Power Boards / Undertakings / PSU Closing in 2 days TDR #57386304

Tender For Reconductoring Work From Choondupalaka To Aruvikuzhi [Cw-4552-202627-23] Under Electrical Section, Kattakada Of Electrical Division, Kattakada Under Electrical Circle, Kattakada

Issued by Boards / Undertakings / PSU · Thiruvananthapuram, Kerala
Tender Value
6.47 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
2 days left
EMD
16200
Bank guarantee accepted
Document Fee
1534
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Reconductoring Work From Choondupalaka To Aruvikuzhi [Cw-4552-202627-23] Under Electrical Section, Kattakada Of Electrical Division, Kattakada Under Electrical Circle, Kattakada

BOQ

Name of Work:- Reconductoring work from Choondupalaka to Aruvikuzhi [CW-4552-202627-23] under Electrical Section, Kattakada of Electrical Division, Kattakada under Electrical Circle, Kattakada
Sl. No. Item Description
1Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalant (3 conductors) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works.
2Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
3Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
4Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
5Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
6Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
7Fitting and providing one HT Stay for 11kV pole, including digging and back filling pit in ordinary soil.
8Renewal of existing damaged/broken old 11kV Stay to the existing stay rod.
9Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
10Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
11Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
12Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.
13Transferring LT single phase 2/3 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
14Transferring LT three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete.
15Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
16Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
17Providing bridging at Cut points for 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalent (1 conductors) using IPC and respective conductors Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57386304
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 6.47 Lakhs
LAST DATE 18-09-2026
Authority
Authority Name Kerala State Electricity Board
Work Description Tender for Reconductoring Work From Choondupalaka To Aruvikuzhi [Cw-4552-202627-23] Under Electrical Section, Kattakada Of Electrical Division, Kattakada Under Electrical Circle, Kattakada
Basic Detail
Tender No EE/PMU(KTDA)/ET-24/2026-27 dated 07.09.2026
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 07 Sep 2026
Submission Date 18 Sep 2026
Open Date 23 Sep 2026
Finance
Tender Value 6.47 Lakhs
Tender Fee 1534
EMD 16200
Exemption Not Available
Document List
8089becb-668b-4939-8a62-a12cc6f8ca17.html
BID24.pdf
BOQ_1470282.xls
Tendernotice_1 (19).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Sep 23, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

8089becb-668b-4939-8a62-a12cc6f8ca17.html

pdf

BID24.pdf

xls

BOQ_1470282.xls

pdf

Tendernotice_1 (19).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders