Tender For Special Repairs To Or Toilets (Sunken Floor) And Roof Treatment Of Bldg No-P-170 (Otm) Against (Job No.81 Sa/Btd/Sr (Bldg)-33/2025-26 Under Ge North At Bathinda Mil Stn
Tender Value
68.50 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
27 days left
EMD
1.28 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Or Toilets (Sunken Floor) And Roof Treatment Of Bldg No-P-170 (Otm) Against (Job No.81 Sa/Btd/Sr (Bldg)-33/2025-26 Under Ge North At Bathinda Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each each as doors, windows and ventilators and removal from site complete all as specified and directed. |
| 3 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length complete as per direction of Engineer-in-Charge.(M.S. Hold fast/Lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door /window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 4 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat of Size 65mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 1000 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and including taking down existing door frame and making good with plastering/rendering etc. around the finished opening of the disturbed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge. |
| 5 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid flush door shutter of 30 mm thick , size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 750 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt, Supply & Fixing of 02 Nos (per door) SS 300mm long Sliding Bolt with and including Supply & Fixing of 02 Nos (per Leaf) Stainless Steel 150mm long handle with and including taking down of existing shutter complete all specified and directed by Engineer -in-charge. |
| 6 | Supply & Fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 750 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos stainless steel handles, 125 mm long, (ISI marked) conforming to IS 208-2020 , 01 No. of helical door spring of 300 mm length complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainless steel handles, 125 mm long, (ISI marked) , 01 no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item. 3. The rate of taking down of existing shutter complete all specified and directed by Engineer-in-charge is included in this item and nothing shall be paid extra on this account. 4 .The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. |
| 7 | Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge .Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site.(ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly.(iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill . |
| 8 | Supply and fixing 100 mm long Stainless Steel Butt Hinges, cast brass, with mild steel hinge pin, bright polished and fixed, Ditto, but t ype C-21 complete all as specified and as directed by Engineer-in- charge. |
| 9 | Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge. |
| 10 | Supply and Fixing type 3 stainless steel door handle of size 100 mm conforming to IS 208-2020, fixed with countersunk conforming to IS 208-2020 complete all as specified and as directed by Engineer-in-charge. |
| 11 | Supply & Fixing stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks to galvanised wire staple complete all as specified and as directed by Engineer-in-charge. |
| 12 | Supply & fixing for 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in- charge. |
| 13 | Supply & fixing 4.0 mm thick Figured glass pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed |
| 14 | Demolition of lime concrete in ground floor, first floor, sunken portion and paving at any thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 15 | Supply only Integral water proofing compound all as specified and directed by Engineer-in-Charge |
| 16 | Material and Lablour for Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :-(a) Material and Labour for rendering 10 mm thick in cement mortar 1:3 using coarse sand as approved by GE mixed with integral water proofing compound as per manufacturer's instruction trowel even and smooth with steel trowel on sunken surfaces.(b)Material and Lablour for applying first coat of chemical pidifin 2K on cleared RCC surfaces @ 0.86 Kg/Sqm (minimum) as recommened by manufacturer.(c) Material and Lablour for provide a layer glass fiber mesh of size 2.25mm x 2.25mm (45 GSM) over first coat of chemical pidifin 2K as per manufacturers recommendations.(d) Material and Lablour for applying second coat of chemical Pidifin 2K @ 0.86 Kg/Sqm (minimum) over layer glass fiber mesh of size 2.25mm x 2.25mm (45 GSM) as recommened by manufacturer.Note : 1.integral water proofing compound shall be measured and paid separately as supply only and labour component is included in this item and nothing shall be paid extra on this account. 2. Water testing shall be carried out for minimum 72 hours after complition of treatment . The rate of this aspect is included in this item and nothing shall be paid extra on this account. |
| 17 | Material and labour 30 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in floors, sunken floor etc, and finished rough to receive tiles, including mixing of liquid WPC in mortar as per manufacturer instruction, complete all as specified and as directed by the Engineer-in-charge.(Note :- Liquid WPC shall be measured & paid separately as Supply Only) |
| 18 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge. |
| 19 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 20 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed by Engineer-in-charge. |
| 21 | Material & Labour for anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors and skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing ) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Material and labour for Glazed ceramic coloured tiles of size 300mm x 450mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 9-10mm thick (square), polished, shade and colour as approved by GE, in floors with and including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scale and abrasion resistance of class V completed all as specified and directed by Engineer-in-charge. |
| 24 | Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 9-10mm thick (square), polished, shade and colour as approved by GE, in vertical surfaces as in skirting/ Dado with and including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scale and abrasion resistance of class V completed all as specified and directed by Engineer-in-charge. |
| 25 | Material and labour for machine cut kota stone slab flooring 20-25 mm thick laid over with and including 15mm thick cement screed base in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and Labour for 20-25 mm thick machine cut Kota stone slab as approved by GE in riser of steps, stairs, skirting,dado etc. over with and including rendering 20 mm hick in cement mortar 1:6, laid and jointed with grey cement slurry @ 3.00 Kg/ Sqm mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed by Engineer-in- charge. |
| 27 | Supply and Fixing PVC connection 15mm dia and 60cm long with PTMT nuts of approved quality complete all as specified and directed |
| 28 | Supply and fixing in replacement Angular Stop Cock with wall flange, chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified & directed by Engineer-in-charge. |
| 29 | Supply & fixing in replacement Brass chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply & fixing in replacement, stop valve cast copper alloy, chromium plated, fancy type, long shank and and cup (concealed type) , screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 31 | Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply & fixing in replacement Stainless Steel Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge |
| 33 | Supply and fixing in replacement 15mm bore bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-charge. |
| 34 | Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including PVC frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and fixing 1200mm x 600mm size bevelled edge mirror selected quality 6mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 36 | Supply and fixing in replacement 19mm internal dia Stainless Steel drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window complete all as specified and directed by Engr-in-Charge |
| 37 | Supply and fixing or laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting on walls/Ceiling or laying in floors including taking down of old GI pipe complete all as specified. complete all as specified and directed by Engr-in-Charge |
| 38 | Supply and fixing or laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting on walls/Ceiling or laying in floors including taking down of old GI pipe complete all as specified. complete all as specified and directed by Engr-in-Charge |
| 39 | Supply and fixing or laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fitting on walls/Ceiling or laying in floors including taking down of old GI pipe complete all as specified. complete all as specified and directed by Engr-in-Charge |
| 40 | Material and Labour in repairs Oval type vitreous china wash basin 550mm x 400mm, white, including 32mm chromium plated waste coupling and PVC waste pipe &fixing in granite slab complete all as specified and directed by Engr-in-ChargeNote : Granite shallbe measured and paid separately under appropriate item of Schedule 'A' BOQ. |
| 41 | Supply & Fixing wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & including PVC P Trap complete all as specified and as directed by Engineer-in-charge . |
| 42 | Supply & fixing in repairs vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe including CP urinal spreader and CP connection and waste pipe complete all as specified and Engineer-in-Charge. |
| 43 | Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50mm x 5mm and 16mm dia round iron stay (at the interval of 1.00mtr ) including nut bolt and PCC work, complete all as specified and as directed by Engineer-in- charge. |
| 44 | Supply and Fixing 110mm bore,PVC SWR Type-B, bends , junction , TEE and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete complete all as specified and as directed by Engineer-in-charge. |
| 45 | Supply & fixing in repair Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 47 | Supply only PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and as directed by Engineer-in-charge . |
| 48 | Supply & fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge. |
| 49 | Supply and Fixing 110 mm dia neck PVC SWR Type-B, P trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete all as specified and as directed by Engineer-in-charge. |
| 50 | Supply and Fixing 75 mm dia neck PVC SWR Type-B, P trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1, using 20mm graded stone aggregates complete all as specified and as directed by Engineer-in-charge. |
| 51 | Supply & Fixing Branch pieces, PVC SWR Type B single 110 mm bore, equal or unqual, (Y, T, etc) complete all as specified and as directed by Engineer-in-charge. |
| 52 | Dismantling brick tiles / PCC terracing tiles single layer laid on roof and pointed with cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 53 | Demolition of mud from roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding / parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 54 | Material and Labour for Water proofing tratment to roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE. |
| 55 | Material and Labour for PCC padding to maintain roof Slope and benching with PCC (1:2:4) Type B-0 (using 12.5 mm graded stone aggregates) using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note: Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 56 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed by Engineer-in-charge. |
| 57 | Material and labour for rendering/plastering 5mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 58 | Material and labour for rendering/plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 59 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description complete all as specified and as directed by Engineer-in-charge. |
| 61 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 62 | Material and Labour for 75 mm thick PCC 1:3:6 , Type C-2 using 40 mm graded stone aggregate as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 63 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 64 | Material and labour for RCC (1:2:4) type B1 using 20mm aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Material and labour for Formwork to chullah hoods, chajjas, troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge. |
| 66 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 67 | Supply and fixing in replacement three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessary hanging arrangement of ovr flow pipe upto outside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item of Schedule 'A' BoQ. |
| 68 | Supply and Fixing in repair Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge. |
| 69 | Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of white wash with (paint brush /with roller ) complete all as specified & directed by Engineer-in- charge |
| 70 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean including applying 2mm thick wall care putty to make the surface smooth and glossy upto the entire satisfaction of Engineer -in-Charge and after reparing the surface smooth applying two coat of white wash with paint brush/roller only complete all as specified and as directed by Engineer-in-Charge. |
| 71 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge. |
| 72 | Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge.Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint. |
| 73 | Material and labour for preparation of new plastered/ concrete surface of wall / Pillars / cornices and applying 1.5mm thick one coat of cement based wall care putty to complete surface of wall to make the surface even and smooth by using sander machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and applying two coats of interior oil emulsion paint (with roller brush ) complete all as specified and as directed by Engineer-in-Charge |
| 74 | Material and labour for preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed |
| 75 | Material and labour for preparation of newly plastered / concrete surface of wall / Pillars / cornices to make the surface even and smooth by using sander Machine (with provision of dust sucking) upto entire satisfication of Engineer-in-Charge and applying two coats of coats of exterior emulsion paint (light shade), as approved tint/colour by using paint roller brush complete all as specified and directed by Engr-in-Charge |
| 76 | Material and labour for preparation and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade @ 5 Sqm / per litre for two coats by using roller to external walls / RCC surfaces/soffits of chajjas / roof projections /cantilevers/ balcony etc surfaces over & including a coat of exterior wall primer @ 11 Sqm / per litre for one coat over acrylic thick wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and as directed by Engineer-in- charge. |
| 77 | Supply & Fixing 4mm GI Wire for laying mosquito nets in ORs line, fixing with angle and provide necessary arrangement for tightening of GI wire complete all as specified and directed by Engr-in-charge. |
| 78 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 79 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 80 | Demolition of cement concrete (unreinforced) in ground floor and above ground floors and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 81 | Material & Labour 75mm Cement concrete 1:4:8 type , D 2, using 40mm graded stone aggregates as in sub base complete all as specified and directed by Engr-in-Charge |
| 82 | Supply and fixing 60 mm thick (M35 grade) precast interlocking tiles/paving block factory casted (made by using PVC paver mould / Rubber paver moulds on vibrating Table Machine) using grey cement and no pigment, shape haxagon / trigular / zigzag / I-shaped etc, as directed, prepolished & preglazed, specification as per relevent IS, having compressive strength not less than 350 Kg/ Sqcm, laid over sand upto required thick layer and filling the interstics etc including 40mm thick sand cushioning complete all as specified and as directed by the Engineer-in-Charge |
| 83 | Supply & fixing in replacement Swan Neck Pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge. |
| 84 | Supply & fixing in replacement Chromium Plated Grating Doom 125mm dia with/without waste hole (min weight 40gms) complete all as specified and directed |
| 85 | Excavation in trenches in soft / loose soil not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge . |
| 86 | Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe set in cement mortar up to and including 150 mm bore pipes all as specified and directed by Engineer-in-Charge. |
| 87 | Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of SGSW drain pipes of 150 mm bore, laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-charge. Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be outer diameter of drain pipes (not of sockets / collar) plus 30cm. |
| 88 | Material and labour for High Density Polythene Double wall Corrugated (HDPC) PVC pipe 150mm dia in SN4 stiffness class laid in trenches complete all as specified and as directed by Engineer-in-charge |
| 89 | Material and labour for PCC 1:3:6 , Type C-2 using 40 mm graded stone aggregate for foundations, fillings & mass concrete, sub base, plinth protection, complete all as specified and asdirected by Engineer-in-Charge. |
| 90 | Material & labour for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for manhole benching, flooring and coping, complete all as specified and as directed by Engineer-in-Charge |
| 91 | Supply and Fixing SFRC (Steel fibre Reinforcement concrete cover & frame) heavy duty HD-20, grade designation 650 mm internal diameter conforming to IS-12592, graded rectangular clear opening 700mm x 700mm, total weight of cover and frame to be not less than 182 Kg fixed in cement concrete (1:2:4) etc complete all as specified and as directed by Engineer-in- charge. |
| 92 | Returning and filling including spreading, leveling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed by Engineer-in-charge. |
| 93 | Removal of excavated material to distance not exceeding 1.5 metre above the starting point, complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Material and Labour for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for Internal dia of pipe in 150 mm complete all as specified and as directed by Engineer-in-charge. |
| 95 | Material and labour for replacement of tubing GI \\"Medium Grade\\" with all fitting laid in floor or trenches including taking out old unserviceable pipe of size 15 mm dia complete all as specified and directed by Engineer-in-Charge |
| 96 | Supply & fixing PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-charge. |
| 97 | Taking down carefully copper /aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no. 99.00, 100.00, 101.00, 102.00 & 103.00 of BoQ. |
| 98 | Material and labour sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to matched and finised with existing surface are included in the ratecomplete all as specified and directed.Note:-(i) 2 run of 6.0 Sqmm main cable, one run of 6.0 Sqmm earth wire and one run length of PVC conduit of size 25mm shall be considered as one running length.(ii) The wiring shall be done in proper color coding using Red, Yellow, Blue for phases, Black for neutral and Green for earth. |
| 99 | Material and Labour Point wiring for one light / fan / 5 Amp independent socket point/ call bell point controlled by one 5 Amp Switch with using approved colour coding as per IS (Red, Black and Green for single phase circuits), with 1.5 Sqmm nominal cross sectional area single core PVC insulated, unsheathed 'multi stranded' FRLSH copper cable, 1100 volts grade, drawn through existing PVC conduit on wall / ceiling surface with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper cable as continuous earth continuity conductor (green in colour) terminated in Cast Iron Pressed steel terminal boxes including 3.00 mm hylam sheet and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge. .Note for serial item no.item no. 100.00, 101.00 , 102.00,103.00, 104.00, 105.00 & 106.00 :(i) switches , sockets 5 /6 Amp , Bell push, regulator , switches and socketes out let 15 / 16 Amps shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. |
| 100 | All as per item No 99.00 here-in-befor but for socket outlet multistranded 5 pin 5 amp on same borad , complete all as specified and directed by Engineer-in-charge. |
| 101 | All as per item No 99.00 here-in-before but for socket outlet multistranded 5 pin 5 amp on Independent borad , complete all as specified and directed by Engineer-in-charge. |
| 102 | All as per item No 99.00 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable PVC insulated FRLSH and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm ida and unsteathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLSH PVC insulated in green colour including with new CI/pressed steel sunken black with hylum top sheet cover 3mm thick complete all as specified and directed by Engineer-in-charge. |
| 103 | Supply and fixing in replacement Socket outlet 3/5 Pin, 5 Amp, flush type complete all as specified and directed by Engineer-in-charge. |
| 104 | Supply and Fixing in replacement for switch piano flush type 5 Amp, ISI marked 240V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge |
| 105 | Supply & fixing switch piano flush button single pole one way 15 Amp complete all as specified and as directed by Engineer-in- charge |
| 106 | Supply & fixing socket outlet 6 pin 15 Amp 240 volt multi purpose flush type complete all as specified and as directed by Engineer-in- charge |
| 107 | Supply and fixing in replacement factory made DB (made out of CRCA sheet not less than 1.2mm thick) SPN, 8 Way 240V, double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-43 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge.Note: MCB & MCCB shall be measured and paid seperately in respective items of Schedule'A' BoQ. |
| 108 | Supply & fixing ceiling rose surface type PVC polycarbonate isolated body two to three terminal , tp line series 20x50mm, 6 amps three terminal complete all as specified and as directed by Engineer-in- charge. |
| 109 | Supply and fixing in replacement new generation energy saving ,wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED duly fitted on pvc square block 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz., including electric connection connecting with using flexible coopper wire twin core from ceiling rose to connector complete all as specified and directed by Engineer-in-charge. complete all as per manufacturer's instructions and as directed by Engr-in-charge. |
| 110 | Supply & fixing in MCB single pole 40-63 Amp suitable for 240 volt, 10 KA complete complete all as specified and as directed directed by Engineer-in- charge. |
| 111 | Supply & fixing in MCB single pole 5-32 Amp suitable for 240 volt, 10 KA complete complete all as specified and as directed directed by Engineer-in- charge. |
| 112 | Supply and Fixing of MCCB 1000 Amp , 4 Pole , 25 KA thermal megnatic type complete all as specified and directed |
| 113 | Supply and fixing of vertical TPN 4 way double door suitable for and inclduing MCCB 125 Amp 25 KA four pole as incomer and out going MCBs and should be IP 54 protected with copper BusBars, Neutral Links, Earthing bar all as specified and directed including taking down old Unserviceable DB/MCB any complete all as specified and directed by Engineer-in-charge |
| 114 | Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia light grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge. |
| 115 | Supply and fixing LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection , including electric connection connecting with using flexible coopper wire twin core from ceiling rose to connector complete all as specified and directed by Engineer-in-charge.complete all as per manufacturer's instructions and as directed by Engr-in-charge. |
| 116 | Supply and Fixing in replacement exhaust fan, metallic body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and making suitable hole on wall for fixing of fan and making good as per existing surfaces , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed.complete all as specified and directed by Engineer-in- Charge. |
| 117 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, and taking down old unserviceable electric water heater and carefully deposited to MES store yard complete all as specified and directed by Engineer-in-charge. |
| 118 | Supply & fixing of 2 Nos rawl plug of suitable size (4\\" -6\\") Nuts & Bolts, grouting work in RCC/Brick Wall, cemented works labour charges for cutting to existing GI Pipe line of Size 15mm dia in position for Insertion of Tee or Branch connection Jointing complete with necessary GI Fittings, Plumbing all as per site requirement. complete all as specified and as directed directed by Engineer-in- charge. |
| 119 | Supply and fixing (Concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysOct 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender