Health and Family Welfare Boards / Undertakings / PSU Closing in 18 days TDR #57382227

Bids Are invited for Tens (Transcutaneous Electrical Nerve Stimulator) - Four-Channel Tens System With Four Independently Controllable Output Channels. , Suitable For Clinical/Hospital Physiotherapy Use And Capable Of Continuous Operation For Routine

Issued by Boards / Undertakings / PSU · Muzaffarpur, Bihar
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Sep 2026
18 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Muzaffarpur → Bihar
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Tens (Transcutaneous Electrical Nerve Stimulator) - Four-Channel Tens System With Four Independently Controllable Output Channels. , Suitable For Clinical/Hospital Physiotherapy Use And Capable Of Continuous Operation For Routine Patient Treatments. , Microprocessor-Controlled Operation With User-Selectable Treatment Parameters. , Portable, Compact And Lightweight Construction With Clearly Labelled Controls. , Independent Intensity/Current Control And Parameter Display For Each Channel. , Treatment Settings Shall Be Adjustable By The Operator And Shall Include Provision For Saving/Recalling Commonly Used Programs Or User Memories. , Minimum 20 User-Programmable/User-Memory Settings Preferred. , Output Mode: Constant-Current Or Otherwise Regulated Patient-Safe Output Suitable For Tens Therapy. , Provision For Conventional/Continuous Stimulation And Burst/Modulated Stimulation Modes. , At Least 4 Output Channels, With Independent Control Of Stimulation Intensity For Each Channel. , Output Shall Incorporate Appropriate Patient Safety Controls To Prevent Unintended Excessive Stimulation. , Output Shall Automatically Return To A Safe/Zero Level When A Channel Is Activated Or A Treatment Is Restarted, As Applicable , Treatment Timer: Adjustable, Preferably From 0–60 Minutes Or Wider. , Pulse Frequency: Adjustable Over A Clinically Useful Range, Preferably Approximately 2–250 Hz Or Wider. , Pulse Width/Duration: Adjustable Over A Clinically Useful Range, Preferably Approximately 20–250 Microseconds Or Wider. , Provision For Burst Frequency/Rate Or Burst Mode, Where Applicable. , Provision For Intensity Adjustment Independently For Each Channel. , Parameters Shall Be Displayed Clearly And Shall Remain Stable During The Treatment Cycle Unless Intentionally Modified By The Operator. , Minimum 15 Pre-Programmed Pain-Relief/Analgesic Or Tens Treatment Programmes. , Minimum 5 Additional Programmes Suitable For Fitness/Conditioning Or Physiotherapy Applications, Or Equivalent User-Selectable Programmes. , Programmes Shall Be Selectable Through A User-Friendly Keypad/Touch Keys Or Equivalent Interface. , Manual Mode Shall Be Available For Setting Treatment Parameters According To Clinical Requirement. , Lcd Or Equivalent Digital Display For Treatment Parameters, Programme Selection, Timer And Channel/Intensity Status. , Display Shall Be Clearly Visible And Legible During Normal Clinical Use. , Soft-Touch Membrane Keys, Push Keys, Rotary Controls Or Equivalent Durable Controls May Be Provided. , Visual Indication Of Active Output Channels And Treatment Status. , Audio/Visual Indication Of Completion, Error, Electrode Disconnection Or Other Relevant Safety Conditions, Where Applicable. , Equipment Shall Operate From Standard Indian Hospital Mains Supply, 230 V Ac, 50 Hz, Or Through An Integral/Adaptor Power Supply Compatible With 100–240 V Ac, 50/60 Hz. , Built-In Rechargeable Battery Shall Be Provided For Portable Operation. , Battery Backup Shall Be Minimum 5 Hours Under Typical Operating Conditions Or Equivalent Clinically Adequate Backup , Battery Charging Status Indication Shall Be Provided. , Battery Shall Be Replaceable/Serviceable By The Manufacturer Or Authorised Service Personnel. , Quoted Model Should Comply With Applicable Requirements Of Iec 60601-1, Ce/Us Fda, Iso 13485 And Iso 10993 Approved Certificates. , Applied Part Shall Be Suitable For Patient Use And Shall Have Appropriate Protection Against Electric Shock. , Equipment Shall Have Appropriate Protection Against Over-Current, Output Fault And Electrode Disconnection. , Leakage Current And Patient Auxiliary Current Shall Comply With The Applicable Medical Electrical Equipment Standards. , Equipment Shall Be Supplied With Appropriate Electrical Safety Classification As Per The Applicable Standard. , Manufacturer Shall Provide Valid Test/Certification Documents Demonstrating Conformity To Applicable Regulatory And Safety Requirements. , Compact, Robust And Easy-To-Clean Enclosure Suitable For Hospital/Physiotherapy Department Use. , Dimensions And Weight Shall Be Suitable For Tabletop/Portable Operation; Preferably Not More Than Approximately 2 Kg Excluding Accessories. , Materials Shall Be Durable, Corrosion-Resistant And Suitable For Routine Cleaning With Hospital-Approved Disinfectants. , No Sharp Edges Or Exposed Conductive Parts Shall Be Accessible To The Operator/Patient During Normal Use. , Complete Set Of Patient Connecting/Output Leads For All Channels. , Patient Electrodes: Reusable And/Or Compatible Disposable Electrode Sets, As Applicable. , Minimum One Complete Set Of Electrodes For Each Output Channel Shall Be Supplied. , Power Cord/Adapter And Battery Charger, As Applicable. , User/Operator Manual In English. , Service/Maintenance Manual Or Technical Documentation, Where Available. , Any Special Cables, Connectors Or Accessories Required For Safe And Complete Operation Shall Be Supplied.

BOQ

Sl. No. Item TitleItem Description
1Four-channel TENS system with four independently controllable output channels.Four-channel TENS system with four independently controllable output channels.
2Suitable for clinical/hospital physiotherapy use and capable of continuous operation for routine patient treatments.Suitable for clinical/hospital physiotherapy use and capable of continuous operation for routine patient treatments.
3Microprocessor-controlled operation with user-selectable treatment parameters.Microprocessor-controlled operation with user-selectable treatment parameters.
4Portable, compact and lightweight construction with clearly labelled controls.Portable, compact and lightweight construction with clearly labelled controls.
5Independent intensity/current control and parameter display for each channel.Independent intensity/current control and parameter display for each channel.
6Treatment settings shall be adjustable by the operator and shall include provision for saving/recalling commonly used programs or user memories.Treatment settings shall be adjustable by the operator and shall include provision for saving/recalling commonly used programs or user memories.
7Minimum 20 user-programmable/user-memory settings preferred.Minimum 20 user-programmable/user-memory settings preferred.
8Output mode: constant-current or otherwise regulated patient-safe output suitable for TENS therapy.Output mode: constant-current or otherwise regulated patient-safe output suitable for TENS therapy.
9Provision for conventional/continuous stimulation and burst/modulated stimulation modes.Provision for conventional/continuous stimulation and burst/modulated stimulation modes.
10At least 4 output channels, with independent control of stimulation intensity for each channel.At least 4 output channels, with independent control of stimulation intensity for each channel.
11Output shall incorporate appropriate patient safety controls to prevent unintended excessive stimulation.Output shall incorporate appropriate patient safety controls to prevent unintended excessive stimulation.
12Output shall automatically return to a safe/zero level when a channel is activated or a treatment is restarted, as applicableOutput shall automatically return to a safe/zero level when a channel is activated or a treatment is restarted, as applicable
13Treatment timer: adjustable, preferably from 0–60 minutes or wider.Treatment timer: adjustable, preferably from 0–60 minutes or wider.
14Pulse frequency: adjustable over a clinically useful range, preferably approximately 2–250 Hz or wider.Pulse frequency: adjustable over a clinically useful range, preferably approximately 2–250 Hz or wider.
15Pulse width/duration: adjustable over a clinically useful range, preferably approximately 20–250 microseconds or wider.Pulse width/duration: adjustable over a clinically useful range, preferably approximately 20–250 microseconds or wider.
16Provision for burst frequency/rate or burst mode, where applicable.Provision for burst frequency/rate or burst mode, where applicable.
17Provision for intensity adjustment independently for each channel.Provision for intensity adjustment independently for each channel.
18Parameters shall be displayed clearly and shall remain stable during the treatment cycle unless intentionally modified by the operator.Parameters shall be displayed clearly and shall remain stable during the treatment cycle unless intentionally modified by the operator.
19Minimum 15 pre-programmed pain-relief/analgesic or TENS treatment programmes.Minimum 15 pre-programmed pain-relief/analgesic or TENS treatment programmes.
20Minimum 5 additional programmes suitable for fitness/conditioning or physiotherapy applications, or equivalent user-selectable programmes.Minimum 5 additional programmes suitable for fitness/conditioning or physiotherapy applications, or equivalent user-selectable programmes.
21Programmes shall be selectable through a user-friendly keypad/touch keys or equivalent interface.Programmes shall be selectable through a user-friendly keypad/touch keys or equivalent interface.
22Manual mode shall be available for setting treatment parameters according to clinical requirement.Manual mode shall be available for setting treatment parameters according to clinical requirement.
23LCD or equivalent digital display for treatment parameters, programme selection, timer and channel/intensity status.LCD or equivalent digital display for treatment parameters, programme selection, timer and channel/intensity status.
24Display shall be clearly visible and legible during normal clinical use.Display shall be clearly visible and legible during normal clinical use.
25Soft-touch membrane keys, push keys, rotary controls or equivalent durable controls may be provided.Soft-touch membrane keys, push keys, rotary controls or equivalent durable controls may be provided.
26Visual indication of active output channels and treatment status.Visual indication of active output channels and treatment status.
27Audio/visual indication of completion, error, electrode disconnection or other relevant safety conditions, where applicable.Audio/visual indication of completion, error, electrode disconnection or other relevant safety conditions, where applicable.
28Equipment shall operate from standard Indian hospital mains supply, 230 V AC, 50 Hz, or through an integral/adaptor power supply compatible with 100–240 V AC, 50/60 Hz.Equipment shall operate from standard Indian hospital mains supply, 230 V AC, 50 Hz, or through an integral/adaptor power supply compatible with 100–240 V AC, 50/60 Hz.
29Built-in rechargeable battery shall be provided for portable operation.Built-in rechargeable battery shall be provided for portable operation.
30Battery backup shall be minimum 5 hours under typical operating conditions or equivalent clinically adequate backupBattery backup shall be minimum 5 hours under typical operating conditions or equivalent clinically adequate backup
31Battery charging status indication shall be provided.Battery charging status indication shall be provided.
32Battery shall be replaceable/serviceable by the manufacturer or authorised service personnel.Battery shall be replaceable/serviceable by the manufacturer or authorised service personnel.
33Quoted model should comply with applicable requirements of IEC 60601-1, CE/US FDA, ISO 13485 and ISO 10993 approved certificates.Quoted model should comply with applicable requirements of IEC 60601-1, CE/US FDA, ISO 13485 and ISO 10993 approved certificates.
34Applied part shall be suitable for patient use and shall have appropriate protection against electric shock.Applied part shall be suitable for patient use and shall have appropriate protection against electric shock.
35Equipment shall have appropriate protection against over-current, output fault and electrode disconnection.Equipment shall have appropriate protection against over-current, output fault and electrode disconnection.
36Leakage current and patient auxiliary current shall comply with the applicable medical electrical equipment standards.Leakage current and patient auxiliary current shall comply with the applicable medical electrical equipment standards.
37Equipment shall be supplied with appropriate electrical safety classification as per the applicable standard.Equipment shall be supplied with appropriate electrical safety classification as per the applicable standard.
38Manufacturer shall provide valid test/certification documents demonstrating conformity to applicable regulatory and safety requirements.Manufacturer shall provide valid test/certification documents demonstrating conformity to applicable regulatory and safety requirements.
39Compact, robust and easy-to-clean enclosure suitable for hospital/physiotherapy department use.Compact, robust and easy-to-clean enclosure suitable for hospital/physiotherapy department use.
40Dimensions and weight shall be suitable for tabletop/portable operation; preferably not more than approximately 2 kg excluding accessories.Dimensions and weight shall be suitable for tabletop/portable operation; preferably not more than approximately 2 kg excluding accessories.
41Materials shall be durable, corrosion-resistant and suitable for routine cleaning with hospital-approved disinfectants.Materials shall be durable, corrosion-resistant and suitable for routine cleaning with hospital-approved disinfectants.
42No sharp edges or exposed conductive parts shall be accessible to the operator/patient during normal use.No sharp edges or exposed conductive parts shall be accessible to the operator/patient during normal use.
43Complete set of patient connecting/output leads for all channels.Complete set of patient connecting/output leads for all channels.
44Patient electrodes: reusable and/or compatible disposable electrode sets, as applicable.Patient electrodes: reusable and/or compatible disposable electrode sets, as applicable.
45Minimum one complete set of electrodes for each output channel shall be supplied.Minimum one complete set of electrodes for each output channel shall be supplied.
46Power cord/adapter and battery charger, as applicable.Power cord/adapter and battery charger, as applicable.
47User/operator manual in English.User/operator manual in English.
48Service/maintenance manual or technical documentation, where available.Service/maintenance manual or technical documentation, where available.
49Any special cables, connectors or accessories required for safe and complete operation shall be supplied.Any special cables, connectors or accessories required for safe and complete operation shall be supplied.

AI Tender Summary

OUR REF NO 57382227
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 28-09-2026
Authority
Authority Name Tata Memorial Centre
Work Description Bids Are invited for Tens (Transcutaneous Electrical Nerve Stimulator) - Four-Channel Tens System With Four Independently Controllable Output Channels. , Suitable For Clinical/Hospital Physiotherapy Use And Capable Of Continuous Operation For Routine Patient Treatments. , Microprocessor-Controlled Operation With User-Selectable Treatment Parameters. , Portable, Compact And Lightweight Construction With Clearly Labelled Controls. , Independent Intensity/Current Control And Parameter Display For Each Channel. , Treatment Settings Shall Be Adjustable By The Operator And Shall Include Provision For Saving/Recalling Commonly Used Programs Or User Memories. , Minimum 20 User-Programmable/User-Memory Settings Preferred. , Output Mode: Constant-Current Or Otherwise Regulated Patient-Safe Output Suitable For Tens Therapy. , Provision For Conventional/Continuous Stimulation And Burst/Modulated Stimulation Modes. , At Least 4 Output Channels, With Independent Control Of Stimulation Intensity For Each Channel. , Output Shall Incorporate Appropriate Patient Safety Controls To Prevent Unintended Excessive Stimulation. , Output Shall Automatically Return To A Safe/Zero Level When A Channel Is Activated Or A Treatment Is Restarted, As Applicable , Treatment Timer: Adjustable, Preferably From 0–60 Minutes Or Wider. , Pulse Frequency: Adjustable Over A Clinically Useful Range, Preferably Approximately 2–250 Hz Or Wider. , Pulse Width/Duration: Adjustable Over A Clinically Useful Range, Preferably Approximately 20–250 Microseconds Or Wider. , Provision For Burst Frequency/Rate Or Burst Mode, Where Applicable. , Provision For Intensity Adjustment Independently For Each Channel. , Parameters Shall Be Displayed Clearly And Shall Remain Stable During The Treatment Cycle Unless Intentionally Modified By The Operator. , Minimum 15 Pre-Programmed Pain-Relief/Analgesic Or Tens Treatment Programmes. , Minimum 5 Additional Programmes Suitable For Fitness/Conditioning Or Physiotherapy Applications, Or Equivalent User-Selectable Programmes. , Programmes Shall Be Selectable Through A User-Friendly Keypad/Touch Keys Or Equivalent Interface. , Manual Mode Shall Be Available For Setting Treatment Parameters According To Clinical Requirement. , Lcd Or Equivalent Digital Display For Treatment Parameters, Programme Selection, Timer And Channel/Intensity Status. , Display Shall Be Clearly Visible And Legible During Normal Clinical Use. , Soft-Touch Membrane Keys, Push Keys, Rotary Controls Or Equivalent Durable Controls May Be Provided. , Visual Indication Of Active Output Channels And Treatment Status. , Audio/Visual Indication Of Completion, Error, Electrode Disconnection Or Other Relevant Safety Conditions, Where Applicable. , Equipment Shall Operate From Standard Indian Hospital Mains Supply, 230 V Ac, 50 Hz, Or Through An Integral/Adaptor Power Supply Compatible With 100–240 V Ac, 50/60 Hz. , Built-In Rechargeable Battery Shall Be Provided For Portable Operation. , Battery Backup Shall Be Minimum 5 Hours Under Typical Operating Conditions Or Equivalent Clinically Adequate Backup , Battery Charging Status Indication Shall Be Provided. , Battery Shall Be Replaceable/Serviceable By The Manufacturer Or Authorised Service Personnel. , Quoted Model Should Comply With Applicable Requirements Of Iec 60601-1, Ce/Us Fda, Iso 13485 And Iso 10993 Approved Certificates. , Applied Part Shall Be Suitable For Patient Use And Shall Have Appropriate Protection Against Electric Shock. , Equipment Shall Have Appropriate Protection Against Over-Current, Output Fault And Electrode Disconnection. , Leakage Current And Patient Auxiliary Current Shall Comply With The Applicable Medical Electrical Equipment Standards. , Equipment Shall Be Supplied With Appropriate Electrical Safety Classification As Per The Applicable Standard. , Manufacturer Shall Provide Valid Test/Certification Documents Demonstrating Conformity To Applicable Regulatory And Safety Requirements. , Compact, Robust And Easy-To-Clean Enclosure Suitable For Hospital/Physiotherapy Department Use. , Dimensions And Weight Shall Be Suitable For Tabletop/Portable Operation; Preferably Not More Than Approximately 2 Kg Excluding Accessories. , Materials Shall Be Durable, Corrosion-Resistant And Suitable For Routine Cleaning With Hospital-Approved Disinfectants. , No Sharp Edges Or Exposed Conductive Parts Shall Be Accessible To The Operator/Patient During Normal Use. , Complete Set Of Patient Connecting/Output Leads For All Channels. , Patient Electrodes: Reusable And/Or Compatible Disposable Electrode Sets, As Applicable. , Minimum One Complete Set Of Electrodes For Each Output Channel Shall Be Supplied. , Power Cord/Adapter And Battery Charger, As Applicable. , User/Operator Manual In English. , Service/Maintenance Manual Or Technical Documentation, Where Available. , Any Special Cables, Connectors Or Accessories Required For Safe And Complete Operation Shall Be Supplied.
Basic Detail
Tender No GEM/2026/B/7998356
Bidding Type Tender
Location
City Muzaffarpur
State Bihar
Key Dates
Publish Date 07 Sep 2026
Submission Date 28 Sep 2026
Open Date 29 Sep 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Available
Document List
ad3223a3-823c-4e86-b27e-d3405bac8d66.pdf
tens_technical_specification_-1_2026-09-04-17-58-34_29accda87de6cd048ae1811bb6983d91.xlsx

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Sep 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 18 days
Sep 29, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 19 days

Tender Documents

Download All (ZIP) ↓
pdf

ad3223a3-823c-4e86-b27e-d3405bac8d66.pdf

xlsx

tens_technical_specification_-1_2026-09-04-17-58-34_29accda87de6cd048ae1811bb6983d91.xlsx

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders