Tender For Replacement Of Existing Cfl Lights With Led Lights Installed At 120 Men Barrack, Sos Mess And Officers Institute Of Shq Bsf Bhopal.
Tender Value
2.83 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
0 days left
EMD
5674
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Existing Cfl Lights With Led Lights Installed At 120 Men Barrack, Sos Mess And Officers Institute Of Shq Bsf Bhopal.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying, Installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range - 5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K/ 4000°K /5700°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim. |
| 2 | 12-15 W |
| 3 | Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range-5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm). |
| 4 | 18-22 Watt |
| 5 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 6 | 5/6 A switch |
| 7 | 15/16 A switch |
| 8 | 3 pin 5/6 A socket outlet |
| 9 | 6 pin 15/16 A socket outlet |
| 10 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 11 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 12 | 3 Module |
| 13 | Supply, installation, testing and commissioning of 10W surface/Wall mounted LED luminaire with IP20 ingress protection & the luminaire shall be with system efficacy≥100 lm/W. The luminaire is pre-wired with high efficiency electronic driver.The luminaire Housing shall be made of Aluminium Extruded with powder coated in white color. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000Hrs (Complete LM80 test report for LED should be submitted). The LEDs used in luminaire should be ANSI standard Rated LED with CCT of 6500 K and CRI of Minimum 80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V, THD≤20% & PF≥0.95. The LED Driver shall be easily avaiable in India for repair and service. Luminaire shall have minimum surge protection of 2KV and LM79 Test Report from NABL accredited Lab to be submitted to confirm above parameters, including connection with1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 14 | Supply, installation, testing and commissioning of 10W BULK HEAD LED LIGHT resistance of IK08 and ability to withstand harsh environmental conditions with IP65 protection With 120 Lm/W efficacy & 4kV inbuilt surge protection, LM79 Test Report from NABL accredited Lab to be submitted to confirm above parameters, including connection with1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 15 | Providing and fixing 18 W LED PL-L retrofit lamp having 2G11 (4-pin) base, cool daylight 6500 K CCT, minimum 1700 lumens output, system efficacy not less than 95 lm/W, complete with inbuilt electronic driver, suitable for operation on 220–240 V, 50 Hz AC supply, compatible for direct replacement of existing 36 W PL-L fluorescent lamp in the existing luminaire without any modification, with all necessary connections, testing and commissioning, complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender