Tender For Repair Of Tourist Office In Kendrapada District
Tender Value
30.20 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
3 days left
EMD
30200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of Tourist Office In Kendrapada District
BOQ
| Sl. No. | Item Description |
| 1 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 2 | Ground floor |
| 3 | 1st floor |
| 4 | Removing old lime or cement plaster from walls in all floors including raking out joints 12mm deep and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineering-in-charge/Consultant. |
| 5 | Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. |
| 6 | Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials labour T & P etc complete as per direction of Engineer-in-charge. |
| 7 | Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth including cost, conveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. |
| 8 | Ground floor |
| 9 | 1st floor |
| 10 | Providing and fixing POP board false ceilling (12mm thick) to the G.I. Sections inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, including cost,conveyance,royality & cost of all labour,T&P etc complete as per specification & direction of the EIC/Archtects. |
| 11 | Supplying, fitting and fixing of M.S window grills in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. |
| 12 | Painting with two coats of texture paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 13 | Providing and painting two coats with synthetic enamel paint over a coat of zinc oxide primer of approved quality and approved shade on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading of all materials, cost of all labour, sundries, T&P, etc. complete in all respect as directed by Engineer-in-charge. |
| 14 | Dismantling grading concrete including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. (1ST Floor) |
| 15 | 40mm. (avg) thick grading concrete of prop. (1:2:4) with chicken mesh reinforcement on roof slab in all floors at all heights by using 12mm and downgraded size black hard (crusher broken) granite chips (12mm size 50°/o and 6mm size 50%) of approved quality from approved quarry including laying & compacting concrete, watering and curing including cost of all labour, sundries and T& P. etc. required for the work complete as directed by the Engineer. (1st Floor) |
| 16 | Providing and applying high performance torch applied APP based membrane Super Thermolay(STP Make) of 3mm thickness, APP Modified Waterproofing Membrane with Non Woven Polyester mat Reinforcement of 160 GSM Prefabricated& Self finished Five layered design super imposed with 20 micron Thermo fusible Film, by first applying Shalitex Primer (STP Make), Conforming to IS – 3384 @ 0.325 Kg per SQ.m (Oil based) & allowing it to dry & then torching of the membrane with the help of LPG/ Butane gas torch keeping overlapping of 4” at the side & 4” at the bottom & fusing of all the joints by gas torching & troweling with round shape smoll steel trowel & finally finishing with Bitumen based heat reflective/UV resistant Aluminioum paint, i.e Super Silver Shield @ 0.125 Kg/Sq.m including cost of all labour T&P etc complete in all respect as per direction of EIC. |
| 17 | Providing and lying plain cement concrete of (1:2:4) in foundation and floors using 12 mm. Size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries, T & P required for the work etc complete as per the instruction of the Engineer-in-Charge. |
| 18 | Repairing, fitting, fixing up Allu.door & upvc window made up alluminum/Upvc Section with 5mm thick glass (including) as panel fitted with rubber beading including locking,allu.wheel runner,window pile including all fittings with cost of materials ,all labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 19 | Repairing, fitting, fixing up old flush door including hinges,handle,tarbolt,door closer/luck & aldrop including cost of materials ,all labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 20 | Repairing, fitting, fixing up Allu.door & upvc window made up alluminum/Upvc Section with 5mm thick glass (including) as panel fitted with rubber beading including locking,allu.wheel runner,window pile including all fittings with cost of materials ,all labour, T&P etc. complete as per direction of Engineer-in-charge. |
| 21 | PH WORKS |
| 22 | Supplying ,fitting & fixing of waste pipe including cost of all materials,labour charges etc complete as per PH specification and direction of Engineering-in-charge. |
| 23 | Supplying all materials, labour, T&P and fixing standard sized pillar cock of Jaquar CON 011KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 24 | Supplying all materials, labour, T&P and fixing Bib cock of Jaquar CON 107KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 25 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock of Jaquar CON 059KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 26 | Supplying and fixing urinal of Hindware make having cat no 60002 or equivalent of approved make including all fittings like 450mm long connection pipe, waste coupling nut, waste pipe, urinal spreader etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. |
| 27 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge |
| 28 | Supply all materials, labour,T&P for fitting and fixing of PVC cistern of hindware make sleek fresh ISI or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. |
| 29 | Supplying all materials, labour, T&P and fixing 2 way Bib cock of Jaquar CON 041 KN or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 30 | Supplying all materials, labour, T&P and fixing standard sized CP towel ring of Jaquar Cat. No.-ACN-1121BN or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 31 | Supplying all materials, labour, T&P and fixing standard sized of Health faucet of Jaquar Cat. No.-ALD-573 or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 32 | Supplying all materials, labour, T&P and fixing standard sized of Glass shelf of Jaquar Cat. No.-Acn-1171N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 33 | Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. |
| 34 | 110mm dia |
| 35 | Landscaping |
| 36 | Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. |
| 37 | Planting of Fox tail palm 7'0' ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3'dia and 3' depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00) |
| 38 | Providing of decorative inner plants (2' to 3' ht) (like croton/Chinese bamboo/Dracaena/spidor plant/snake plant ) with decorative flower vase with good quality gardener soil including labour charges,T&P required for the work etc complete in all respect as per the specification & direction of Engineer in charge. |
| 39 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/ Norpak/ Anchor /Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo) /legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 40 | GROUP-A |
| 41 | GROUP-B |
| 42 | GROUP-C |
| 43 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 44 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 45 | Supplying,fixing of 2 nos 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type)( (flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 46 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 47 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 48 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) |
| 49 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 50 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 51 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 52 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 53 | 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years (FOR art craft,eco,galerry,food av,com hall,godown power light)) |
| 54 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 . the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years. |
| 55 | Supplying and fixing 63Amps 4P 415 volts MCB 415 volts, C series,10KA breaking capacity, Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB with connections as per direction of Engg.-in-Charge..Warranty on MCB is 3 years. |
| 56 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 57 | Supplying, installation, testing and commssioning of 1200 mm sweep Copper wound BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix /Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. |
| 58 | Supply, Installation, Testing and Commissioning of 300 mm sweep Wall fan of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. ( Make- Havells/ Crompton /Usha/Orient /Bajaj) |
| 59 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 60 | SITC of Sleek LED 10 watt light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 61 | SITC of recess/surface mounted 2'x2' (595mm x595mm x70mm (+/-5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 140lm/W and lumen output not less than 3600 lumens , CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj) . The luminaire must be Replacement Warranty will be 5 years. |
| 62 | SITC of 3 watt LED Ceiling Recessed mounted spot light in different Colour Aesthetically designed lens based of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 63 | SITC of 12 watt LED COB light made up of die cast aluminium body & Clear polycarbonate diffuser with 100Lm/Watt, Citizen COB, IP-54, SDCM<3, CRI 90, CCT - 3000K, as per the direction of Engineer-in-charge. (Make: K-Lite Model No - 28178 / Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 64 | SITC of 12 watt LED Ceiling Recessed mounted Downlight with Low depth Aluminium (99% Purity) Heat Sink, available in Round and Square shape. PC diffuser in white powder coated finish with independent electronic low THD (<10%) LED driver of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (Make: Panasonic/LT/ Havells /Philips/Wipro /K lite/Crompton/Bajaj). |
| 65 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 66 | Supplying,installation,testing & commissioning Of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per direction of Engg. in charge. |
| 67 | Supplying & laying of 25mm x 5 mm GI strip at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm . as required as per direction of Engg. in charge. |
| 68 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Make-POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster |
| 69 | Supply, installation, testing and commissioning of LED Design based BIS approved LED Street Light with system power of 120W, CCT in 5700K as per ANSI) ,CRI>70, SDCM<3 , LEDs used should have a life of 50,000 burning hrs. & Lumen maintenance as per L70. The Luminaire System lumens should be >=19,200 Lumens @5700K. The fixture housing must be Made of ADC 12 PDC Aluminium housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have a Ingress protection of IP66 and Impact Resistance of IK08. The light engine should use Metal Core PCB with high grade aluminium (AL5052) and should have a thermal conductivity of >2W/mK. The fixture should have an UV stabilized Injection moulded special PC lens optics(Glass not allowed) ensuring low glare & best in class uniformity. The light and the driver compartment should be thermally isolated by a natural airgap. Luminaire housing and optical compartment both should carry OEM's logo embossed / engraved (no stickering is allowed). The luminaire must have Integral encapsulated high efficiency electronic thermally isolated driver having a Aluminium extrusion construction with rated voltage of 100-300V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of min 6KV and upgraded with integrated IP67 protected SPD of 20KV/10KA surge protection with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse Polarity protection. . The compartment should be bottom openable for ease of maintenance at site. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. Following documents to be submitted after award of contract: Luminaire and Driver TDS, Photometry report, Type test certificate, IP, IK, Vibration and salt spray test certificates from NABL accredited Laboratory, LM80 from LED OEM., CE Certification, ROHS compliant, BIS Certificate for Luminaires & Drivers. The warranty on light fixture shall be 5 years. (Make: PHILIPS/WIPRO/BAJAJ/Crompton/PANASONIC/LT/HAVELLS) |
| 70 | Supplying, Installation, Testing & Commissioning of 1.5 TR Split AC with 5 Star BEE Rating of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16) |
| 71 | Supplying, Installation, Testing & Commissioning of 4 Kva wall hanging Stablizer of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make-V-Guard/ Microtek) |
| 72 | Supply,installation & fabrication of MS base frame for outdoor unit and other nesessary material to complete the job as required as per the direction of Engineer-in-Charge. |
| 73 | Supply,installation of hard/soft ISI marked copper refrigerant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 74 | Supply,installation & fabrication of 25mm nom. Dia pipe Insulated drain water piping from indoor to nearest drain point separate to all and other nesessary material to complete the job. |
| 75 | Supply, installation, testing & commissioning of 2500 VA (2.5 KVA) Sine Wave inverter with dual-battery (24V) 200 AH Inverter System including all accessories for power backup etc complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make Luminous/ Microtek) |
| 76 | Supply, Installation, Testing & Commissioning of Indoor Dome IR Network Camera (1/2.7\\" CMOS sensor, Mini. Pixel of 2560*1920 or higher video quality, frame rate of Up To 25fps @ 2MP, H.265, H.264 & MJPEg video compression, 2.8mm Fixed lens, physical ICR filter of both day and night, 30mtr IR Distance,120dB WDR ,3Streams Supported, WDR , 3D-DNR for noise reduction, BLC, ICR, EXIR, Audio In and Out, Alam in and out etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama) |
| 77 | Supply and Installation of outdoor Bullet IR Network Camera 1/2.7\\" CMOS, ICR, 2592*1944@ 25fps, 2MP H.265/H.264/MJPEG, Triple streams, DC12V & PoE, Micro SD card slot up to 256 GB, Alarm in/out , Audio 1/1, IP67, 2.7-13.5mm Motorized Varifocal lens, IR anti-reflection window, Built-in bracket, IR range: up to 50m, Digital WDR Range, 3D-DNR for noise reduction, Audio In and Out, Alam in and Out IPv4 network supported, IP67 rated for weather proofing etc complete with connection as required for the work as per direction of Engineer-in-Charge. (Make- CP Plus / Dahua / Prama) |
| 78 | Supplying, installation, testing & commissioning of Smart LED Monitor UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make- Frontech/ Zebronics/ Secureye ) |
| 79 | Supply, Installation, Testing & Commissioning of 8 CH NVR , 2TB Hard disk, 8 Port GIGA POE switch & 4u Rack etc complete with connection as required for the work as per direction of Engineer-in-Charge. ( NVR - CP Plus / Dahua / Prama , PoE - Hi-Focus / CP Plus / D Link, Hard Disc - Seagate/ WD ) |
| 80 | Supply, laying, Testing & Commissioning of Cat 6 4-pair UTP Cable etc complete with connection as required for the work as per direction of Engineer-in-Charge. ( Make - D Link/ Digisol/ Prama ) |
| 81 | Supplying, installation, Testing & commissioning of 55\\" Smart LED Television, 4K UHD,Vibrant Viewing in Ultra High Resolution, commercial type of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (LG/ Samsung /Sony) |
| 82 | Suppy, installation, testing & commissioning of Storage typeWater Cooler-Cum-Purifier with Standard Accessories of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. (Make - Blue Star /Eureka Forbes / Equivalent ) Water Cooler •Storage Capacity: 30 Litres• Cooling Capacity: 15 Litres per hour• Faucets: 02 (1 Chilled Water + 1 Normal Water)• Power Consumption: 300 Watts | 220-240V• Material & Build: Food-grade Stainless Steel Tank & Chassis• Refrigerant: Eco-friendly R134APurifier • Purification Technology : Reverse Osmosis (RO) + Ultraviolet (UV)• Purification Capacity : 30 Litres per hour• Daily Duty Cycle : Up to 150–200 Litres per day• TDS Rejection Rate : 90% to 95%• Input Water TDS Limit : Up to 2,000 ppm• Filter Configuration : 10-Micron Sediment Filter & 10-inch Activated Carbon Block• UV Lamp Power : 11 Watts• Power Consumption : 60 Watts• Inlet Water Pressure : 0.5 to 2.0 kg/cm²• Automation Features : Built-in auto-flush timer, dry-run protection, and fully automatic cutoff• Mounting Type : Compact, open-frame structural skid for seamless water cooler pairing |
| 83 | Supply and Installation of HP (440G9) All In One Desktop-14th Gen, Intel Core i-5 Processor, Windows-11, Ms Office, 16GB Ram, 512 SSD, 23.8'' Display (3 Year Onsite Warranty) etc complete with all materials & labour as required as per the direction of Engineer-in Charge. |
| 84 | Supply and Installation of Luminous 600VA UPS etc complete with all materials & labour as required as per the direction of Engineer-in Charge. |
| 85 | Supply and Installation of HP Laser Jet Pro Mfp 4104Dw Printer etc complete with all materials & labour as required as per the direction of Engineer-in Charge. |
| 86 | Fabrication, supply and fixing of informatorily retro reflective sign boards using super high efficiency, TYPE XI sheeting as per IRF 67-2012 Code with white colour bonded on to 4mm Aluminium Composite panel (0.25+3.50+0.25 -PVCF coated) cover which alphabets and unbreaks are reverse cut made using Electro cut able film with computerized cutting plotter. the board shall be provided with frame mode out of stainless-steel pipes of 304 grade. it shall be mounted on vertical posts made out of 80mm NB Stainless pipe including necessary excavation for M-20 foundations concreting/ revelling, etc necessary for fixing of the board and conveyance of all materials, equipment, machinery and labour with all leads and lifts, loading and unloading charges etc complete in all respect as per specification & direction of Engineer-in-Charge. |
| 87 | Required stainless steel frame of 80mm NB made out of 304 grade steel pipe including cost of all material, transportation complete as per specification & direction of Engineer-in-Charge. |
| 88 | Providing and laying plain cement concrete of proportion (1:1.5:3) in foundation and floors using Portland slag cement (PSC) with 12mm size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleared including hoisting, lowering, laying concrete, ramming, watering and curing etc complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties of all materials and cost of all labours, sundries T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-Charge. (0.45x0.45x0.63 = 0.1275) x2= 0.255 Cum Per Nos |
| 89 | Fabrication, supply and fixing of LED Signage Board made up of MS Pipe frame including 3mm ACP (Acrylic/Frame/Acp router cutting Single Side) of Size- 8' x 3' including cost of all material, transportation complete as per specification & direction of Engineer-in-Charge. . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender