Tender For Construction Of Toilet Block At The Dm Office Premises And Renovation Work Of Ground Floor Toilet Block At Administrative Building Of Cooch Behar Zilla Rmc
Tender Value
5.27 Lakhs
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
10544
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coochbehar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Toilet Block At The Dm Office Premises And Renovation Work Of Ground Floor Toilet Block At Administrative Building Of Cooch Behar Zilla Rmc
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Toilet BlockEarth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75m. as directed. The item includes necessary trimmingthe sides of trenches, levelling, dressing andramming the bottom, bailing out water as requiredcomplete.(a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation. |
| 3 | A)Filling in foundationorplinthby silver sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, rammingcompleteincludingthecostofsupplyof sand. (payment to bemade onmeasurement offinished quantity |
| 4 | Single Brick Flat Soling of picked jhama bricks includingramming and dressing bed to proper level and filling joints withlocal sand. |
| 5 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety In ground floor (a) 1:3:6 proportion |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.ii) Pakur Varityin Ground Floor |
| 7 | Reinforcement for reinforced concrete work in all sorts ofstructures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and up to roof of ground floor/up to 4 m.(i) Tor steel/Mild steel.I. Other than TATAin Ground Floor - |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 9 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge |
| 10 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 11 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 12 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) inground floor. |
| 13 | 25mm. thick damp proof course with cement concrete with stone chips (1:1.5:3) [with graded stone aggregate 10 mm nominal size] and admixture of water proofing compound as per manufacturer's specification followed by two coat ofpolymer based paint, (1st coat after 4 to 5 days of concrete laying and 2 nd coat just before brick masonry work) as directed (cost of water proofing compound & polymer based paint to be paid separately).( Chequering not required overconcrete or painted surface). |
| 14 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface](i) With 1:6 cement mortar(b) 20 mm. thick plaster |
| 15 | (ii) With 1:4 cement mortar(b) 15 mm. thick plaster |
| 16 | (ii) With 1:4 cement mortar(c) 10 mm. thick plaster |
| 17 | Neat cement punning about 1.5mm thick in wall,dado,windowsill,floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 18 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testingperformance criteria..(ii) 66mm x 90mm |
| 19 | Supplying, fitting& fixing fibre reinforced polymer (FRP) Composite door shutte rsasper approved designwithglassfib rerein forcedplasticmouldedskinsandaspecialsandwichcore,soastoimpartmonolitaheiccompositestructureas per approved technology ofDepartment of Science andTechnology (DST) tosatisfy IS:4020 door testing performance criteria.In ground floor(32mm thick) |
| 20 | C) Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White) |
| 21 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:vii) 225 mm long x 10 mm dia. bolt |
| 22 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vii) 100mm. X 58mm. X 1.90mm. |
| 23 | Supplying, fitting and fixing M.S. clamps for door andwindow frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm Length |
| 24 | (a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. |
| 25 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats |
| 26 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.In Ground floor:(iii) Two coats. |
| 27 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 28 | Page No. 64, Item No. 35 (B) (a) (i)& 3rd corrigenda & addenda (A) Floor a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 29 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 30 | Supplying1.5mmthickM.S. sheet fittedand fixedononeorboth faces ofM.S./W.I. Gate etc.withpointweldingat notmore than150mm apar tcomplete inallrespectasperdesignincludingcostofall labour and materials. |
| 31 | (a)Primingonecoat onsteel orothermetal surface with syntheticoil bound primerofapproved quality including smooth ening surfaces bysandpapering etc |
| 32 | (A)Paintingwithbest qualitysyntheticenamel paint of approved make and brand including smoothening surface by sandpaperingetc. Including using of approved putty etc. on the surface, if necessary : |
| 33 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approvedpaint in any position above ground. (Payment will be made on the centre |
| 34 | (b) (ii) 20 mm dia.medium quality |
| 35 | (c) (ii) 25 mm dia.medium quality |
| 36 | B) For Concealed Work (a) 15 mm dia. medium quality |
| 37 | (b) 20 mm dia. medium quality |
| 38 | c) 25 mm dia. medium quality |
| 39 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (iv) 32 mm |
| 40 | Supplying, fitting and fixing bib cock or stop cock.ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model- Tropical / Sumthing Special ofESSCO or similar brand) |
| 41 | Supplying, fitting and fixing pillar cock of approved make) (ii) CP Pillar Cock Super Deluxe with Aerator- 15 mm. (Equivalent toCode No. 508 & Model No. Tropical / Sumthing Special of ESSCO orsimilar brand). |
| 42 | d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 43 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.ii) C. P. Flush Pipe |
| 44 | Supplying,fitting and fixing approved brand 32mm dia.P.V.C.wastepipe,with PVC coupling at one end fitted with necessary clamps. (ii) 750 mm long |
| 45 | Supplying,fitting and fixing steel reducing bush.(i) 20 mm X 15 mm and below |
| 46 | Supplying P.V.C. water storage tank of approved quality with closed top with lid. (Black) - Multilayer.(b) 1000 litre capacity |
| 47 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size |
| 48 | Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 1970 and I.S. 1729/1964 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will be paid seperately). (a) With valamoid joints including sealing with sand cement mortar(4:1) upto quarter depth. (ii) 100 mm dia. (internal) |
| 49 | Supplying, fitting & fixing Cast iron single branch equal with door conforming to I.S. 1729/1970 including joining and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).(a) With valamoid joints including sealing the top with cement mortar (4:1) (ii) 100 mm dia. |
| 50 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concretingat bottom and sides). (iii) 150 mm |
| 51 | supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing)ii) 510 mm long |
| 52 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent) |
| 53 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P hinges, rubber buffer and brass screws complete.(b) Anglo Indian ii) Plastic (hallow type) white |
| 54 | Syston fixing Supplying, fittingandfixing10litreP.V.C. low-down cistern conforming to I.S. specification with P.V.C. gscomplete,C.I. brackets includingtwocoats of painting to bracket etc. |
| 55 | Supplying, fitting and fixing porcelain partition wall of approved make of size 618 mm X 310 mm complete in all respect. |
| 56 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.c) C.P. urinal flush pipe fittings range of three |
| 57 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm |
| 58 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(iii) 25 mm dia and 750 long. |
| 59 | Supplying, fitting and fixing liquid soap container. b) PTMT(Prayag or equivalent) |
| 60 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 635 mm X 395 mm X 420 mm |
| 61 | Supplying,fittingand fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.ii) 450 mm long |
| 62 | Supplying,fitting andfixing approved brand 32mmdia.P.V.C.wastepipe, with PVC coupling at one end fitted with necessary clamps ii) 750 mm long |
| 63 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm |
| 64 | Supply and instalation single phase of 1 HP Mini MONOBLOC PUMP having following capasity discharge range 4200l/h -640l/h & Model no-S1 |
| 65 | Renovationwork of Toilet Blocki) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.ii) Godrej Hydraulic door closer fitted and fixed complete.(a) Heavy type |
| 66 | (i) Door stopper.(Brass) |
| 67 | C) Supplying Heavy Duty Aluminium Handle (EBCO Type) (Natural White) |
| 68 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(iv) 150mm long x 10mm dia. bolt. |
| 69 | (a) Supplying 'Godrej' mortice lock chromium plated with latch and keys 4 levers, including fitting and fixing complete. |
| 70 | Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be ofsize of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pastedprofile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge.a) Factory made Single piece non decorative extruded PVC profiles door |
| 71 | Supplying, fitting and fixing bib cock or stop cock.(c) (i) Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar brand). |
| 72 | Refixing flush pipe/ M.S. bend/ C.P. flush pipe with I.R. adapter. |
| 73 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.ii) C. P. Flush Pipe |
| 74 | Dismantling Indian W.C. including taking out base concrete as necessary. |
| 75 | Refixing E.P. or Anglo-Indian W.C. |
| 76 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.c) C.P. urinal flush pipe fittings range of three |
| 77 | Supplying, fittingandfixing10litreP.V.C. low-downcisternconformingto I.S. specificationwithP.V.C. fittingscomplete,C.I. brackets includingtwo coats of painting to bracket etc. |
| 78 | Supplying, fitting and fixing liquid soap container. b) PTMT(Prayag or equivalent) |
| 79 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame ofany colour, frame size 550 mm X 400 mm |
| 80 | Rectifying leakage of W.C. by new joints by methor mistry. |
| 81 | Cleaning E.P. or Anglo-Indian W.C. with acid. |
| 82 | Cleaning urinal with channel with acid. |
| 83 | Cleaning and polishing marble or mosaic partition including removing stains. |
| 84 | Add GST @Rs.18% |
| 85 | Add Labour Cess @Rs.1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender