Tender For Provision Of Upvc Glazed Partition For Development Of Pgdca / Commerce Room On 2Nd Floor With A Small Cabin For Faculty Of Govt. Degree College Banjar, District Kullu (Hp).
Tender Value
3.56 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
6 days left
EMD
7137
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Upvc Glazed Partition For Development Of Pgdca / Commerce Room On 2Nd Floor With A Small Cabin For Faculty Of Govt. Degree College Banjar, District Kullu (Hp).
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Wood and P.V.C Work |
| 2 | Providing and fixing glazing in UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of UPVC snap beading shall be paid Separately): |
| 3 | a) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) |
| 4 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading |
| 5 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, |
| 6 | plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. |
| 7 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. |
| 8 | Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. |
| 9 | Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: |
| 10 | (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 |
| 11 | (ii) Sites with structure height more than 20m for all wind speeds. |
| 12 | Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. |
| 13 | Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m). |
| 14 | b) Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. |
| 15 | (i) Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (74mm & above). (Height upto 2.5 meter). |
| 16 | Providing and fixing factory made Upvc multi-chambered frame, in tubular section in fixed partition of approved sections in position all complete as per direction Engineer in charge. |
| 17 | a) For fixed portion |
| 18 | i) Upvc tubular section ( code AP201) of size 58X60mm & thickness of wall 2mm |
| 19 | Providing and fixing factory made Upvc beading code (AP-210) size 18 x 35 mm thickness 5 to 6 mm in panneling of partitions all complete as per direction of the Engineer in charge. |
| 20 | a) For fixed portion |
| 21 | i) Upvc beading code (AP 210) size 18x35 mm thickness 5 to 6 mm. |
| 22 | Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. |
| 23 | Sub-Head : Flooring |
| 24 | Providing and fixing High Quality Laminated Wooden Flooring / Wall panneling ( Brand name -Classen -made in Germany ) AC5, 9 mm to 10 mm thick including base of 2 mm thick foam of required colour or shade with necessary adhesive & carrage all complete as per direction & requirement of client departement |
| 25 | Sub-Head : Finishing |
| 26 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 27 | a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 28 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 30 | a) Two or more coats on new work. |
| 31 | Sub-Head : Aluminium Work |
| 32 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 33 | a) Pre-laminated particle board with decorative lamination on both sides Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender