Tender For General-Nambiarkkal Anicut: Kasaragod District-Replacement Of Shutters, Embedded Parts, And Hoist Bridge; Maintenace Of Hoist Mechanisms Of Nambiarkal Anicut In Kanhangad Municipality -General Mechanical Work
Tender Value
44.20 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Nambiarkkal Anicut: Kasaragod District-Replacement Of Shutters, Embedded Parts, And Hoist Bridge; Maintenace Of Hoist Mechanisms Of Nambiarkal Anicut In Kanhangad Municipality -General Mechanical Work
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of shutters, hoist bridge, hoisting mechanisms etc and Cutting and removing of SS embedded parts and stacking. |
| 2 | OD2681/2026-2027:Dismantling the canal shutter ( up to 2 tonne weight)/hoisting unit/ embedded parts etc. of the same and stacking at a distance of 100 metre including hire of machinery, labour etc. complete as directed by the departmental officer at the site. (Weight of the unserviceable shutters and embedded parts may be calculated as 60% and unserviceable hoisting units as 80%) |
| 3 | OD3098/2026-2027:Cutting and removing of SS embedded parts and stacking it at a distance of 50 m, hire charge of machinery, labour and other incidental charges etc complete as per the direction of departmental officer at site |
| 4 | Civil works - Demolishing and concreting works |
| 5 | 15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. |
| 6 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 7 | 4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts |
| 8 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 10 | 4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Supply, fabrication and erection of Stainless steel embedded parts and shutters |
| 12 | OD2666/2026-2027:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 13 | OD3162/2026-2027:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 14 | OD2667/2026-2027:Supply of MS round bar including cost of conveyance charges |
| 15 | OD2664/2026-2027:Fabrication and errection of embedded parts for canal shutters (up to 2 tonne weight) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding the cost of materials already supplied. |
| 16 | OD2665/2026-2027:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete |
| 17 | 85.105:Supply of SS plates of grade 304L including cost of conveyance charges |
| 18 | OD2663/2026-2027:Fabrication of stainless-steel wheel gate (up to 2 tonne weight) in SS 304 L grade and accessories,etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery for welding, shearing, grinding, etc., all lead and lifts, conveyance, incidental and handling, etc. complete but excluding cost of material already supplied. |
| 19 | OD2668/2026-2027:Erection of Canal shutter (upto 2 Tonne weight)/Hoisting bridge/ platform including handrails, ladder, etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges, etc. complete but excluding cost of materials already supplied |
| 20 | Supply and fitting of Rollers and Rubber seals to shutters |
| 21 | 85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing |
| 22 | 85.117:Supplying and fixing in correct position with specified initial interface the Angular type rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings |
| 23 | OD2680/2026-2027:Supplying and fixing stainless steel thrust roller assembly having 120mm Dia., 60mm tread width, SS(304) shaft and accessories as per approved specifications and drawings including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc., complete |
| 24 | Supply of materials, fabrication, painting and erection of hoist bridge, platform, hand rails etc |
| 25 | OD2673/2026-2027:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges |
| 26 | OD2674/2026-2027:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges |
| 27 | OD2678/2026-2027:Supply of MS checquered plates including cost of conveyance charges |
| 28 | OD2672/2026-2027:Supply of 32NB GI pipe for hand rail |
| 29 | OD2679/2026-2027:Supply of M.S Bolt with nut and washer |
| 30 | OD2677/2026-2027:Fabrication and supply of structural steel canal shutters ( up to 2 tonne weight)/ hoisting bridge/platform and acessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied. |
| 31 | OD2676/2026-2027:Painting all the exposed surfaces of the hoist bridge components, ladders, handrails, etc. with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site |
| 32 | OD2675/2026-2027:Erection of Canal shutter (upto 2 Tonne weight)/Hoisting bridge/ platform including handrails, ladder, etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance, lead and lift charges, etc. complete but excluding cost of materials already supplied |
| 33 | Overhauling, erection of existing hoist mechanism and conducting trial run |
| 34 | OD2661/2026-2027:Overhauling of gearbox & screw rods regulator shutter, including cleaning and greasing the gear, screw rod, etc. complete as directed by the departmental officials at site. Cost includes cost of all materials and labour etc. complete. |
| 35 | OD2662/2026-2027:Refitting the already dismantled hoisting unit back in original position after erecting the shutter including correcting position, aligning etc. including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officers at site |
| 36 | OD2660/2026-2027:Refitting the motorized gear box to the hoist operating mechanism and conducting trial run Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender