Tender For Removal Of Defects And Remaining Work At 50 Bedded Residential Building ,Bair Ur Subansa, Distt-Pratapgarh.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pratapgarh → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Removal Of Defects And Remaining Work At 50 Bedded Residential Building ,Bair Ur Subansa, Distt-Pratapgarh.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | 15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4coarse sand) |
| 3 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 4 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm) |
| 5 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 6 | Class 150 brick work in in 1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. Second Floor |
| 7 | Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal sizelaid in onelayer neat cement (25 mm thick floor). |
| 8 | Providing and laying \\"brick coba\\" 12mm thick laid with M.150 class brick bat coba7.50cm. Thick with gap of 15mm to each other.over 20mm. Thick base of cement morter 1:4cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filed gaps of coba & top of cobamortar mixed with water proofing compoond.in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmX30cm.& side wall parapet shall be mono tythicplaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T & P etc. com.for proper completion of work. |
| 9 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.a) 160mm diameter |
| 10 | Providing & fixing Stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm . |
| 11 | Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm |
| 12 | Providing and fixing stainless steel handles with screws etc. complete (a) 150 mm |
| 13 | Painting two coat over priming coat on steel and other metal steel/wooden surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. |
| 14 | M.S. or Iron work in heavy size such as trusses build up gate , door frame , record racks, roof work gate etc wrought to required from including supply of steel and its wastage including cost of bolt, nuts if requried for and welding etcrequired for proper completion of the work. |
| 15 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 25x5ms flat with screws and nut bolt. |
| 16 | Cement concrete with 4cm gauge approved stone ballast, approved coarse sand and cement in the propotion of 1:4:8 including supply of all materials labour and tools and plants etc requred for proper completion of the work. |
| 17 | M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 18 | R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 infoundation excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire |
| 19 | P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 20 | Earth work in filling in open area in 20 cm layers including watering , ramming and dressing the surface complete. Cartage of earth beyond 8km distance from work site. |
| 21 | M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work. grill and Z-Section steel windows (openable) |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood commercial 3 ply veneering with vertical grin or crossbands and face quality. 35 mm thick including hings and screws |
| 23 | Supply and fixing of 240 volts 'L' series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required. |
| 24 | Providing and fixing gun metal gate valve with wheel of approved quality.25 mm dia |
| 25 | Providing and fixing brass stop cock of approved quality. 20 mm dia |
| 26 | Providing and fixing CPVC pipes complete with fittings and clamps, including cutting and making good walls etc. 20mm dia |
| 27 | 25 mm dia |
| 28 | Providing and fixing C.I. Sluice valves complete with bolts ,nuts, rubber,insertions.100 mm dia |
| 29 | Providing and fixing of flot valve in pvc water tank complete in all respect. 25 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender