Tender For Addn/Altn Of Otm Accn Bldg No P-31 For Women Military Police And special Repair Bldg No P-106(Gf & Ff Toilets/Bathrooms,Kitchen,Roof) At Saa Under Ge(S) Tezpur
Tender Value
37.77 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
12 days left
EMD
75600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/Altn Of Otm Accn Bldg No P-31 For Women Military Police And special Repair Bldg No P-106(Gf & Ff Toilets/Bathrooms,Kitchen,Roof) At Saa Under Ge(S) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or Frames, not exc. 1.50 Sqm Each, complete all as specified and as directed. |
| 2 | Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc. 4.00 Sqm Each, complete all as specified and as directed. |
| 3 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 4 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC 'C' Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 5 | S/F 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. Divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters as specified in SSR Part I, section 8, clause 8.23(a).complete all as specified and as directed. |
| 6 | S&F 30mm thick Plain, framed, panelled shutters double leaf (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed. |
| 7 | M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed. |
| 8 | M&L Brick Work with Sub-Class ‘B’ Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. |
| 9 | Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debries/ rubbish, etc., complete all as specified and as directed. |
| 10 | M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5mm thick in cement morter (1:4) using water proofing compound @ 3% by weight of cement and finishing the surface even and smooth without using extra cement including necessary scafolding and saftey measures complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) |
| 11 | M&L Preparing new plastered surfaces of Walls and applying Two Coats of Exterior Emulsion Paint Weather Coat over a coat of Primer (as per Manufacturer’s instructions), and applied over 2 Coats BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 12 | M&L Rendering (Internally) 10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 13 | M&L preparing new plastered surfaces of wall and and applying Two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer complete all as specified and as directed. |
| 14 | M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc. finishing Plastered Surfaces Even and Smooth, without using Extra Cement. complete all as specified and as directed. |
| 15 | Supply only Integral Water Proofing compound, conforming to IS 2645 and as approved, complete all as specified and as directed. |
| 16 | S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 straps, etc. have screwed, ends including keys, cotters, wedges, etc. for timber trusses and similar work conforming to Fe- 290 Gde-E-165 complete all as specified and as directed. |
| 17 | S & F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 18 | S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 19 | S&F 4 mm thick frosted/ pin headed glass in ventilator shutters including hacking out old broken glass any, size, quality or description from wooden / metal frame works complete all as specified and directed by Engr-in-Charge |
| 20 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples complete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 21 | S& F 100 mm stainless steel Butt hinges with with SS Screw complete all as specified and as directed. |
| 22 | S&F Aluminium anodised sliding door bolts of size 250 mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy. complete all as specified and as directed. |
| 23 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 24 | M & L for mass concrete filling using PCC ( 1:5:10) type E2 in sunken floor using WPC @ 3% of cement used complete all as specified and as directed. (Note: WPC Shall be paid separately) |
| 25 | M & L for average 25 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded aggregate with integral wpc complies with in sunken floor and bathroom area complete all as specified and as directed.( Note: WPC shall be paid seprately) |
| 26 | S & F APP base polymeric membrane minimum weighing 3kg/sqm and 3mm thick reinforced with polyester non-wove fabric (wt not less than 150gms/sqm) laid on bitumen 85/25 grade over a coat of primer surface by forced application complete all as specified and directed |
| 27 | S & F in repair 300mm, ordinary rat tail rod pattern door springs including roller and roller plate complete all as specified and as directed. |
| 28 | M/L for 2 coats of synthetic enamelled paint over coat of pink primer on wooden surfaces oves 10cm width or girth including preparation of old surface.complete all as specified and as directed. |
| 29 | M&L Cement Concrete type C2(1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 30 | M&L Complete removal of existing Treatment of old decorated Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion over a coat of primer and applied over BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 31 | M&L for complete removal of existing treatment and applying two coats of weather coat over a coat of polymer (exterior grade) putty to make surface smooth and one coat of primer damp sheild over old plastered wall complete all as specefied and directed. |
| 32 | M&L Preparing old Surfaces of ceilings and applying Three Coats of White Wash, complete all as specified and as directed. |
| 33 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. |
| 34 | M&L Mat Finish Ceramic Tiles 10 mm thick (square/ rectangular) in any Shade, Polished, size of each Tile 600mm x 600mm as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20mm thick screed bed in cement sand mortar (1:6)complete all as specified and as directed. |
| 35 | S&F vitrified Glazed tiles 450 x 300 mm x 7 to 8 mm or 600x300x8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed with epoxy filler to match over 10mm screeding in Cement mortar 1:3 complete all as specified and as directed. |
| 36 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 37 | M&L Non - skid Ceramiccoloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with epoxy filler to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. |
| 38 | S & F Unplasticised PVC pipes 15 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of old GI Pipe complete all as specified and as directed. |
| 39 | S & F Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of old GI pipe complete all as specified and as directed. |
| 40 | Cutting chases ,pinning ,making good to facing where required and painting in cement mortar 1:3 to ends or egdes of landings ,steps,cills ,sunshed,shelves,lintels etc and cutting chases for concealed water tubing etc inlcuding making good cutting shall n.exc 10 cm girth complete all as specified and directed. |
| 41 | S & F in repair 15 mm bore pillar tap, fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S & F,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 43 | S & F, as in repair, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions including dismantling wall tiles and fixing broken tiles with matching colour, area of wall tiles not exceeding 0.50 sqm. complete all as specified and directed. |
| 44 | S & F, waste coupling CP 32/40 mm dia for glazed ware basins/ Sink etc with fly nuts flanged including 610 mm long waste pipe etc complete all as specified and directed. |
| 45 | M & L, as in repair for 75 mm dia of outlet PVC(SWR) floor trap, plain with granting including jointing with solvent cement complete all as specified and directed |
| 46 | S & F, as in repairs, sheet glass self assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 47 | S & F, as in repair, vitreous china wash basin, white, size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. |
| 48 | S & F,in repairs Vitreous China Urinal, Half stall type, whitewhite, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement with spreader complete all as specified and as directed. |
| 49 | S & F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed. |
| 50 | S & F as in repair, 600 mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 51 | S&F in repairs PVC connections 15mm size with PTMT nut of length 450mm complete all as specified and directed |
| 52 | Dismantling and breaking up PVC/iron drain or vertical waster pipes of any dia jointed in CM and taking out of trenches.complete all as specified and as directed. |
| 53 | S & F, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor complete all as specified and directed. |
| 54 | S & F, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trainches or floor complete all as specified and as directed. |
| 55 | S&F for PVC (SWR) with access door bend 110mm dia.complete all as specified and as directed. |
| 56 | S&F for PVC (SWR) with access door bend 75 mm dia.complete all as specified and as directed. |
| 57 | S&F in repair PVC(SWR) junction single with access door (single 'T') equal or unequal 75 mm bore.complete all as specified and as directed. |
| 58 | S&F in repair PVC (SWR) junction single access door (single 'T') equal or unequal 110mm bore.complete all as specified and as directed. |
| 59 | S&F in repair PVC (SWR) junction double with access door , (double T), equal or unequal 110mm bore. complete all as specified and as directed. |
| 60 | S & F, PVC cowls 110 mm bore complete all as specified and directed. |
| 61 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 62 | M&L in repairs for PVC(SWR) gully trap 125/110 mm setting and jointing with solvent complete all as specified and as directed. |
| 63 | S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.. |
| 64 | S & F in repairs Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws.complete all as specified and as directed. |
| 65 | S & F, as in repair, vitreous china wash down water closet pan (Pedestal pattern) white (excluding flushing cistern ) but including seat cover white closed type and flush pipe complete all as specified and directed |
| 66 | Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor complete all as specified and directed. |
| 67 | S & F, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (padestan pattern) complete all as specified and directed. |
| 68 | Supply and fix,as in repair, 32/40 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed. |
| 69 | S&F in repairs stainless steel grating round/ Square cockroach proof with or without hole100/75mm dia complete all as specified and directed. |
| 70 | S&F In repairs Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and as directed. |
| 71 | Supply and fix, as in repair, Shower rose 40 mm dia with neck of 450/600mm long standard of PTMT any colour screwed, for iron pipe 15mm bore complete all as specified and as directed. |
| 72 | S&F composite 100% solid wood plastic complete (single extended process) material with density not less than 780 kg/cum and plastic wood as in chowkhat complete all as per manufacturer instruction. complete all as specified and as directed. |
| 73 | M&L Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed. |
| 74 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 75 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 76 | Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly complete all as specified and directed |
| 77 | M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm complete all as specified and as directed. |
| 78 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capavity on same place with all required necessary fittings complete all as specified and as directed. |
| 79 | S&F in repair Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. |
| 80 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for foundation etc. and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge. |
| 81 | Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed. |
| 82 | Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed. |
| 83 | M&L for PCC 1:3:6 type C2 (40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 84 | M&L for RCC M-25 (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete complete all as specified and as directed. |
| 85 | M&L for RCC M-25 using 20mm graded aggregate as columns, pillars, piers ,posts and struts complete all as specified and as directed. |
| 86 | M&L for RCC M-25 using 20mm graded aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and as directed. |
| 87 | M&L for RCC M 25 (design mix) as in slabs supported on walls, beams and columns in floors, roofs landings, balconies, canopies, deck slabs and in shelves and similar works complete all as specified and as directed. |
| 88 | M&L mild steel bars 10 mm dia and over cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 89 | M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 90 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed. |
| 91 | M&L for form work to sides of concrete foundations, footings, bases of colunns, raft and raft beams sides and soffits of foundation and plinth beams,and similar work , vertical or batter, rough finished surface of concrete complete all as specifed and as directed. |
| 92 | M&L for form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs and similar works for rough finished surface of concrete complete all as specified and as directed. |
| 93 | M&L for form work to sides of columns, posts, pillars etc Rectangle/circular in shape for fair finished surface of concrete complete all as specified and as directed. |
| 94 | S&F non skid/matt finish ceramic white tiles 7 to 8mm thick (square/rectangular)area of each tile esceeding 0.18 Sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointd in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4) complete all as specified and as directed . |
| 95 | S&F Coloured Glazed ceramic tiles 450 x 350 mm /600 x300 mmx 7 to 8mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm screed bed in Cement mortar (1:4) complete all as specified and directed. |
| 96 | Demolition of brickwork or stone/boulder masonry, built in cement mortar complete all as specified and as directed. |
| 97 | M & L, 15mm thick rendering in C.M. (1:6) on fair faces of brick work finished even and fair without using extra cement.complete all as specified and as directed. |
| 98 | M&L Applying two coats of acrylic distemper to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment complete all as specified and as directed. |
| 99 | S&F vitreous china Table top Basin of approved shape & size including, waste chain, plug and porcelain stopper, brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 100 | S&F PVC connections with PTMT Nut collar bush and spanner, 600 mm long fixed to 15 mm GI pipe including necessary fixing arrangement as in repair complete all as specified and directed. |
| 101 | S&F Tubular Towel rail brass chromium plated 600mm long 20mm dia D type with chromium plated brass screws and wooden/plastic cleats as in repair complete all as specified and directed. |
| 102 | S&F Swivel Shower Rose with Arms of Chromium Plated for fixing with 15mm bore (dia) Pipe and fixed-in-repairs, complete all as specified and as directed. |
| 103 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster fabric weight not less than 160gms per Sqm by torch application over a coat of bituminous primer @0.5Kg/Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including removal and refixing of PVC tank any capacity on same place with all required necessary fittings complete all as specified and as directed. |
| 104 | S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws complete all as specifed and as directed. |
| 105 | S&F Powder Coated aluminium frame (minimum thickness of powder coating 50 micron) (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 106 | S & F powder coated aluminium door shutters (Thickness or powder coating not less than 50 micron)., aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 107 | S& F 5.0 mm thick sheet glass ordinary/tinted/filmed to match exixting quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares complete all as specifed and as directed. |
| 108 | M & L for Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 109 | S & F Plain mild steel wire 4 mm dia, galvanised class 3, for hanger including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and as directed. (each line of wire to be measured) |
| 110 | M&L for 100 mm thick PCC 1:2:4 type C2 using (40 mm graded aggregate) as in path, pavings hardstanding including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed. |
| 111 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. including cutting chases of exsisting wall for wall taking out concealed conduit ec. and making good disturbed surfaces of walls, floors, etc as per existing specification after providing point wiring under respective items here-in-below complete all as specified and as directed. |
| 112 | Taking down main switches and DBs of any type and make including wooden board / junction box.complete all as specified and as directed. |
| 113 | M&L for concealed point wiring for one Light/ Fan/ Bell point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20 mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, with and including modular metal flush box and Modular white Cover Plate with Frame for fixing modular switches, sockets fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be sone through proper size of copper/brass thimbles complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 114 | All as per item No. 113 here-in- before but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and as directed. |
| 115 | All as per item No. 113 here-in- before but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable complete all as specified and as directed. |
| 116 | All as per item No. 113 here - in - before but for 5 Amps socket point on the same board controlled by one switch.complete all as specified and as directed. |
| 117 | Ditto as per Item No 113 above but for one light point controlled by two way switches complete all as specified and as directed. |
| 118 | S&F modular switch flush type, 6 Amp, one way ,1 module complete all as specified and as directed. |
| 119 | S&F modular socket outlet, 3 pin, 6 Amp, flush type 2 module complete all as specified and as directed. |
| 120 | S&F modular switch, 16 Amp flush type 1 module complete all as specified and as directed. |
| 121 | S&F modular socket outlet, 3 pin, 6/16 Amp flush type 2 module complete all as specified and as directed. |
| 122 | M&L for switch piano (flush button type) single pole, one way, 5 Amps. complete all as specified and as directed. |
| 123 | S&F switch flush type, 5 Amps, SP, two way. Make Anchor complete all as specified and as directed. |
| 124 | S&F switch bell push flush type 5 Amps. Make Anchor complete all as specified and as directed. |
| 125 | M&L for switch socket Combination 2 in one, 5 Amps, 240 Volts flush type complete all as specified and as directed. |
| 126 | M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal. complete all as specified and as directed. |
| 127 | Supply and fix fan regulator electronic, step type complete all as specified and as directed. |
| 128 | S&F call bell Dingdong type AC 230 Volts single pole. complete all as specified and as directed. |
| 129 | S&F ceiling rose surface backelite three terminals. complete all as specified and as directed. |
| 130 | Supply and fix LED tube light fitting of 18 W (4 Ft) 240 V Wall mounted LED batten aluminium houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories internally pre-wired and inclg connection. complete all as specified and as directed. |
| 131 | All as item no 130 above but LED batten 9 watt 2 ft long |
| 132 | S&F Decorative wall light fixture made out of polycarbonate, suitable with 7 watt LED Bulb complete all as specified and directed |
| 133 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including provision of fan hook complete all as specified and directed |
| 134 | M&L complete for pvc exhaust fan of size 250 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements.complete all as specified and as directed. |
| 135 | M&L complete for metal body exhaust fan of size 300 mm sweep, single phase,230 volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements. complete all as specified and as directed. |
| 136 | Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W, thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed. |
| 137 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripple pole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and as directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 138 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incomming end complete all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 139 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed. Note- The cost of Blanking plate if required shall deemed to be included in the unit price. |
| 140 | S & F MCB 'C' series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed |
| 141 | S & F MCB 'C' series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed |
| 142 | S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed |
| 143 | M&L in repair for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed FRLSH copper conductor cable, 1100 Volt, and one run of copper earth wire 4 Sq mm drawn through PVC conduit and all accessories,including cutting chases of exsisting wall, making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 144 | M&L in repair for sub main wiring with Four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and two run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 145 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 3.5 core. complete all as specified and as directed.Note: 1. Excavation and earth work will be measured and paid seperately. |
| 146 | M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 147 | M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed. |
| 148 | Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable complete all as specified and directed. |
| 149 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I |
| 150 | Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed. |
| 151 | Supply and fix in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 ltrs all as specified in SSR Part I including all its accessories complete all specified and directed. |
| 152 | Taking up GI water tubing 25 mm bore from trenches / floor including all fittings, segregated and stacking the pipe complete all as specified and as directed. |
| 153 | Supply, lay and fix 25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. |
| 154 | Supply and fix Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 155 | Supply and fix Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 156 | NOTES:1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender