Tender For Construction Of View Point At Jubdi Mithwani (Limber Wildlife Sanctuary) Baramulla Range Under Capex Budget 2026-27
Tender Value
3 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
8 days left
EMD
6000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of View Point At Jubdi Mithwani (Limber Wildlife Sanctuary) Baramulla Range Under Capex Budget 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excuation by manual means in trenches for foundations drains,pipes,cables etc (not exceeding 1.5 m in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of buttoms lift upto 1.5 m,including getting out excavated earth and disposal of surplus excavated earth asa directed:All kinds of soil;1 meter from cutting edge |
| 2 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc.upto a lead of 15 km |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Mud mat |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering,finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Form WorkCentering and shutteringincluding struting propping etc. and removal of form for foundation,footing, bases of columns etc.for mass concrete |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete at plinth beamlevel and DPC level Thermo-Mechanically Treated bars of grade Fe500D or more.Reinforcement @ for all rcc work |
| 8 | P/F ribcolor coated corrugated galvanized PPGI sheet 1000 to 1020mm cover width 28.35 mm high crests at 250 to 255 mm TCT (total coated thickness )high tensile SMP Galvalumesteel with siloicon modified polyster coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primercoats on both surfaces ineld,side and end lap andusing 8mm galvalime hex selfdriling fastener on each crest of sheet for connection with purlins and seam bolts at 300 mm centers on all side and end lapps ets (measured for unit of laid areas 0.50 mm Thick (TATA,JSWOR EQ brand )I/C ALL CARRIAGE/H/LOAD ie 60 cm wide ridges and valleys wherever required incl all fittings and fixtures in roof sheeting |
| 9 | Random Rubble masonary with hard stone in foundation and plinth including leveling up with cement concrete 1;6;12 (1 cement:6 coarse sand;12 graded stone aggregate 20 mm nominal size) upto plinth level and curing complete with :cement mortar 1:6 (1 cement :5 coarse sand )stone available at site |
| 10 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coatof approved steel primer all complete. Welded |
| 11 | Providing hoisting and fixing trusses//purlins/rafters/posts/post-plates or like component including cost of screws etc,complete first class Budloo/Fir wood |
| 12 | providing wood work in frames of doors,windows,clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dask fasteners of required dia and length KD wood or Equivalent |
| 13 | Sand Stone Flooring 40 mm thick fine dressed stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement ;5 coarse sand)with joints finished flush and curing complete :Red sand sstone |
| 14 | Two or more coats applied @ 1.25 liter/10 sqm over and including one coat of special primer applied @0.75 liter/10 sqm |
| 15 | Carriage of different material by mechanical transport incl loading unloading and for stacking at site sand 30 km |
| 16 | Steel 30 km |
| 17 | Cement 30 km |
| 18 | Timber 30 km |
| 19 | Aggregriate 30 km |
| 20 | Carriage of different material by manual labour incl loading unloading and for a lead of 100 meter Sand |
| 21 | steel |
| 22 | Cement |
| 23 | Timber |
| 24 | Aggregiate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender