Tender For Repair Or Maintenance Work And Construction Of Sump In Security Barrack At Nit Rourkela.
Tender Value
21.31 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
42640
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Or Maintenance Work And Construction Of Sump In Security Barrack At Nit Rourkela.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brickwork manually/ by mechanical means including stacking of servicable materials and disposal of unservicable materials with in 50mtr lead as per direction of Engineer in Charge |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer in Charge. Cement concrete 1:3:6 or richer Mix |
| 3 | Dismantling doors windows and clearstorey windows (steel or wood shutter )including chowkaths architrave holdfasts etc. complete and stacking within 50mtr lead\\" as per direction of Engineer in Charge. Of area beyond 3 Sq.M |
| 4 | Dismantling tile work in floors laid in cement mortar including stacking materials within 50mtr lead. For thickness of tile above 10mm and upto 25mm |
| 5 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead as per direction of Engineer in Charge. |
| 6 | Earthwork in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenchs or drains (Exceeding 30Cm in depth 1.5m in width as well as 10 Sq.M on Plan) including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50Mtr. (All kinds of Soil) |
| 7 | Supplying and filling in plinth with river sand under floors including watering ramming consolidating and dressing complete as per direction of Engineer-in-Charge. |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20Cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50M and lift upto 1.5M |
| 9 | Conveyance of Materials such as stone metal refuse,garbage, rubbish etc including labour for loading and unloading. Beyond initial lead all complete as per direction of Engineer-in-Charge. truck load upto2 km |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:4:8 (1 Cement : 4 sand:8 Coarse Aggregate 40mm Down) Complete as per direction of Engineer-in-Charge. |
| 11 | Brick work with Fly ash cement bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1cement: 6 Sand) complete in all respect as per direction of Engineer-in-charge. |
| 12 | Brick work with Flyash cement bricks of class designation 75 in Super structure above plinth levell upto V floor level in all shapes and size in Cement mortar 1:6 (1cement: 6 sand) complete in all respect as per direction of Engineer-in-Charge. |
| 13 | Centering and shuttering including struting propping etc and removal of forms for:Suspended floors roofs landings balconies and access platform |
| 14 | Centering and shuttering including struting propping etc and removal of forms for: walls (Any thickness) including attached pillaster buttresses plinth and string |
| 15 | Providing and placing reinforcement for R.C.C. work including straightining cutting bending placing in position and binding all complete. Upto plinth level and above plinth level. Thermo Mechanically Treated Bars |
| 16 | Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:1½:3 (1 Cement : 1½ sand:3 Coarse Aggregate 20mm Down) complete in all respect as per direction of Engineer in charge Upto plinth level |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:2:4 (1 Cement : 2 sand : 4 Coarse Aggregate 20mm Down) Complete as per direction of Engineer-in-Charge. |
| 18 | Providing and finishing wall surface with 12mm cement plaster of mix 1:4 (1 cement: 6 Sand) |
| 19 | Neat cement Punning |
| 20 | Providing and applying cement slurry coat (minimum two layer ) admixed with acrylic polymer modified (Hydrocrete/ZYCOSIL/FOSROC ) water proofing cum bonding agent as per manufacturer specification with cement slurry 1:2 (1 hydrocrete : 2 cement) followed by a one coat of brush topping surface preparation complete in all respect over RCC surfaces and exposed portion for water proofing complete as per direction of Engineer inCharge. |
| 21 | Supplying and fixing and fittins of uPVC pipes of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge 110mm dia Pipes |
| 22 | Supplying and fixing and fittins of uPVC pipes of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge 78mm dia pipes |
| 23 | Supplying and fixing and fittins of uPVC plain bend of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 110mm dia Pipes |
| 24 | Supplying and fixing and fittins of uPVC plain bend of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 78mm dia pipes |
| 25 | Supplying and fixing and fittins of uPVC door bend with access door of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 110mm dia Pipes |
| 26 | Supplying and fixing and fittins of uPVC door bend with access door of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 78mm dia pipes |
| 27 | Providing and fixing of 18mm thick gang saw cut mirror polished (pre moulded and pre polished ) machine cut for kitchen platform vanity counters window sill facials and similar location of trequired size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 with joints treated with white cement mixed with matching pigment epoxy touch ups including rubbingcuring moulding and polishing to edges to give high gloss finish etc complete at all levels. Grinite of any colour mirror polished and machine cut edge area of slab over 0.5Sq.M |
| 28 | Extra for providinh edge moulding to 18mm thick marble stone counters vanities etc including machine polishing to edge to give high gloss finish etc complete as per direction of Engineer in Charg. Grinite work |
| 29 | Supplying and fixing and fittins of uPVC clamp with cost of screw and fixtures of approved brand(Astral/Finolex/Supreme) 4Kg/Sq.Cm complete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 110mm dia Pipes |
| 30 | Supplying and fixing and fittins of uPVC vent cowl of approved brand (Astral/Finolex/Supreme) 2.5Kg/Sq.Cmcomplete with fittings including cutting and making good the walls etc. as per direction of Engineerin Charge. 110mm dia Pipes |
| 31 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacture of approved make in all colours shade except burgundy, bottole green , black of any size as approved by Engineer-in-Charge. in skirting , risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 sand) and jointing with grey cement slurry @3.3 kg per Sq.M including pointing in white cement mixed with pigment of matching shade complete as per direction of Engineer-in-Charge. |
| 32 | Providing and laying ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours shade except white ivory grey fume red, brown laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc complete. |
| 33 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc. complete as per direction of Engineer-in-Charge. Sizes of Tile 600 x 600 mm |
| 34 | Chequred precast cement concrete tiles 22mm thick in foot path and courtyard jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement : 4 sand) Ordinary cement without any pigment |
| 35 | Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 sand) bedding in laying of floor tiles |
| 36 | Fixing glazed /ceramic /vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 using 5 kg Adhesive per Sq.M of tile area in average of 3mm thick ness |
| 37 | Providing fixing and laying 60mm thick Localy made of CC M30 hydraulic compressed precast inter locking block of I shape or any other approved shape with approved colour , size over 100mm thick layer including excavation and filling upto desired level and spreading fine sand over paved blocks and compacting including cost of material transporting to the site , unloading stacking etc all complete. |
| 38 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete |
| 39 | Providing and finishing wall surface with acrylic wall care putty (water based) of approved make (Birla or Equivalent) and finished smooth and even surface to receive painting including cost of scaffolding staging charges with all cost of materials taxes labour T&P etc complete in all respect as per direction of Engineer-in-Charge. |
| 40 | Applying one coat of cement primer of approved brand and manufacturer on wall surface complete, as per manufacturer's specification. Cement primer |
| 41 | Distempering with 1st quality acrylic distemper (readymade) of approved manufacture and of required shade and colour complete, as per manufacturer's specification. New Work( Two or more coats ) |
| 42 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade complete, as per manufacturer's specification. Two or more coats on new work |
| 43 | Finishing wall with acrylic smooth exterior paint of required shade: New work (two or more coat applied @1.67kg/10 Sq.M) over and including base coats of water proofing cement paint applied @ 2.2 Kg/10 Sq.M |
| 44 | Finishing wall with acrylic smooth exterior paint of required shade: New work (two or more coat applied @1.67kg/10 Sq.M) on existing cement paint |
| 45 | Providing and fixing of M.S grills of required pattern in frames of windows etc. with M.S flats, Square or round bar etc all complete as per direction of Engineer-in-charge. Fixed to steel window by welding |
| 46 | Steel work in built up tubular trusses including cutting , hoisting fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc all complete as per direction of Engineer-in-Charge. Hot finished welded type tubes |
| 47 | Steel work welded in built upsection/ framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required below in grating frames guard bar ladder railings brackets gates and similar works. in grating , frames guard bar railing brackets gates and similar works |
| 48 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing , balcony railing and staircases railing including applying priming coat of approved steel primer. Stainless steel Tube of 302/202 grade |
| 49 | Providing and fixing of Precoated galvanized profile sheets (Size, shape and pitch of corrugation as 5% total thickness (TCT) Zinc coating 120gms as per IS 277 in approved by Engineer-in-Charge.) 0.05mm 240Mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18micron minimum to avoid scratches while transportation and should be supplied in single length upto 12.0mtr or as desired by Engineer inChrg. The sheet shall be fixed using self drilling / self tapping screws of size 5.5x55mm ) with EPDM seal or with polymer coated J or L Hooks, Bolts and Nuts 8mm dia with bitumen and G.I limpet washers filled with white lead complete upto any pitch in Horizontal /vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. |
| 50 | Providing and fixing aluminium work half glazed with 5.0mm thick glass pane and half poanelled with prelaminated particle board (Nova board/ equivalent) as per IS 12823 grade 1 type II in panelling for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene fillet etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (all fittings such as hinges handle and beading etc all are included and measured in Sq.M) (Fixed Section: Top/Bottom: [email protected]/mtr Middle double groove: [email protected]/m /// Door frame: [email protected]/mtr) For Fixed portion only |
| 51 | Providing and fixing aluminium work half glazed with 5.0mm thick glass pane and half poanelled with prelaminated particle board (Nova board) as per IS 12823 grade 1 type II in panelling for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene fillet etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (all fittings such as hinges handle and beading etc all are included and measured in Sq.M) ((((DOOR : V:[email protected] kg/mt, Top: [email protected]/mt, Bottom [email protected] Kg/mtr, middle: [email protected]/mtr)))) For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required |
| 52 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. Frame size 65 x 100 mm |
| 53 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 30mm thickness |
| 54 | Providing and fixing 1.5 mm thick Laminates (MARINO)glossy finish or simple mat finish as per requirement and direction of EngineerinCharge with adhesive of approoved make complete as and where required cost including all wastage and adhesive etc complete. |
| 55 | Providing and fixing of stainless steel tower bolts ISI marked of approved make jindal/ equivalent with necessary screw etc complete:250x10mm |
| 56 | Providing and fixing Stainless steel sliding door bolts ISI marked (of approved make jindal/equivalent) with nuts and screw etc . Complete: as per direction of Enginner in Charge.250x16mm |
| 57 | Providing and fixing Stainless steel handles ISI marked (of approved make jindal/equivalent) with nuts and screw etc . Complete: as per direction of Enginner in Charge. 100mm |
| 58 | Providing and finishing special quality bright finished brass hanging type floor door stopper with necessary screws etc complete |
| 59 | Renewing glass panes with Putty and nails wherever necessary: Float glass panes of thickness 4mm |
| 60 | Taking out the doors and window shutters and refixing them including screws as may be required. Including Cost of repairing of old door shutter of any size as per requirement along with refixing old fittings such as tower bolt, sliding door bolt, handles, (new fittings to be paid separately) with new hinges including painting the new portion with synthetic enamel paint of required shade with one coat of wood primer(cost of wood to be paid separately) including fixing in existing opening complete (Any size of any thickness)as per direction of Engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender