Tender For L081-Pwd Road To Ragada_Road_Renewal Coat Of Sdbc With Wmm Profile Correction_1.890 To 5.490
Tender Value
51.42 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
51430
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for L081-Pwd Road To Ragada_Road_Renewal Coat Of Sdbc With Wmm Profile Correction_1.890 To 5.490
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegitation,grass,bushes,shurbs,saplings and trees grith up to 300 mm,removal of stumps of trees cut erlier and disposal of unsreviceable materials |
| 2 | Construction of Embankment with approved materials obtained from borrow pits with all lead and lifts,tranporting to site by mechanical means within a lead of 5 Km speading,grading to required slope compacting of table 300-2 & Clause 305 of MoRT & H Specification for Road & Bridge works(4th Revision) |
| 3 | Providin, laying, spreading & compacting graded stone aggregate to to Wet Mix Macadam specification including pre mixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface & compacting with vibratory roller to acieve the desired density as per clause 406 of MoSRT & H specifications for road & bridge works.(4th Revision) |
| 4 | Providing and Primer coat with bitumen Emulsion(S.S-1)using emulsion pressure distributer at the rate of 0.60 kg per Sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per MoRTH specification CL-503. |
| 5 | Providing and applying tack coat with bitumen emulsion(R.S-1) over prepared surface of granular base including cleaning of road surface using emulsion pressure distributer at the rate of 0.30 kg per Sqm with cost, conveyance, royalty, taxes and machineries required for the work complete as per specification and direction of the Engineer-in-Charge Over Granular base (3 Kg/10 Sqm) |
| 6 | Over BT Surface (2 Kg/10 Sqm) |
| 7 | Providing Surface dressing with 12 Kg penetration grade of bitumen and 0.15 Cum of 19 mm nominal size chips per Sqm & Rolling with PRR including hire & running charges of PRR but excluding cost and conveyance of chips. (To be used for minor repair works Units= Sqm) |
| 8 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. |
| 9 | Maintenance of road sinage |
| 10 | Clearing vents of CD works & restoration of CD works HPC (OLD & NEW) |
| 11 | White wasing two coats |
| 12 | Earth work in excavation in foundation in all kinds of soil within 50m intial lead and 1.5m intial lift including rough dressing |
| 13 | Filling foundation & plinth with Sand in layers not exceeding 23cm. thick |
| 14 | Cement Concrete(1:3:6) with 4cm size hard granite metal including cost,conveyance and royality of material etc complete. (a) Foundation |
| 15 | Sub-Structure |
| 16 | Providing weep holes in abutments and wingwalls 8mm x 23mm size including metal spall backing in rear complete.including centering and shuttering,if required. |
| 17 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 Ordinary Kilometer Stone (Precast) |
| 18 | 200 m stone (precast) |
| 19 | Construction of RCC guard posts of 250 mm dia M15 grade cast-in-situ with 20mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1608.2 (Precasted) |
| 20 | Providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 Sqm. as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD technical Specification Clause 300,800,1700 as per direction of the Engineer in charge (Inter mediate Board) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender