Tender For Construction Of Office Building For Rws&S Section, Kalyansinghpur Under Rws&S Division, Rayagada
Tender Value
24.25 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
24251
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building For Rws&S Section, Kalyansinghpur Under Rws&S Division, Rayagada
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF OFFICE BUILDING FOR RWS&S SECTION, KALYANSINGHPUR UNDER RWS&S DIVISION, RAYAGADA |
| 2 | SECTION OFFICE Civil Work Earth work in excavation of foundation in all kinds soil including dressing and leveling the bed and depositing the soil within 50 m initial lead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge. |
| 3 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 4 | Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. |
| 5 | Fly Ash brick masonary in Foundation and Plinth in cement mortar (1:4) in using Fly ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2 including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. |
| 6 | R.C.C. work of M20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in position. |
| 7 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in ground floor. Column |
| 8 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in ground floor. Lintel |
| 9 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in ground floor. Chajja |
| 10 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in ground floor. Stair Case |
| 11 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling then after casting including cost of materials complete in ground floor. Wall Beam Ground Floor |
| 12 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 13 | Fly Ash brick masonary in Foundation and Plinth in cement mortar (1:6) in using Fly ash Bricks of 25cm x 12cm x 8 cm having crushing strength not less than 75 Kg/Cm2 including watering, curing and cost, conveyance, royality of all materials & cost of labour charges etc complete. |
| 14 | Supplying of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S. Door/ window grill with all labour, iron fitting fitted and fixed in all respect including cost of iron etc. complete. |
| 15 | Providing 2.5cm thick Grading Concrete in C.C (1:2:4) with 4.7 mm size CBHG Chips on new roof slab including cost of materials , labour, T&P all comp. |
| 16 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 17 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 18 | Supplying, fitting and fixing vetrified tiles in floor of size 600mm x 600mm of approved make conforming to IS-13755 laid on 20mm thick cement mortar(1:4) and filling joints with white cement of approve quality including cost of all materials, taxes labour, T&P etc. complete. Required for the work. (Using Premium quality of tile from approved brand). |
| 19 | Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge |
| 20 | Supplying, fitting and fixing of Ceramic wall tiles 20 cm x 30 cm/ 20 cm x 20 cm special plain/ printed series of approved make as directed by Engineer-in-charge in dados skirting with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost of all materials, taxes labour, T&P etc. complete required for the work. |
| 21 | Supplying & providing Wall painting two coats with weather coat paint of approved shade on new work to give an even shade inculding cost of paint. |
| 22 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade exculding cost of distemper. |
| 23 | Painting two coats with any approved enamel paint of approved colour, shade over one coat primer on new steel work and wood work including sand papering, polishing the surface, cost, conveyance, taxes of all materials and labour with T & P etc. complete as per specification and direction of Engineer-in-charge. |
| 24 | Supplying & Providing fitting fixing PVC door shuters including cost conveyence etc complete |
| 25 | Electrical Works Recessed wiring to light point / fan point/ exhause fan point/ call bell point with 1.5 sqmm FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metallic VC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked (L&T / Crabtree/ Havells / ROMA / Siemens/ Finolex) and ceiling rose ISI marked mounted on modular GI Box of 18 SWG having modular base and cover of suitable size with 1.5 Sqmm FR PVC Insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of the Engineer-in-Charge (Make of wire Finolex / L&T / Anchor/ Havels / V Guard). Group A L.P, FP-1, CP |
| 26 | Group B L.P, FP-1, CP |
| 27 | Group C L.P, FP-1, CP |
| 28 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 29 | Supply and fixing of 2 no.s of 6 pin 6A,1 no 16 amp modular socket,switch and S.P.6,16 amp one way modular switch, on Modular G.I. Box with Modular Base and cover. |
| 30 | Supply and fixing of 3 no .s of 5 pin 6 amp and 1 no 6 pin 16 A modular socket and one way modular switch, on Modular G.I. Box with Modular Base and cover |
| 31 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required |
| 32 | Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.) (2 bags required for each earthing electrode.) |
| 33 | Recessed submain wiring along with earth wire with the following sizes of PVC Insulated single core multistrand copper conductor ISI marked conforming to IS 694/1990 in 20 mm dia non metallic heavy duty flexible conduit 1.6 mm in recess PVC Conduit as required (Make of wire Finolex /L&T / Anchor/Havels / V Guard). 2x2.5mm2 + 1 x 1.5mm2 |
| 34 | -Do- 2 x 4mm2 + 1 x 1.5 mm2 |
| 35 | S/F of Ceiling fan including all accessories of USHA (Mist air icy blue) crompton wall mounted fan high flo LG 18\\" make and connection |
| 36 | S/F of following MODULAR type regulator on the existing switch box / cover including connections etc as required. |
| 37 | Supplying fitting and fixing of 50W LED Flood Light of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 38 | Supplying fitting and fixing of 15W LED Baten Light of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 39 | Supplying fitting and fixing of 8 pole MCB DB of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 40 | Supplying fitting and fixing of MCB of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. 16 A MCB |
| 41 | 32 A MCB |
| 42 | 32 A 2 pole isolator |
| 43 | PH Works Providing & fixing to wall or ceiling and floor UPVC & CPVC pipe of the following nominal bore & the fittings and clamps including making good the wall,celling and floor, all complete as per specification in ground floor. 25mm dia UPVC pipe |
| 44 | Providing & fixing to wall or ceiling and floor UPVC & CPVC pipe of the following nominal bore & the fittings and clamps including making good the wall,celling and floor, all complete as per specification in ground floor. 20mm dia UPVC pipe |
| 45 | Supplying fitting fixing of P.H. fixtures including all cost conveyance labour T&P & taxes etc all complete as per specification and direction of Engineer-in-charge. Porcelain A.I.W.C with S strap |
| 46 | -Do- 10 litr pvc low level cistern with fittings (Make-Hindware)(Toilet-I1No., Toilet-II-1No.) |
| 47 | -Do- Wash basin 400x400 mm |
| 48 | Two in one Health Faucet with 1.5 1 RM Tube ith Hook |
| 49 | 2 in 1 Bib cock |
| 50 | 15mm dia C.P. Long body bib cock. |
| 51 | 15mm dia C.P. Pillar cock. |
| 52 | 15mm dia C.P. angular stop cock. |
| 53 | CP Shower (Over Head) |
| 54 | 15mmx600mm PVC connection pipe. |
| 55 | C.P.soap holder/disc |
| 56 | C.P.towel rail.(600x20mm) |
| 57 | 20mm dia Conceal stop Cock with brass body |
| 58 | Waste Pipe |
| 59 | Jally |
| 60 | C.P Flange |
| 61 | Tank Nipple |
| 62 | 25mm dia Brass/GM Ball Valve |
| 63 | 20mm dia Brass/GM Ball Valve |
| 64 | Bath Room Mirror |
| 65 | Over head Shower Round 3'' |
| 66 | Supplying fitting fixing laying following PVC SWR pipes & fitting including jointing with rubber ring to wall with supply of nails, bobbins wall plug and cutting the pipes to length and wastage including supply of all materials T&P along with jointing materials, testing the pipe line as per P.H. specification and direction of Engineer-in-charge. 110mm Dia PVC SWR Pipe |
| 67 | 3- Layer white Rotational Moulded Cylinderical vertical water storage tanks ( ISI Marked) of 2000 liter capacity. |
| 68 | 24\\" X 18\\" X 10\\" STEEL sink single bowl (Parry ware) N.B: The amount put to tender is exclusive of GST. The intending bidders should offer their rate which shall be exclusive of GST as per norms. GST applicable onwards contract shall be paid over the bill amount at the time of payment of each bill. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender