Tender For Constructionructio Of Two Disable Friendly Toilets Fro Pwd Girl Students
Tender Value
5.86 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
5900
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kandhamal → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constructionructio Of Two Disable Friendly Toilets Fro Pwd Girl Students
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation inall kinds of soil including dressing and levelling the bed and depositing the soil within intial lead of 50m and intial lift of 1.5m as may be directed and providing shoring and shuttering and struts if necessary complete.Footing for Tie Beam Ramp |
| 2 | Supplying , filling in foundation and plinth with sand well watered and rammed in 22.5cm 9\\" layers with all leads and lifts cost , conveyance , labour, T and P etc. complete ( measurement will be taken on finished compacted section only)Footing for Tie Beam, 1/3rd of item no. (1.00) , Flooring, Ramp. |
| 3 | Cement concrete (1:3:6) in foundation and plinth with H.G.C.B. Metal of 4cm .( 1/2 inch) size including lowering,laying,cost,conveyance,royalties,taxes,labour,T and P watering, curing etc. complete. In all respect. Footing for Tie Beam , Flooring , Ramp. |
| 4 | Plain cement concrete (1:2:4) using 12mm size black hard crusher broken granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete in layers, watering, curing etc. complete including cost, conveyance , royalties of all materials with labour, labour cess and T and P etc. required for the work complete as per the direction ofthe Engineer-in-charge.Flooring, Ramp. |
| 5 | Reinforced cement concrete work of M20 with 12mm and 20mm size chips. For R.C.C work including cost of centering and shuttering charges.(a) Footing ( Column upto plinth ) |
| 6 | (b) Plinth Beam (L.W,C.W) |
| 7 | © Column Above Plinth Level ( 0.300x0.300) |
| 8 | (d) Roof Beam (0.300x0.300) |
| 9 | (e) Roof Slab |
| 10 | (f) Lintel |
| 11 | (g) Chajja |
| 12 | Cutting, bending, binding and tying the M.S. Rod or Tor steel for RCC work in cluding cost of all labour and materials etc. complete as per direction of Engineer-in-charge. |
| 13 | First class Fly ash Brick masonry using bricks of size 230 mm. x 110 mm. x 80 mm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in foundation & plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 14 | First class Fly ash Brick masonry using bricks of size 230 mm. x 110 mm. x 80 mm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge. |
| 15 | Providing 12 mm thick Cement Plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 16 | Providing 16 mm thick Cement Plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. |
| 17 | Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 18 | Priming one coat with wall primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. |
| 19 | Painting two coats with approved anti-fungal weather seal paints (ISI) of approved colour, shade on wall surface including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour,labour cess with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 20 | Wall painting two coats with any approved Distemper over a coat of primer including cost, conveyance ,taxes of all materials ,labours,T&P required for the cost of paint complete in all respect |
| 21 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6 mm thick glass of approved quality complete with frame shutters and all fittings and fixtures. |
| 22 | Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. |
| 23 | Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 24 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 Mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffinhg, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect. |
| 25 | Supplying, fitting & fixing of Vitrified Industrial tiles in floors of size 600mmx 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge (for New Work only ) |
| 26 | E.I Works: Recessed wiring to light points/fan points/Exhaust fan call bell point with 1.5 mm2 FRLS PVC Insulated SC multistrand copper conductor of ISI marked (Finolez/ Polcab/KEI/Anchor) with 20mm dia non-metalic PVC flexible conduit ( Make -AKJ/KINJAL/POLYCAB/ANCHOR) with 5/6 Amp, 250V modular switch ISI marked and ceeling rose of ISI marked (make Anchor- Roma Urban/ Legrand myrius/Schneider opale/ Crabtree Athena/L&T Engleze) Mounted an modular G.I. Box with modular base and cover of suitable size (Make Anchor-Roma Urban/Legrand myrius/ Schneider opale/Crabtree Athena/ L&T Engleze ), with 1.5 sq.mm FRLS PVC insulated single core multistrand Cu.conductor as earth wire including all accessories and connection. as per direction of Engineer-in-charge.( Make of wire Finolex/ L&T / Anchor /KEI/Polycab/V-guard) |
| 27 | Group-B. |
| 28 | Supplying and fixing suitable size Gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc.a srequired.( Make Anchor-Roma Urban/Legrand myrius/Schneider opale/ Crabtree Athena / L7T Engleze.) |
| 29 | Recessed wiring to submain in the following sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required .( Make of wire Finolex/ KEI/Polycab/ L&T /Anchor)2x2.5mm2 + 1x1.5 mm2. in 20 mm dia |
| 30 | 2x4 mm2+ 1x1.5mm2 in 20mm dia |
| 31 | 2x6 mm2 + 1x2.5 mm2 in 20 mm dia |
| 32 | Supply and fixing of three pole and neutral, sheet steel,MCB distribution , 415V on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB Knobs detachable gland plate, inter connections,phosphatized and powder painted including earthing etc. as required (But with out MCB/RCCB/Isolator) (Make-L& T/Legrand/Schneider/ ABB).4 Way Single Door. |
| 33 | Supply and fixing of 5Amp to 32 Amp rating 240V \\"C\\" series miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required . ( Make-Legrand /L&T/ Schneider).6 Amp rating to 32 Amp (SP) MCB. |
| 34 | 6 Amp rating to 32Amp (DP) MCB |
| 35 | S/F of 300 mm Exhaust fan (Anti-Dust) ( Make Usha / Khaitan). |
| 36 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose ( Make Anchor/ Cona). |
| 37 | S/F of 9 Wt. LED bulb (Philips / Panasonic / Havels ) make. |
| 38 | S/F. of 1x20 Wt. LED tube light fiting (Philips /Panasonic / Haves ) make. |
| 39 | S/F of 25 Wt. LED street light fittings complete with G.I Barcket (Philips/ Panasonic/Havels ) make. |
| 40 | P.H WORKS:Supplying all materials , labour , T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g F/cm ) on firming I.S 4985 of the following nomnal bore , tube fittings and clamps including making good the wall, ceiling and floor , testing all complete as per specification and direction of the Engineer-in-charge. 25mm dia PVC ASTM pipe (sch-80) Ground floor |
| 41 | 32mm dia PVC ASTM pipe (sch-80) roof top |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.20mm dia C-PVC PipesGround floor |
| 43 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 44 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 45 | 25mm dia brass full way valve (Shakti make) |
| 46 | Heallth Faucet |
| 47 | 15mm CP Extension piece |
| 48 | 125mm CP grating |
| 49 | 15mm size C.P. flange |
| 50 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.Ground floor |
| 51 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.Ground floor |
| 52 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make ) |
| 53 | 110mm U-PVC P Trap(Ori Plast/Finolex/Supreme Make) |
| 54 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 55 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 56 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 57 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 58 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 59 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral Por S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.SINGLE PIECE-WATER COLSET P TRAP - LYS-WHT-0204P |
| 60 | Grab bar (Jaquar make) WAC - WHT - BAI 090 |
| 61 | 450MM long Grab bar (Jquar make)AHS - CHR - 1507 |
| 62 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 63 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder |
| 64 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 65 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge ).Vitrified Tile Kajaria tiles 30x30cmGround Floor tile |
| 66 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ).Kajaria tile 40x25cmGround Floor wall |
| 67 | Providing fitting, fixing of Aluminium door with anodized AL. Flush door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender