Tender For Construction And Renovation Of Surangi Phc New Building As Per Ama Hospital Initiative Phase-Ii
Tender Value
51.18 Lakhs
Estimated cost
Bid Submission
18 Sep 2026
5 days left
EMD
51200
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction And Renovation Of Surangi Phc New Building As Per Ama Hospital Initiative Phase-Ii
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation in hard soil including hard moorum, stoney earth mixed with boulders (except sheet rock & builders requiring blasting) with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, Cess and T&P and dewatering if required for the work etc. complete and directed by the Engineer-in-charge. Ground Floor |
| 2 | Entrace Gate |
| 3 | Compound Wall |
| 4 | Approach Road |
| 5 | Supplying and filling in foundation & plinth with sand in 23.5 cm (9) thick layers including watering and ramming with cost, conveyance, Royalty, DMF, EMF & Additional Charges of all materials, and labour with T&P required for the work including Cess etc complete. (Measurement will be taken on finished compacted section only) as per direction of Engineer-in-Charge. |
| 6 | Entrace Gate |
| 7 | Compound Wall |
| 8 | Approach Road |
| 9 | Providing & filling mannually with excavated earth materials including watering ramming to proper density with all leads and lifts including cost of all labour T & P& Cess required for the work etc complete as per specification & direction of Engineer-in-charge. |
| 10 | Excavation loading unloading and carriage by mechanical means of all kinds of soil including stoney earth gravel and moorum etc. intersepread with boulders upto ½ cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the excavated materials away from work site as per the specification and as directed by the Engineer-in-Charge within an intial lead of 1 Km. from the place of excavation complete. |
| 11 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance Royalty, DMF, EMF & Additional Charges , labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge (GF) |
| 12 | Entrace Gate |
| 13 | Compound wall |
| 14 | Approach Road |
| 15 | Providing cement concrete of (1:2:4) using 12mm and down graded size hard granite stone aggregate including cost and conveyance of all materials to site, and all labour charges complete including cost, conveyance, Royalty, DMF, EMF & Additional Charges , , labour, Cess & T&P & all other materials required for the work complete as per the direction of the Engineer-in-charge.Approach Road |
| 16 | RCCwork of gradeM-25 having a minimum compressivestrength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where neCessary including cost, conveyance and Royalty, DMF, EMF & Additional Charges of all materials and labour required for the worketc, complete with all T&P and Cessin all respect but execludingcost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base Footing GF |
| 17 | Gate Entrance Footing |
| 18 | compound wall Footing |
| 19 | Plinth Beam (GF) |
| 20 | Plinth Beam Gate Entrance |
| 21 | Plinth Beam Compound wall |
| 22 | Column in s/s |
| 23 | Gate Entrance column GF |
| 24 | Gate Entrance column first floor |
| 25 | Column Compound wall |
| 26 | Lintel Band |
| 27 | Lintel Band gate entrance (GF) |
| 28 | Lintel Band gate entrance (FF) |
| 29 | Roof Beam |
| 30 | Gate Entrance Beam |
| 31 | Roof Slab |
| 32 | Gate Entrance Beam Roof Slab |
| 33 | Chajja |
| 34 | Straightening bent up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required) the M.S. Rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works and including allcost, conveyance andof M.S. rods or Tor steel and binding wires of 18 to 20 gauge and labour with all T&P & Cess required for the work etc. complete in all floors (weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rods or Tor steel only.) etc completeas per specification & direction of Engineer-in-charge |
| 35 | Gate Entrance GF |
| 36 | Gate Entrance FF |
| 37 | Compound wall |
| 38 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all Royalty, DMF, EMF & Additional Charges with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. |
| 39 | Compound wall |
| 40 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all Royalty, DMF, EMF & Additional Charges with all T&P & Cess etc, complete in all respect as per the direction of Engineer-in-charge. IN SUPER STRUCTURE |
| 41 | Entrace Gate (SUPER STRUCTURE) GF |
| 42 | Entrace Gate (SUPER STRUCTURE) FF |
| 43 | Compound wall |
| 44 | Fitting and fixing of M.S. window/door/Ventilator/angles as per approved design including cost of all materials and Cess complete as per specification and direction of Engineer-In-Charge. |
| 45 | Gate Entrance |
| 46 | Labour for fitting and fixing of M.S. Gate/window/door as per approved design including cost of all materials and Cess complete as per specification and direction of Engineer-In-Charge. |
| 47 | Painting two coats with enamel paint over a coat of priming to wood/iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance andof all materials and labour with T&P required for the work with Cess etc, complete as per the direction of the Engineer-In-Charge. |
| 48 | Gate Entrance |
| 49 | Supplying,fitting fixing of openable UPVC door with door frame of approved make with 6mm glass of approved quality complete with frame shutter and all fitting and fixture complete as per direction of the E.I.C |
| 50 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. complete as per direction of the E.I.C |
| 51 | 12mm (5/8) thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9 thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge. (GF) |
| 52 | Gate entrance |
| 53 | Compound wall |
| 54 | 16mm (5/8) thick cement plaster in C.M. (1:6)finished smooth to inside surface of 9 thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all , Royalty, DMF, EMF & Additional Charges & Cess etc, complete in all floor as per direction of Engineer-in-charge. |
| 55 | Compound wall |
| 56 | Fixing vetrified tile (industrial floor tiles) of size 300mm x 300mm tiles in floors treads or steps and landingon 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles including cost,conveyance of all materials,Royalty, DMF, EMF & Additional Charges andof all materials & labour T&Pfor the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 57 | Fixing vetrified tile (coloured/printed series) of size 600mm x 600mm tiles in floors treads or steps and landingon 25mm thick bed of cement mortar 1:1(1cement : 1sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete excluding cost of precast tiles including cost,conveyance of all materials,Royalty, DMF, EMF & Additional Charges andof all materials & labour T&Pfor the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 58 | Providing and fixing 30cmx30cm / 40cmx40cm special plain / printed series ceramic floor tiles in floors, treads of on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost,conveyance of all materials,Royalty, DMF, EMF & Additional Charges andof all materials & labour T&Pfor the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 59 | Providing and fixing 30cmx30cm /20cmx20cm special plain / printed series ceramic floor tiles in floors, treads of on 25mm th bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including cost,conveyance of all materials,Royalty, DMF, EMF & Additional Charges andof all materials & labour T&Pfor the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 60 | Providing, fitting & Fixing vetrified Fixing tiles in dado, skirting and rises of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost,conveyance of all materials,Royalty, DMF, EMF & Additional Charges andof all materials & labour T&Pfor the work etc, complete in all respect as per specification and direction of Engineer-in-charge. |
| 61 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materialslabour T&P & Cess etc complete as per direction of EIC. |
| 62 | Finishing wall surface two coats with any approved weather shield cement paint over a coat of oil bound primerto outer wall surface after celaning surface including cost of paint and primer watering curing with cost conveyance andof all materials and labour with T&P and Cessrequired for the work etc, complete in all respect as per the direction of Engineer-in-Charge. (GF) |
| 63 | Gate entrance |
| 64 | Compound wall |
| 65 | Wall painting two coats with plastic emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls suraface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance andof all materials and labour with T&P required for the work with Cess etc complete as per direction of Engineer-in-charge |
| 66 | Supplying fitting of Stainless steel of 304 garde in hand railing using 50 mm dia of 2 mm thick circular pipe with balustarade of size 32mm X 32 mm X X2 mm in 3 rows in stair case as per approved design and specification buffering polisging etc. including cost conveyance of all materials complete as per direction of the Engineer- in - Charge. |
| 67 | 6mm thick cement plaster in cement mortar (1:4) to ceilling of roof lintel and chajjas after chipping and chiselling the same and clearing the surface by wire brush finished smooth watering and curing for 7 days including cost,conveyance of all materials and labour with T&P & Cess required for the work withand Royalty, DMF, EMF & Additional Charges etc complete in all respects in all floors as per direction of Engineer-in-Charge. |
| 68 | Gate Entrance GF |
| 69 | Gate Entrance FF |
| 70 | Providing 2.5Cm. Thick grading concrete (1:2:2) on roof slab with 6mm and down grade size hard broken granite chips for old works including cost, conveyance & of all materials labour, Cess T&P etc. complete in all respect as per specification and direction of Engineer-In-Charge. |
| 71 | Construction of granular sub-base by providing Gr-IV material stone screening, spreading in uniform layer with mortor graded on prepared surface, mxing mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density etc. complete as per clause 401 of MoSRT&H specification for road and bridge work (4th revision) including cost conveyance and Royalty, DMF, EMF & Additional Charges of all materials with all labur T&P Cess etc complete and as per direction of Engineer-in-Charge. Approach road |
| 72 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC Approach road |
| 73 | Dis Mantaling Ground Floor Dismantling and removing R.C.C. columns, beams, slab, staircase, landing lintels including stacking the useful materials for reuse and removing the debris within 50M lead away from work site including cost of all labour with T & P & Cessrequired for the work as per direction of Engineer-in-Charge. |
| 74 | Dismantling brick or stone masonry in lime or cement mortar under 3M (10-0) height including stacking the useful materials for reuse and removing the derbies within 50m lead away from the work site including cost of all labour with T & P,Cess required for the work as per direction of Engineer-in-Charge. |
| 75 | Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 76 | Providing & filling mannually with excavated earth materials including watering ramming to proper density with all leads and lifts including cost of all labour T & P& Cess required for the work etc complete as per specification & direction of Engineer-in-charge. |
| 77 | Dismantling and removing doors & windows and ventilators including removal of frames, hinges fastening, stacking the same for reuse and removing the debris with in 50m lead withcost of all labour, T&P & Cessetc. complete as per direction of Engineer-in-Charge. |
| 78 | Removing Old grading plaster from roof slab,cleaning the surface, lowering & removing the debris within 50m lead including cost of all labour, Cess T&P required for the work etc. complete as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender