Tender For Construction Of Sakav On Chafe Khambacha Sada To Shankar Mandir Asondewadi Road Tal Dist Ratnagiri For Year 2025 26
Tender Value
48.81 Lakhs
Estimated cost
Bid Submission
01 Oct 2026
18 days left
EMD
60000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sakav On Chafe Khambacha Sada To Shankar Mandir Asondewadi Road Tal Dist Ratnagiri For Year 2025 26
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1 :- Construction of diversion road for safe vehicular traffic. |
| 2 | Item No. 2 :- Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 3 | Item No. 3 :- Removing Np-2 and Np-3 class pipes including stacking at road side as directedby the Engineer in charge. Upto 900mm dia. etc complete |
| 4 | Item No. 4 :- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary anddisposing off excavated stuff as directed etc. complete. |
| 5 | Item No. 5 :- Excavation for foundation in hard rock by blasting including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.a) Upto 1.50m lift |
| 6 | Item No. 6 :- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cmthick including hand packing and compacting etc. complete. |
| 7 | Item No. 7 :- Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works andpumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Enginner will be necessary ) |
| 8 | Item No. 8 :- Providing and laying plain in situ / ready mix M-15 cement concrete of trap/granite /quartzite/gneiss/crushed stone metal mechanically mixed, placed in foundation and compacted by vibration including necessary bailing out water, curing curing concrete batch mix plant / pan mixer with fine agreegates of required specifications ( VSI sand finely washed etc ) (excluding dewatering by pump) for 14 days RCC Grade.WithConcrete Mixer |
| 9 | Item No. 9 :- Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite /quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of \\"V\\" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m |
| 10 | Item No.10 :- Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in CM 1:3 and curing etc complete ( Excluding reinforcement) With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications (Natural sand /VSI sand finely washed etc ) |
| 11 | Item No.11 :-Providing and laying in situ / ready mix M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) i) Height up to 5 m, normal rate. |
| 12 | Item No.12 :- Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc |
| 13 | Item No. 13 :- Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. |
| 14 | Item No. 14 :- Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 15 | Item No. 15:- Providing tar paper bearing including laying in proper position etc. complete. |
| 16 | Item No. 16 :- Providing railing of mild steel angle post 2.0m center to center of section 75mmx75mmx10mmor equivalent I/C sectionof height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm diameter MS bar welded at the bottom and concreting of 1:3:6 of size 30cmx30cmx30cm with three rows of 40mm B class GI pipe provided at 30cm on center to center including scaffolding and one coat of anticorrosive paint with two coats of oil painting, curing of concrete etc. complete. |
| 17 | Item No. 17 :- Providing 100mm diameter GI water spouts as per detailed drawings in RCC slab and wearing surface / kerb etc. complete. |
| 18 | Item No. 18 :- Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) |
| 19 | Item No. 19 :- Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. |
| 20 | Item No. 20 :- Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete. |
| 21 | Item No. 21 :- Providing and laying in situ / ready mix M20 CC of trap/ granite/quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc.complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications (Natural sand / VSI sand finelywashed etc ) |
| 22 | Item No. 22 :- Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller etc. complete. |
| 23 | Item No. 23 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. |
| 24 | Item No. 24 :- Providing 450 mm dia NP-2 clas pipe and laying in proper line and level complete.. |
| 25 | Item No. 25 :- Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm ncluding painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. |
| 26 | Item No. 1 :- Laboratory testing charges for various materials required for item of work on the basis oftesting frequency and charges fixed by Vigilance and Quality Control Circle Pune. etc. complete. |
| 27 | A) Cement |
| 28 | Basic Test |
| 29 | B) Aggregate |
| 30 | Water Absorption, Specific Gravity,Impact Value, Crushing Value. |
| 31 | Sieve Analysis |
| 32 | C) Fine Aggregate |
| 33 | Fineness Modulus ( Sieve Analysis ),Silt & Clay Content |
| 34 | D) Mix Design |
| 35 | E) Concrete |
| 36 | Compressive Strength |
| 37 | F) Steel. |
| 38 | Up to 16 mm diameter (set of 3 bars) |
| 39 | Above 16 mm diameter ( Set of 3 bars ) |
| 40 | Item No. 1 :- Payment towards Royalty charges if Contractor produce original challan/pass. |
| 41 | Laterite Metal |
| 42 | Soil Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender