Tender For Repair/ Maintenance Of Ro/Dm Plants, Filteration Plants, Sand Filters & Media At Various Location Under 27 Wg And 308 Tru At Af Stn Bhuj
Tender Value
25 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
9 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Ro/Dm Plants, Filteration Plants, Sand Filters & Media At Various Location Under 27 Wg And 308 Tru At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | M & L for complete servicing and rectification of leakage in RO plant of any capacity and any location replacing of unservicable pipe and fittings of appropriate size and make them servicable all as specified and directed by Engr-in-Charge.Note:- Spare parts and other items required to make them servicable will be measured and paid in respective schedule item of BOQ. |
| 2 | M & L for removing carefully existing housing with Membrane module 8\\" from the RO Plant and replace with new one Membrane housing of existing size and dia with complete fittings all as per directed by Engr-in-charge. |
| 3 | S & F in replacement membrane module 8\\" for RO plant of Make Model No TMT 20D-400 or Toray (Existing make) or equivalent as approved by GE complete all as specified and directed by Engr-in-charge. |
| 4 | S & F in replacement membrane module 4\\" for RO plant as approved by GE complete all as specified and directed by Engr-in-charge.Make: Model No 4040 of Toray (Existing Make) or equivalent. |
| 5 | S & F in replacement manual multiport valve side mounted/Top mounted 50mm dia for RO Plant fixing all as per manufacturers instructions and as directed by Engineer in charge. |
| 6 | S & F in replacement manual multiport valve side mounted/Top mounted 40mm dia for RO Plant fixing all as per manufacturers instructions and as directed by Engineer in charge. |
| 7 | S & F in replacement manual multiport valve side mounted/Top mounted 25 mm dia for RO Plant fixing all as per manufacturers instructions and as directed by Engineer in charge. |
| 8 | Supply & Fix in replacement water flow meter (rotameter) suitable for RO plant of capacity (4000/2000/1200/60) LPH as per existing size and model complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for cleaning of RO plant (4000/2000/1200/600 Ltr/Hr) Membrane with citric acid and after cleaning with citric acid, testing of water flow rate and water pressure, proper backwash, replacement of catridge filter and paper filter, reassembling the RO membrane in its orignal position all as specified and directed by EIC. Note - Supply only catridge filters shall be measured and paid separately under respective item) |
| 10 | Supply only Cartridge filter suitable for RO of capacity( 4000/2000/1200/600 Ltr/Hr) plant all as specified and directed by Engr-in-charge. |
| 11 | Supply and fix in replacement of RO plant cartridge filter housing suitable for (4000/2000/1200/600 Ltr/Hr) high quality virgin polypropylene as per existing size complete all as specified and directed by Engr-in-charge. |
| 12 | Supply and fix in replacement of RO plant SS coupling for in/out connection of 8 /4 inch RO membrane including water tight seal as per existing size complete all as specified and directed by Engr-in-charge. |
| 13 | Supply and fix in replacement of RO plant 8/4 inch membrane end conenctor as per existing size complete all as specified and directed by Engr-in-charge. |
| 14 | Supply and fix in replacement of RO FRP vessel distribution system suitable for 600 to 4000 LPH capacity plant complete all as specified and directed by Engr-in-charge. |
| 15 | Supply and fix in replacement of RO FRP vessel PVC air release valve suitable for 600 to 4000 LPH capacity plant complete all as specified and directed by Engr-in-charge. |
| 16 | Supply and filling Pabbels and Gravels, Fine Sand for FRP vessel in lot of 25/50 Kg bags premixed for filling into vessel FRP/PGV vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-in-charge |
| 17 | Supply and filling Activated Granular Carbon (Charcoal 900 IV) for 21X62 FRP vessel in lot of 25 KG bags for filling into vessel including draiing out the existing used Charcoal from FRP vessel and cleaning the around area and repacking the vessel after filling in new items complete by means of packing and fixing material including labour and testing for appropriate pressure including taking down old unserviceable complete all as specified and directed by Engr-in-charge |
| 18 | S&F in replacement Unplasticised PVC pipes Sch-80 heavy duty, complying to ASTM - 1785 with all fittings and fixtures complete for sizes 20 mm bore all as specified and directed by Engineer-in-charge. |
| 19 | S&F in replacement Unplasticised PVC pipes Sch-80 heavy duty, complying to ASTM - 1785 with all fittings and fixtures complete for sizes 25 mm bore all as specified and directed by Engineer-in-charge. |
| 20 | S&F in replacement Unplasticised PVC pipes Sch-80 heavy duty, complying to ASTM - 1785 with all fittings and fixtures complete for sizes 40 mm bore all as specified and directed by Engineer-in-charge. |
| 21 | S&F in replacement Unplasticised PVC pipes Sch-80 heavy duty, complying to ASTM - 1785 with all fittings and fixtures complete for sizes 50 mm bore all as specified and directed by Engineer-in-charge. |
| 22 | M & L for Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity 5000 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks all as specified and directed by Engr-in-Charge. |
| 23 | M & L for Cleaning & removing all scale and dirt etc from PVC water tank and from mouths of circulating pipes etc of capacity 10000 ltrs including disconnecting and refixing all parts required to be disconnected for cleaning of the tanks all as specified and directed by Engr-in-Charge.. |
| 24 | Taking down defective existing MS framed supports for RO/Filteration plant of any size and Supply, fabrication and fixing of mild steel frame/staging / height for placing of E/M equipments of RO plant made out of mild steel angle iron /rod etc. including nut, bolts etc. including welding ,bending cold , or hot in any shape or size as indicated or directed and inclusive of one red oxide primer coat ,one under coat and one finishing coat of synthetic enammel paint complete all as specified and directed. |
| 25 | Opening of filteration plant filter vessel of Swimmimg Pool having capacity 125 CUM/ Hr installed at including taking out carefully filter media completely of different sizes,cleaning the filter walls, pipes and other accessories with wire brush & bleaching powder and cleaning throughly with clean water and applying of two coats of enamel paint on inside walls of sand filter vessel, replace the filter media carefully, assemble complete unit and testing complete all as directed.Note : Supply only filter media i.e. pebbles and filter sand will be measured and paid separately under respective item. |
| 26 | Supply only multi grade gravel and sand for Pressure type sand filter (for SNo. 25 above) comprising of sizes as under :-(i) Silex Big-1200 Kgs(ii) Silex small -1200 Kgs(iii) Pabbles Big-1200 Kgs(iv) Pabbles small-1200 Kgs(v) Sand-1200 Kgs(vi) Garnet -1400 KgsNote : The qty of pebbles & sand mentioned above are appx qtys and the same may vary as per site condition. No claim shall be entertained on account of variation in Qty of above items. |
| 27 | Supply and fix 5.5 HP MVC-4E/22 TR 2 CRI multistage vertical inline pump and motor set complete with TEFC squirrel cage induction motor, 415 volt, 3 phase, 50 HZ IE 3 efficiency, IP 55 Protection, class F insulation, SS304/SS316 wetted parts for RO plant capacity 2000/4000 Ltr per hour MS fabricated with anti vibration Pads to provide sufficent pressure for opearting existing RO plant equipments. |
| 28 | Disconnecting & dismantling of all asscessories connected to filteration plant Vessel of Swimming pool having filteration capacity 125 CUM/Hr and refixing the new components in place of unserviceable alonwith serviceable components to its original position complete testing the plant up to its full functioning as below:-(a) Dismantling of all solenoid butter fly valve pilot operated suitable for pneumatic actuator alongwith its accessoriies like solenoid coil, DIN connector,interferance kit,air tubing, manual over ride, limit switch box, pressure gauge (06 Nos 150 mm and 01 No 50mm size) checking the serviceabilty of valve,and refixing the new and serviceable valve to its original position complete testing.(b) All presurre gauge checking the serviceabilty of gauge,and refixing the new and serviceable gauges to its original position complete testing.(c) Disconnecting and dismantling the all MS pipe 150 mm Dia up to length of 20 Meter and 50 mm dia up to a legth of 10 Mtr and making connection in new MS pipe for conneting butterfly valves, pressure gauge,chlorination unit etc complete with testing (d) Disconnection and dismantling of AIR Pressure Blower unit and reconnection of the same after servicing and testing complete. (e) Disconnection and dismantling of chlorination dosing unit and making connection of new/serviceablde chlorination dosing unit complete testing. Note:- (a) Cost of MS pipes, Solenoid Valve, butterfly valves,pressure gauges are not included in this item and will be paid under appropriate item of schedule.(b) Cost of minor parts like nut bolts, cutting, welding,air pressure line connection, wiring connectiion, sensor connection etc to make plant function is included in this item (c) Cost of repairing and servicing of air blower is not included in this item. |
| 29 | Supplying, fixing and Testing in repair Solenoid Valve150 mm, 5/2 way alongwith solenoid coil ( suitable for operation at 24 V AC,24 V DC or 230 V AC), DIN electrical Connector, controller, pneumatic actuator, FRL unit, Ait tubing and Fittings, Manual over ride, limit switch box complete all as specified and as directed by Engg-in-charge. |
| 30 | Supplying, fixing and Testing in repair Solenoid Valve50 mm, 5/2 way alongwith solenoid coil ( suitable for operation at 24 V AC,24 V DC or 230 V AC, DC 250V 0.2 A, 125 V 0.4 A, 30V 4 A, 15 V 5A, 8V 5A AC 250V 3A, 125V 5A), DIN electrical Connector, controller, pneumatic actuator, FRL unit, Ait tubing and Fittings, Manual over ride, limit switch box complete all as specified and as directed by Engg-in-charge. |
| 31 | Supply, installation, testing and commissioning of Automatic electronic Membrane Dosing Pumps for chlorination , PH correction complete with chemical storage tank, Agitators and with following specifications:- (i) Dosing pumps:- Design, supply, installation, testing and commissioning automatic sensor based dosing pump sets including LCD screen on/off or proportional operation mode 0-14PH 1000-1400 MV, PH, RX (ORP) electrode inlet (10 tera OHM), including electrode screen resolution 0.01PH ( + ) 1 mv ph/ Rx 10 litre /hour -5 bar, IP-65 protection anti acid plastic casing, control panel protection weather proof and resisting UV rays, standard power supply 230V AC 50 HZ single phase with sensor. PH sensor kit including PH sensor buffer solution, sensor holder, level sensor including RX sensor, buffer solution, sensor holder, level sensor.(ii) Chemical storage tanks:- Semi transparent polyethylene tank with external scale so that levels can be checked easily capacity of tank 200Lts. (iii) Agitators:- Agitators for easy installation in the tanks, provided with steering grip in Bakelite, rod and propeller arms in PVC, length of stirring rod 900mm. |
| 32 | Supply install test and commisioning of Trolley mounted suction sweeper suitable for swimming pool with self priming electric driven pump set suitable for cleaning swimming pool capacity 2 HP, 3 Phase complete with PVC braided 40mm dia vacuum hose pipe of length minimum 30 Mt, 900 mm size Aluminum / bronze vacuum head, flexible copper cable from Main, PVC floats, wire rope and all connected accessories complete . |
| 33 | Supply and fix in repair 63 mm dia pressure gauge, range 0-14 kgs rating for swimming pool filter vessel as per existing. |
| 34 | Supply, lay and connection in replacement of M S Pipes heavy grade duly painted with enamel paint and one coat of primer, with all fittings laid in floors or fixed to walls and ceilings etc of size 100 mm complete all as specified and directed by Engr-In-Charge. Note: (i) Cost for making flange connection, flange, nut bolts etc is included in this item.(ii) Cost for necessary welding,drilling , machining etc is included in this item. |
| 35 | Supply, lay and connection in replacement of M S Pipes heavy grade duly painted with enamel paint and one coat of primer, with all fittings laid in floors or fixed to walls and ceilings etc of size 150 mm complete all as specified and directed by Engr-In-Charge. Note: (i) Cost for making flange connection, flange, nut bolts etc is included in this item.(ii) Cost for necessary welding,drilling , machining etc is included in this ittem. |
| 36 | Supply & fix in replacement of CI foot valve ISI marked with flanged ends of size 100 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 37 | Supply & fix in replacement of CI butterfly valve ISI marked with flanged ends of size 150 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 38 | Supply & fix in replacement of CI butterfly valve ISI marked with flanged ends of size 100 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 39 | Supply & fix in replacement of CI butterfly valve ISI marked with flanged ends of size 50 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 40 | Supply & fix in replacement of sluice valve ISI marked with flanged ends of size 100 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply and fix in repair Square type open channel sluice SS gate valve 300 mmX 300 mm size. Frame & Gate : MS fabricated /SS-304/SS-316, Sealing: EPDM/Neoprene robber seal on all sides. Spindle: Stainless steel rising spindle. Operation: Manual hand wheel with all complete accessories such as operating stem, stem cover, hand wheel, guide frame, anchor fasteners, extension spindle all as specified and directed by Engg-in-charge. |
| 42 | Supply and fix in repair Square type open channel sluice SS gate valve 250 mmX 250 mm size. Frame & Gate : MS fabricated /SS-304/SS-316, Sealing: EPDM/Neoprene robber seal on all sides. Spindle: Stainless steel rising spindle. Operation: Manual hand wheel with all accessories such as operating stem, stem cover, hand wheel, guide frame, anchor fasteners, extension spindle all as specified and directed by Engg-in-charge. |
| 43 | Supply & fix in replacement of sluice valve ISI marked with flanged ends of size 250 mm PN 1.6 including MS bolts, nuts and washers from UG Sump of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply and fix openwell submersible pump set of capacity not less than 7.5 HP and head not less than 15 Meter, 415 volt, 3 phase, 50 Hz, motor having IE-3 efficiency, insulation class F, IP -68 Protection, SS body Pump, CI/SS construction impeller , having stainless steel shaft complete all as specified and directed by Engg-in-charge. |
| 45 | Supply and laying 100 mm bore HDPE pipe PN 10 conforming to IS 4984/ISO 4427, PE 100 grade pressure pipe with all fittings and fixtures laid in trenches,fixed complete to walls with GI clamps and ceiling or laid in floor complete all as specified and directed by Engineer-in-Charge. |
| 46 | Excavating in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out in soft soil for pipe trenches all as specified and as directed. Note - Trenches shall be excavated for water supply pipe lines all as detailed under MES Schedule Part-I clause 18.42 to 18.42.6) complete all as specified and directed by Engineer-in-Charge |
| 47 | M&L for returning filling in including spreading, levelling, watering and well ramming in layers not exc 25cm. |
| 48 | Removing excavated soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5m above the starting points complete all as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fix DOL starter suiatable for 10 HP, 415 V, 3 phase, 50 Hz submersible pump motor, having starter Enclouser made out od CRCA sheet , dust and vermin proof, wall/ floor mounted , IP-54 Protection . Incoming Protection : 4 Pole MCCB of suitable rating, Switchgear: (a) Heavy duty AC-3 duty contactor for 10 HP Motor (b) Thermal overload realy for motor (c) Single phase preventor (d) Phase sequence protection relay. ON/Off push buttons, Auto manual selector switch, control transformer, RYB phase indicators, Internal wiring overload protection and all necessary accessories complete. |
| 50 | Supply and fixing in repair LED Building Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 51 | Supply and fixing in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender