Tender For Repair To Road, Path, Culverts And Road Furniture In Zone-Vi, Vii, Mg Zone & Outer Perimeter At Tbrl Range Ramgarh.
Tender Value
40.77 Lakhs
Estimated cost
Bid Submission
29 Sep 2026
20 days left
EMD
81540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Road, Path, Culverts And Road Furniture In Zone-Vi, Vii, Mg Zone & Outer Perimeter At Tbrl Range Ramgarh.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for repair to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc, cutting around edges making good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30mm rolled and compacted to required camber and gradient with 8 to 12 tonne power roller, complete all as specified and directed. |
| 2 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area n.exc 400 Sqm and exc 50 mm and n.exc 100 mm deep complete all as specified and directed. |
| 3 | Preparing old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10kg per 10 sq metre over bituminous macadam complete all as specified and directed. |
| 4 | Material and labour for repairs to unlevelled surfaces by filling in premixed bituminous macadam using paving bitumin VG-30 @ 4% by weight of total mix laid, rolled and compacted to required gradient and camber with 8 to 12 tonne power roller (consolidated thickness of 75mm or less) and laid by mechanical paver finisher complete all as specified and directed. |
| 5 | Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleared surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat with bituminous primer by using paving bitumen of VG-10 grade @ 5 kg/10 Sqm complete all as specified and directed. |
| 6 | Material and labour for laying, spreading 30mm thick (consolidated thickness) bituminous premix semi dense asphaltic concrete with 5.5% binder content of bitumen of VG-30 grade by weight of total mix, made with self propelling mechanical paver, rolled and consolidated to reqd camber and gradient with 8 to 12 tonne power roller to a uniform smooth surface complete all as specified and directed.Note :- (i) Work shall be executed as per design mix approved by the GE.(ii) Filler shall be cement (OPC-43 Grade)(iii) Any variatiion in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the department. However, if binder content works out to be on minus side during design process (i.e less than 5.50%) same shall be adjusted considering the bitumen rate given in particular specification. |
| 7 | Material and labour for painting lines, dashes, arrows, letters, etc. with adequate no of coats on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow complete all as specified and directed. |
| 8 | Supply and fixing in repair solar powered LED road studs /cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency monocrystalline solar panel 2.4V/ 0.3 watt one NI-Cd rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions etc. complete all as specified and directed. |
| 9 | Supply and fixing in repair for metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 10 | Supply and fixing in repairs road studs/cat eye reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 11 | Clearance of road side berms including removing bushes, vegetation growth including taking out roots of bushes/ vegetation growth upto 30 cm depth and disposal of rubbish to a distance not exc. 100m complete all as specified and directed. |
| 12 | Demolition of cement concrete of any description and in any position complete all as specified and directed. |
| 13 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 14 | Material and labour for preparation of new/old concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 15 | Demolition of concrete in ground floors and pavings exc 15 cm thickness above ground floors complete all as specified and directed. |
| 16 | Material and labour for cement concrete work as in pavement/ hardstanding of flexural strength 40 Kg/sqcm in field using 400 kg of cement per cum, thickness of concrete 25 cm or less including necessary form work etc complete all as specified and directed.Note: -1. Concrete shall be laid in panel as directed by Engr in charge.2. Joint shall be measured and paid for seperatly. Surface shall be broomed finish. |
| 17 | Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in 200mm thick slab complete all as specified and directed. |
| 18 | Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed. |
| 19 | Material and labour for old size brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 20 | All as per srl no 19 above but except bricks complete all as specified and directed. |
| 21 | Material and labour for rendering 15 mm thick on fair surface of concrete surface in CM (1:4) using WPC @ 3% by weight of cement.Note- WPC shall be measured and paid for seprately. |
| 22 | Supply only liquid water proofing compound. |
| 23 | Material and labour for two coats of cement base paint over a coat of white wash on new plastered surfaces including preparation of surfaces and applying clear colle on plastered and other surfaces complete all as specified and directed. |
| 24 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 25 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Thermo-Mechanically Treated bars of grade Fe-500D or more complete all as specified and directed. |
| 26 | Material and labour for PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete complete all as specified and directed. |
| 27 | Material and labour for walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses in M-25 using 20mm graded aggregate complete all as specified and as directed. |
| 28 | Material and labour for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in M-25 using 20mm graded aggregate complete all as specified and directed. |
| 29 | Material and labour for foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete in M-25 using 20mm graded aggregate complete all as specified and directed. |
| 30 | Formwork to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick complete all as specified and directed. |
| 31 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter complete all as specified and directed. |
| 32 | Material and labour for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 33 | Material and labour for applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysOct 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender