W.No-19
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing damaged brick masonry wall in cement mortor Up to 3M height including clearing away from the site and all labour charges etc complete . |
| 2 | Dismantling the existing damaged Reinforced cement concrete surface Up to 3M height including clearing away from the site and all labour charges etc complete . |
| 3 | Earth work excavation and depositing on the bank with initial lead and lift of 10 metres and initial lift of 2 metres in hard stiff clay stiff block cotton hard red earth murram, gravel stoney earth and earth mixed with small size boulders and hard gravelly soils (SS 20 B) etc., complete as per standard specification . |
| 4 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying,nsolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete multiplying with standard specification and as directed by the departmental officers. The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers -Mixing by Manual means |
| 5 | Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Sand) mix using all New granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification |
| 6 | Brick work in Cement Mortar 1:5 mix using best quality Burnt Clay Brick of size 9” x 4 3/8” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 7 | Plastering with cement mortar 1:5 (One cement and five sand) mix 12mm thick including cost of all materials and labour including curing charges complete as per standard specification |
| 8 | Supplying and fabrication placing in position of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification. |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation |
| 10 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) |
| 11 | Supply and Delivery of 3 Phase wet type 7.50 H.P Submersible Motor 50 LPM x 175 m head Suitable for 150 mm dia borewell confirmed to the IS 8034 Specification MER 10/25 time to the Suitable for intalation of 6\\" Borewell as per ISI Standred Specification |
| 12 | Supply and fixing of 7.50 H.P Panel Board 3 phase starter delta with two level guard and auto start etc., Complete |
| 13 | Supply and Delivery of 3 Core 4 Sq.mmCopper Cable approuved quality and design by Departmental officers including loading, unloading ,Cost and conveyance of all materials to Site for all etc., Complete. |
| 14 | Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading Cost and conveyance of all materials to Site etc., Complete. |
| 15 | 40mm GI Elbow |
| 16 | 40mm GI union |
| 17 | 50mm GM NRV |
| 18 | 40mm Clamp set |
| 19 | MS cover plate |
| 20 | 40mm UPVC Pipe(Heavy) |
| 21 | 40mm UPVC Adopter |
| 22 | 40mm PVC Pipe 10kgf |
| 23 | 40mm PVC Bend |
| 24 | 40mm PVC Tee |
| 25 | 40mm PVC Elbow |
| 26 | 20mm GI Pipe medium |
| 27 | 20mm GI Elbow |
| 28 | 20mm GI Coupling |
| 29 | Brass Chromium Plated Screw Down Tap 15 |
| 30 | PVC Water tank |
| 31 | Labour Charges for the erection of Submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, and erection of panel board consisting of TPICN swtiches starter voltmetre, Ammeter, three point (indicating) lamps capacitor single phasing preventor and laying and jointing the cable and twin earthing for etc., Complete and testing the pumpset and trail run for 10 days. |
| 32 | Laying and Jointing the following PVC Pipes and GI pipes and Specials with proper gradient and test for all labour charges etc., Complete. |
| 33 | 40mm PVC Pipe 10kgf |
| 34 | 20mm GI Pipe medium |
| 35 | Supply and delivery of MS Kiosk ofsize 0.75m x 0.45m x 0.75m made upof MS angle of size 50mm x 50mmx4mm alround covered with 16 gaugeMS sheet and kiosk door made up of 1 No 8240.00MS plates of size 25 mm x 3 mmincluding cutting, welding, grinding,locking arrangements and labourcharges etc., |
| 36 | Supplying and fixing of 63 Amps 4 Pole MCB (Miniature circuit breaker) with M.S Box of size 100x150x75mm with suitable painting including Cost and conveyance of all materials to Site for all etc., Complete. |
| 37 | Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with3 Nos.32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection (SD-129) |
| 38 | Supply and run off 4 of 6 Sq.mm sqmm polythelene insulated and PVC sheathed (heavy duty) SC alu cable of 1100 V grade on bearer wire for service connection mains etc., Complete (SD 68) |
| 39 | Supply and run of 4x6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains (SD 73) |
| 40 | Supply and fixing of 3 Phase 32A aerial fuse unit for 3 Nos 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps [ SD No 135] |
| 41 | Supplying and fixing of 150mm thick reinforced cement concrete 1:1.5:3mix precast slab using 20mm ISS metal including cost of moulding charges including concrete mixing laying and finishing curing etc., but excluding cost of steel etc., complete complying with standard specification. |
| 42 | Refilling the pipe trunch with excavated earth in layers of not more than 15cm thick well rammed and consolidated Including and labour charges etc., complete complying with standard specification. |
| 43 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender