Tender For Restoration Of Rain Damages Of Lwss Dhirar Paplah Phase-2Nd In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Construction of Retaining Wall, Plinth Protection And White Washing, Painting Etc.) (Under Pdna)
Tender Value
7.35 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
2 days left
EMD
14704
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Lwss Dhirar Paplah Phase-2Nd In Tehsil. Bhoranj, Distt. Hamirpur Hp (Sh: Construction of Retaining Wall, Plinth Protection And White Washing, Painting Etc.) (Under Pdna)
BOQ
| Sl. No. | Item Description |
| 1 | Removal of slips in all kinds of soil including saturated soil but excluding boulders and rocky portion requiring blasting upto a distance of 20 mtrs disposing of un-serviceable materials, stacking serviceable materials and neatly dressing the surface complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 2 | Excavation in foundation, trenches etc. in all kinds of soil such as pick work, jumper work, jumper blast,blasting soft / hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer- in- charge clear from the edge of excavation and then returning the stacked soil in 15 cm layer when required into plinth and side of foundation etc. Consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth by the Engineer- in- chargeup in all leads and lift.PJ50% each |
| 3 | Prov.and lying cement concrete 1:5:10 (1Cement: 5Sand: 10 Graded stone agg.40mm nominal size) with 15% plum & curing complete excluding cost of form work and cement in retaining Walls/ Breast Walls , the size of plums shall usually be 150 mm to 300 mm as per HPPWD specification. |
| 4 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden batten and ballies, in all heights of propping and centring below supporting floor to ceiling upto all height and removal of the same for insitu-reinforced concrete and plain concrete work in :- |
| 5 | Vertical surfaces such as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the like in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 6 | Stones/boulders filling behind the Retaining walls also under floor & upstream of Infilteration Gallary/under floor etc. in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge. |
| 7 | Providing and laying cement concrete 1:3:6 ( 1 cement:3 sand :6 graded stone aggregate 20mm nominal size) and curing complete in foundation and plinth. |
| 8 | 15 mmthick cement plastering in single coat on rough side of brike/concrete stone wall for interioe plastering upto floor two level i/c arrises rounded angles chamfer and rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4(1cement:4sand) in all leads and lifts. |
| 9 | Brick work using common burnt clay building brick in foundation and plinth in cement mortar 1:6 (1cement:6 sand) 2nd class brick complete all leads and lifts to the entire satisfaction of Engineer-in-charge. |
| 10 | 20mm thick cement plaster for single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises internal rounded angles chamfers or rounded angles not exeeding 80mm in girth and fixed even smooth in 1:6 (1: cement : 6 sand) within all leads and lifts |
| 11 | Distempering (one coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 12 | Colour washing on undecorated wall surface (two coats) over an including a primary coat of white washing to give an even shade after thoroughly brooming the surface to remove all dirt, dust, motor drops and other foreign matter. |
| 13 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 14 | Painting two coat (excluding Priming coat )on new steel based surface with ready mixed paint brushing to give an even shade I/c cleaning of all dirt dust and other foreign matter, sand papering and stopping with while enamel paint . |
| 15 | Providing and fixing MS steel doors and window Frames of angle size 50x50x6 mm complete in all lead and lift as per entire direction of Engineer-in-charge. |
| 16 | Fixing of Fencing pannel in positing complete in all lead and lift as per entire direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender