Tender For Repairs And Maintenance To The Borewell Hand Pumps, Borewell Pumpsets And Air Compressors At Ward No. 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17 & 18 In Sankagiri Municipaity.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
9 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenance To The Borewell Hand Pumps, Borewell Pumpsets And Air Compressors At Ward No. 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17 & 18 In Sankagiri Municipaity.
BOQ
| Sl. No. | Item Description |
| 1 | Servicing, removing, dismantling, assembling, re-erection, pipe, specials of following items of work as follows( The cost of the existing damaged coil other than burned coil should be deducted ) |
| 2 | 2 HP Submersible Motor |
| 3 | Motor Rewinding Charge |
| 4 | Replacement of cover sleeve |
| 5 | Shaft welding on two sides |
| 6 | Replacement of Thrust Bearing’s |
| 7 | Lathe work and fixing charge |
| 8 | Replacement of brass bush & clutch pad |
| 9 | Replacement of “O” ring & oil seal |
| 10 | Replacement of circlip lock |
| 11 | 2 HP Submersible Pump Over Handling : |
| 12 | Replacement of PVC impellor |
| 13 | Replacement of brass bushes |
| 14 | Replacement of S.S. bushes |
| 15 | Lathe works & fixing charge |
| 16 | Replacement of rubber bush |
| 17 | 5 HP submersible Motor : |
| 18 | Motor Rewinding charge |
| 19 | Replacement of cover sleeve |
| 20 | Shaft welding on two sides |
| 21 | Replacement of Thrust Bearing’s |
| 22 | Lathe work and fixing charge |
| 23 | Replacement of brass bush & clutch pad |
| 24 | Replacement of “O” ring & oil seal |
| 25 | Replacement of circlip lock |
| 26 | 5 HP Submersible Pump Over Handling : |
| 27 | Replacement of brass impellor |
| 28 | Replacement of brass bushes |
| 29 | Replacement of S.S. bushes |
| 30 | Lathe works & fixing charge |
| 31 | Replacement of rubber bush |
| 32 | 7.5 HP Submersible Motor : |
| 33 | Motor Rewinding charge |
| 34 | Replacement of cover sleeve |
| 35 | Shaft welding on 2 sides |
| 36 | Replacement of thrust bearings |
| 37 | Lathe work and fixing charge |
| 38 | Replacement of brass bush & clutch pad |
| 39 | Replacement of “O” ring & oil seal |
| 40 | Replacement of cir clip lock |
| 41 | 7.5 HP Submersible Pump Side : |
| 42 | Replacement of brass impellor |
| 43 | Replacement of brass bushes |
| 44 | Replacement of S.S. bushes |
| 45 | Lathe works & fixing charge |
| 46 | Replacement of rubber bush |
| 47 | 10 Hp Complete Winding Submersible labour |
| 48 | 10 Hp Complete Winding Open well labour |
| 49 | 10 HP Panal Board |
| 50 | 10HP Thrust bearing labour |
| 51 | (i) 2.00 HP Control Panel Starters : |
| 52 | Replacement of No volt coil |
| 53 | Replacement of Over load replay |
| 54 | Replacement of contractor |
| 55 | Replacement of starter contacts |
| 56 | (ii) 5 HP / 7.5 HP Control Panel Starters : |
| 57 | Replacement of No volt coil |
| 58 | Replacement of Over load replay |
| 59 | Replacement of contractor |
| 60 | Timer |
| 61 | Volt meter |
| 62 | Ammeter |
| 63 | Single phasing preventers |
| 64 | Replacement of starter contacts per |
| 65 | Service & fitting charges |
| 66 | Removal and rerection of submersible pump set in the existing borewell. |
| 67 | Up to 5.00HP submersible pumpset |
| 68 | Above 5.00HP - 10.00HP submersible pumpset |
| 69 | Above 10.00HP - 20.00HP submersible pumpset |
| 70 | Conveyance of power pump set and its accessories from the site uto 10km |
| 71 | Re-erect. of submersible pumpsets and its accessories from borewell for attending repairs. (above 5 HP) |
| 72 | submersible cables and service cable. |
| 73 | Replacement of 2.5 sq.mm 3core flat cu.cable - 1RM |
| 74 | Replacement of 4.0 sq.mm 3core flat cu.cable - 1RM |
| 75 | Supply and run of 2 of 4 sqmm cu Conductor for Service Connection main |
| 76 | Supply and run of 4 of 6 sqmm cu Conductor for Service Connection main |
| 77 | 4 Sq.mm Aluminium Wire (1 coil) |
| 78 | 7/18 Aluminium VIR Wire (1 coils) |
| 79 | Main switch and fuse units. |
| 80 | 16Amps fuse unit -1No |
| 81 | 32Amps fuse unit -1No |
| 82 | 63Amps fuse unit -1No |
| 83 | 63Amps MCB -1No |
| 84 | (i) GI Pipe |
| 85 | 32mm dia GI Pipe \\"B\\" Class |
| 86 | 40mm dia GI Pipe \\"B\\" Class |
| 87 | 50mm dia GI Pipe \\"B\\" Class |
| 88 | (ii) GI Specials |
| 89 | 32mm dia GI Union |
| 90 | 32mm dia GI Elbow |
| 91 | 32mm dia GI Tee |
| 92 | 32mm dia GI Coupling |
| 93 | 40mm dia GI Union |
| 94 | 40mm dia GI Elbow |
| 95 | 40mm dia GI Coupling |
| 96 | 50mm dia GI Union |
| 97 | 50mm dia GI Elbow |
| 98 | 50mm dia GI Tee |
| 99 | 50mm dia GI Coupling |
| 100 | (iii) UPVC pipe. |
| 101 | Replacement of 32mm UPVC pipe |
| 102 | Replacement of 40mm UPVC pipe |
| 103 | Replacement of 50mm UPVC pipe |
| 104 | Labour charges for removing HDPE hose submersible motor “ From the damaged borwell : |
| 105 | Labour charges for removing HDPE hoses from the damaged. Stuck borewell |
| 106 | Labour charges for removing submersible motor from the damaged stuck borewell |
| 107 | Attending repairs to deep borewell Hand pumps for bore well including removal of GI pipe plunger rods cylinders and re-erection hand pumps including loering the GI pipe plunger rods, Cylinders etc., complete |
| 108 | a) Up to 30.00m |
| 109 | b) Above 30.00m Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender