Tender For Construction Of D Type Quarter For Rws&S Sub-Division, Muniguda Under Rws&S Division, Rayagada
Tender Value
32.50 Lakhs
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
32500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rayagada → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of D Type Quarter For Rws&S Sub-Division, Muniguda Under Rws&S Division, Rayagada
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF \\"D\\" TYPE QUARTER FOR RWS&S SUB-DIVISION, MUNIGUDA UNDER RWS&S DIVISION, RAYAGADA |
| 2 | AEE Quarter Civil Work Excavation of foundation in hard soil within initial lead of 50 mtr and lift of 1.5 mtr etc including levelling and dressing the foundation trenches, stacking the excavated materials away from the work site etc as per the instruction of E.I.C. |
| 3 | Supplying, filling in foundation & plinth with well watered sand in layers not exceeding 150mm thick including watering and ramming with cost conveyance, royalities, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer-in-charge. |
| 4 | Providing Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size black broken granite stone aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm(6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royality taxes of all materials and labour with T&P required for the work etc. complete i as per direction of the Engineer-in-charge. |
| 5 | Brick work with Fly Ash brick in foundation & plinth using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. |
| 6 | Cement concrete M-20 grade with 20mm down graded size C.B.H.G. chips for R.C.C. works including hoisting and laying per 1 cum. Column Base |
| 7 | -Do- Column |
| 8 | -Do- Plinth beam |
| 9 | -Do- Lintel |
| 10 | -Do- Chajja |
| 11 | Wall Beam Ground Floor |
| 12 | -Do- Roof Slab Ground Floor |
| 13 | Cutting, bending, binding and tying the grills and placing in position including cost of binding wires and HYSD reinforcing bars . |
| 14 | Brick work with Fly Ash brick in superstructure using 25cmx12cmx8cm size bricks having crushing strength not less than 35kg./cm2 with dimensional to lerance 2% in c.c. (1:6) after immersing the bricks for six hours in water before use in foundation & plinth, basement & for ornametal flower heads plinth moulding & similar such type of works with all necessary projection, cutting, moulding, corebelling, chamfering, watering & curing including cost, conveyance, royalties & all type of taxes of all materials & labour, T&P required for the work etc. complete as per specification * direction of the E.I.C. |
| 15 | 20mm thick grading plaster with cement mortar (1:4) over roof slab after chipping and chiselling the same and cleaning the surface by wire brushing laid to proper slope finished smooth, watering and curing including cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalities etc. complete as per direction of the Engineer-in-charge. |
| 16 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge. |
| 17 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge. |
| 18 | Providing fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of approved make on 25mm thick bed of cement mortar (1:1) joint with neat cement slury mixed with pigment to match the shade of tile including polishing, rubbing etc. including cost, conveyance, royalty, taxes of all materials and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-charge. |
| 19 | Supplying fitting & fixing of Vitrified tile in dado in force treade or steps and including on 25mm thick bed of cement mortar (1:1) joint with net cement slowray mixed with prgment to materials the shades of tiles including rubbing & polishing etc. with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge |
| 20 | Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost and conveyance, royalities of all materials, all labour taxes with all T&P etc. complete in all floors as per direction of the Engineer-in-charge. |
| 21 | Supplying, fiting and fixing of 35mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete. |
| 22 | Supplying. fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 23 | Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge. |
| 24 | Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge. |
| 25 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 26 | Distempering two coats to walls with distemper of approved shade on old work one coat to give an even shade including cost of distemper per 1 sqm.(Ref. P-99, item-22 of A/R- 06). Data 10 sqm |
| 27 | Supplying. Fitiing and fixing of stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm 2mm @ 0.90mtr.c/c and stanless square pipe bracing of size 32mm x 32mm 2mm in 3 rows in stair case as per approved design etc.complete. |
| 28 | Electrical Works Recessed wiring to light point / fan point/ exhause fan point/ call bell point with 1.5 sqmm FR PVC Insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metallic VC flexible conduit with S.P 5/6Amp, one way modular switch ISI marked (L&T / Crabtree/ Havells / ROMA / Siemens/ Finolex) and ceiling rose ISI marked mounted on modular GI Box of 18 SWG having modular base and cover of suitable size with 1.5 Sqmm FR PVC Insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of the Engineer-in-Charge (Make of wire Finolex / L&T / Anchor/ Havels / V Guard)Group A L.P, FP-1, CP |
| 29 | -Do- Group A L.P, FP-1, CP |
| 30 | -Do- Group A L.P, FP-1, CP |
| 31 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 32 | Supply and fixing of 2 no.s of 6 pin 6A,1 no 16 amp modular socket,switch and S.P.6,16 amp one way modular switch, on Modular G.I. Box with Modular Base and cover. |
| 33 | Supply and fixing of 3 no .s of 5 pin 6 amp and 1 no 6 pin 16 A modular socket and one way modular switch, on Modular G.I. Box with Modular Base and cover |
| 34 | Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required |
| 35 | Maintenance free Safe Earthing Electrodes with ISI G.I. pipe dia 75mm as Secondary electrode with wall thickness of 2.6 mm and the Primary Earthing Electrode will be 50mm X 6mm X 1no M.S. hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the Primary Earthing and the secondary Earthing, the Surface Area in will be 7,06,500sqmm for 3mtrs length and Cross Sectional Primary conducting area is 300 sq.mm. An Solid G.I. Base plat seals the unit at the bottom. as per direction of Engg.-in-Charge. (MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(MES-GFC ground Filling compound will be provided in 25 kgs Bags.)(2 bags required for eachearthing electrode.) |
| 36 | Recessed submain wiring along with earth wire with the following sizes of PVC Insulated single core multistrand copper conductor ISI marked conforming to IS 694/1990 in 20 mm dia non metallic heavy duty flexible conduit 1.6 mm in recess PVC Conduit as required (Make of wire Finolex /L&T / Anchor/Havels / V Guard) 2x2.5mm2 + 1 x 1.5mm2 |
| 37 | -Do- 2 x 4mm2 + 1 x 1.5 mm2 |
| 38 | S/F of Ceiling fan including all accessories of USHA (Mist air icy blue) crompton wall mounted fan high flo LG 18\\" make and connection |
| 39 | S/F of following MODULAR type regulator on the existing switch box / cover including connections etc as required. |
| 40 | Fitting And Fixing Of Exhaust Fan Complete With Necessary Accessories, Supports And Electrical Connections, Testing And Commissioning, Complete As Required |
| 41 | Supplying fitting and fixing of 50W LED Flood Light of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 42 | Supplying fitting and fixing of 15W LED Baten Light of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 43 | Supplying fitting and fixing of MCB DB of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete. |
| 44 | Supplying fitting and fixing of MCB of approved make with ISI mark including all cost of materials, labour, carriage, taxes etc complete.16 A MCB |
| 45 | -Do- 32 A MCB |
| 46 | -Do- 32 A 2 pole isolator |
| 47 | PH Works Providing & fixing to wall or ceiling and floor UPVC & CPVC pipe of the following nominal bore & the fittings and clamps including making good the wall,celling and floor, all complete as per specification in ground floor25mm dia UPVC pipe |
| 48 | -Do- 20mm dia UPVC pipe |
| 49 | Supplying fitting fixing of following P.H. fixtures including all cost conveyance labour T&P & taxes etc all complete as per specification and direction of Engineer-in-charge.White Vitreous China EWC Pattern with 'P' Trap and White plastic seat and cover with CP brass hinges and rubber buffer |
| 50 | -Do- Porcelain 23'' I.W.C. (Orissa Pan) |
| 51 | -Do- 10 litr pvc low level cistern with fittings (Make-Hindware)(Toilet-I1No., Toilet-II-1No.) |
| 52 | -Do- Basin with Pedestal (Toilet-I1No., Toilet-II-1 No.) |
| 53 | -Do- Two in one Health Faucet with 1.5 1 RM Tube ith Hook |
| 54 | -Do- 2 in 1 Bib cock (Toilet-I1No.) |
| 55 | -Do- 15mm dia C.P. Long body bib cock.(Toilet-I1No.,Toilet-II-3No.) |
| 56 | -Do- 15mm dia C.P. Pillar cock.(Toilet-I1No.) |
| 57 | -Do- 15mm dia C.P. angular stop cock.(Toilet-I-1No.,Toilet-II-4No.) |
| 58 | -Do- CP Shower (Over Head) (Toilet-I1No.) |
| 59 | 15mmx600mm PVC connection pipe.(Toilet-I1No.) |
| 60 | C.P.soap holder/disc(Toilet-I1No.) |
| 61 | C.P.towel rail.(600x20mm) (Toilet-I1No.) |
| 62 | 20mm dia Conceal stop Cock with brass body (Toilet-I1No.) |
| 63 | Waste Pipe(Toilet-I1No.) |
| 64 | Jally(Toilet-I1No.) |
| 65 | C.P Flange(Toilet-I1No.) |
| 66 | Tank Nipple |
| 67 | 25mm dia Brass/GM Ball Valve |
| 68 | 20mm dia Brass/GM Ball Valve |
| 69 | Bath Room Mirror |
| 70 | Over head Shower Round 3'' |
| 71 | Supplying fitting fixing laying following PVC SWR pipes & fitting including jointing with rubber ring to wall with supply of nails, bobbins wall plug and cutting the pipes to length and wastage including supply of all materials T&P along with jointing materials, testing the pipe line as per P.H. specification and direction of Engineer-in-charge. 110mm Dia PVC SWR Pipe |
| 72 | 3- Layer white Rotational Moulded Cylinderical vertical water storage tanks ( ISI Marked) |
| 73 | 24\\" X 18\\" X 10\\" STEEL sink single bowl (Parry ware) |
| 74 | Septic Tank Construction Of Septic Tank Of Required Capacity, Including Earthwork In Excavation, Bedding, Pcc, Rcc/Masonry Work, Internal And External Plastering, Waterproofing, Provision Of Inlet And Outlet Pipes, Manhole Covers, Vent Pipe, And All Necessary Fittings, Including Backfilling, Curing, Testing And All Incidental Works, Complete As Per Specification |
| 75 | Toilet Construction Of 4' x 4' Size Toilet Complete With Rcc Roof Slab, Brick Masonry, Flooring, Plastering, Sanitary And Water Supply Fittings, Waste-Water Connections, Door And All Incidental Works, Complete As Required N.B: The amount put to tender is exclusive of GST. The intending bidders should offer their rate which shall be exclusive of GST as per norms. GST applicable onwards contract shall be paid over the bill amount at the time of payment of each bill. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender