Tender For Addition And Alteration Work In Slbsgmc&H Nerchowk, Distt. Mandi (Hp) (Sh:- Construction Of Toilet In Psychiatry Ward At 3Rd Floor And Main Ot In 6Th Floor).
Tender Value
1.73 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
7 days left
EMD
3500
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addition And Alteration Work In Slbsgmc&H Nerchowk, Distt. Mandi (Hp) (Sh:- Construction Of Toilet In Psychiatry Ward At 3Rd Floor And Main Ot In 6Th Floor).
BOQ
| Sl. No. | Item Description |
| 1 | Half brick masonry with common burnt clay F.P.S. (non modular) brickd of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement : 4 coarse sand) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 2 | 15 mm cement plaster on rough side single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) including carriage of material with all leads and lifts and other incidentals and as per the direction of the Engineer-in-charge. |
| 3 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including the cost of all hardwares including aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and direction of Engineer-in-charge. Frame work for door window/fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) in white shade including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including the cost of all hardwares including aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per architectural drawings and direction of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 5 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type 11, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge : Pre-laminated particle board with decorative lamination on both sides including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 6 | Providing and fixing aluminium sliding door bolts 250X16 mm, ISI marked anodised (anodic coating not less than grade AC10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 7 | Providing and fixing aluminium tower bolts 200X10 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 8 | Providing and fixing aluminium handles 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 9 | Providing and laying matte finish full body vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete : 600x600 mm of Kajaria Nito Orient or its equivalent. (Floor Tiles) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 10 | Providing And fixing glazed Digital tiles 300x600 x 8 mm thick of approved Shade and manufacturer in skirting risers of steps and dadoed 12 mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with cement slurry (Wall Tiles) including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 11 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 12 | Distempering with Oil Bond Distemper (OBD) of approved brand and manufacture to give an even shade : New work (Two or more coats) over and including water thinnable priming coat with cement primer including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 13 | Providing and fixing CPVC pipe 20 mm CPVC Pipe complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 14 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) Pure EWC conventional cat. no. 2008 of Cera or its equivalent in white shade with seat and lid, with low level white P.V.C. pure flushing cistern cat no.2602 of Cera or its equivalent having dual flush system, including flush pipe, with manually controlled device, conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 15 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin with half pedestal OPS-WHT-15801 size 575x470x190 mm opel series of Jaquar or its equivalent including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 16 | Providing and fixing P.V.C. Semi rigid pipe 40mm dia waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 17 | Providing and fixing unplasticised PVC connection pipe with brass unions 45 cm length 15 mm nominal bore including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 18 | Providing and fixing beveled edge mirror of superior glass 600x450 mm (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 19 | Providing and Fixing Piller cock cat. No. OPP-15001 PM of Jaquar or equivalent complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 20 | Providing and Fixing Angular stop cock with wall flange of opel prime no. OPP-15053PM Jaquar or equivalent including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 21 | Providing and fixing recessed type Soap dish stainless steel AHS 1531 of hotelier series of Jaquar or equivalent including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 22 | Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 23 | Providing and fixing C.P grating Circular type of approved quality and colour including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 24 | Providing and fixing ball valve (brass) 15 mm nominal bore of approved quality, High or low pressure, with plastic floats complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 25 | Providing and fixing high pressure PVC spigot and socket 110 mm PVC Pipe, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 26 | Providing and fixing PVC floor trap 110 mm X 90 mm of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. |
| 27 | Providing and fixing PVC door bend 110 mm dia with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including carriage of materials within all leads and lifts complete in all respect as per direction and satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender