Tender For Structural Repairs & External Painting To The Pipe Rack Columns & Beams And Tower Foundations Of Xu-1, Xu-Ii & H2s Area And Civil Works At Other Area At Hwpm.
Tender Value
62.92 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
6 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadradri Kothagudem → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Structural Repairs & External Painting To The Pipe Rack Columns & Beams And Tower Foundations Of Xu-1, Xu-Ii & H2s Area And Civil Works At Other Area At Hwpm.
BOQ
| Sl. No. | Item Description |
| 1 | Providing all tools, tackles, labour, and material for Decoiling, straightening, cutting, bending,fixing and tieing in position Reinforcement bars with two strands of 18 gauge soft drawn annealed ms binding wire etc. all complete as per direction of Engineer-in charge. ( welding etc., if necessary) |
| 2 | Providing all tools, tackles, labour, and material for Providing scaffolding and shuttering using G.I.Pipe/ wooden shuttering wherever necessary and for making platforms etc. all complete as per direction of Engineer-in charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. 3. GI Scaffolding pipes will be issued to the agency on hire/rental basis. |
| 3 | Providing all tools tackles materials and applying average 15 mm thick plastering with rendering at all levels on columns, beams, RCC louvers and other areas with ready to use one part polymer modified cement mortar RENDROC S OR S2 of FOSROC CHEMICALS or equivalent, chipping out the loose concrete spallings, hacking the concrete surface for bonding ,surface preparation, applying Nito zink primer on exposed reinforcement and curing with Nito bond AR or equivalent of the concrete/ plastered areas as per manufacturers specifications. (NOTE desirable properites of the mortor will be high and early compressive strength, low permeability, and high resistance to chemical attack). (upto a height of 15m, scaffolding cost will be paid separately) as directed by the engineer in charge. |
| 4 | Providing and applying two or more coats of acrylic smooth exterior coating of Apex Ultima Suprema Weatherproof of M/s. Asian Paints / Excel of M/s. Nerolac / Heatshield of M/s. O.FIXIT / Weathershield Max of M/s. ICI Delux or other approved equivalent make and shade over the plain plastered surfaces/RCC columns and beams in XU-I, XU-II & H2S areas at all heights and as required, on concrete surfaces including surface preparation, filling up of holes and cracks with approved filling materials, applied @ 5 - 6 sq.m./ltr for two coats or as per manufactures specifications. over and including a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm), ensuring an interval of 4-6 hours for each successive coats etc. including necessary scaffolding and staging whereever required, insurance coverage to workers,tools, tackles ,safey appliances. PPE's complete as per the manufacturer's specification and as directed by the Engineer-in-Charge. |
| 5 | Supplying of Synthetic Rubber adhesive of M/s Pidilite / M/s. Dr. Fixit make or equivalent brand. It should be useful for Multiple Purpose like, laminating plywood, MDF, Particle board, block board; bonding leather fabric, Metal, Foil, different types of rubber all complete as per the directions of Engineer-in-charge. |
| 6 | Providing and applying Smartblok FG Epoxy Paint Coating of M/s JSW or other approved equivalent make in two or more coats over prepared concrete/plastered surfaces, after application of one coat of compatible epoxy primer, The surface shall be thoroughly prepared by cleaning and removing all dust, loose particles, oil, grease, laitance, and other contaminants, and by carrying out all necessary preparatory works . The epoxy coating shall be applied to achieve a minimum total Wet Film Thickness (WFT) of 100 microns for each coat, with an indicative coverage of 3–5 m² per litre per coat, including proper mixing, application, curing, and protection of the coated surface. The rate shall include the cost of all materials, primer, epoxy coating, labour, tools and tackles, equipment, handling, wastage, cleaning, and necessary to complete the work and as directed by the Engineer-in-Charge. |
| 7 | Surface dressing and levelling of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish within plant premises etc., all complete as per drawings, specifications and as directed by Engineer in charge. |
| 8 | Providing and laying Plain cement concrete of 1:2:3.5:9[1 cement,2sand,3.5 Fly ash, 9 stone aggregate] grade, with ACC/Ultratech/Birla A1 or any other approved cement using 40mm and down gauge crushed stone aggregate of approved quality in foundation and plinth, strom water drains, under floors, pavements, footings, pedestals etc. including centering and shuttering, spreading, leveling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 9 | Providing and laying in position specified grade of reinforced cement concrete,1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). make of ACC/ULTRATECH/BIRLA/JAYPEE cement grade of OPC-43, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete, laying at site, spreading and compacting mechanically by using needle and surface vibrator, centering, shuttering, finishing, curing by hassien cloth, carriage for all leads; but excluding the cost of reinforcement as per direction of the engineer-in-charge. The cement consumption for this item is 400Kg/Cum. If the curing has not done properly by using hassien cloth Rs.500 per Cum will be recovered from the bill. |
| 10 | Providing, hosting fixing at all level precast reinforced cement concrete works including the cost of required centering, shuttering but excluding cost of rienforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-II) : 3 graded stone aggregate 20 mm nominal size). make of ACC/ULTRATECH/BIRLA/JAYPEE cement grade of OPC-43, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete, laying at site, spreading and compacting mechanically by using needle and surface vibrator, curing by hessian cloth, carriage for all leads, but excluding cost of rienforcement as per direction of the engineer-in-charge. The cement consumption for this item is 400Kg/Cum. If the curing has not done properly by using hassien cloth Rs.500 per Cum will be recovered from the bill. |
| 11 | Providing, laying and fixing in position TMT reinforcement bars of TATA/VIZAG STEEL/SAIL/JINDAL for RCC works, including cost of supplying, cutting, bending, transporting, erecting, binding with 16 gauge MS annealed wire, cement mortar spacer blocks etc. complete as per specifications and as directed by the Engineer in charge. |
| 12 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position with the help of screws , applying a priming coat and finishing with enamel paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including preparation of surface, etc. with approval of approved structural steel of make (Tata/Jindal/SAIL) etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works all complete as per drawings, specifications and as directed by the Engineer. |
| 13 | Providing & fixing fly proof wire gauze (mesh) of Stainless steel (grade 304) made out of 0.5 mm dia wire and 1.4 mm aperture (both ways) to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts including cutting to size, two or more coats of enamel painting to MS flat, fixing to structural steel grill with C.P. brass / stainless steel screws etc. all complete as per the directions of Engineer-in-charge. |
| 14 | Repair of aluminium sliding window of size 1.50 m × 1.20 m having two sliding shutters, including removal of old/damaged gasket from the window glass and providing and fixing new gasket; removal of old/damaged rollers from the window shutters and providing and fixing new rollers; straightening and aligning the railing/guide track; cleaning and removing dust, dirt, debris, and other accumulated material from the shutter rolling track; testing for smooth operation; and making good the work complete in all respects, including all labour, materials, tools and tackles all complete as directed by the Engineer-in-Charge. |
| 15 | Providing 'HOE' (Excavator Cum Dozer) for miscellaneous works inside the plant boundary near ISG area, BCPP Building and exchange unit locations including all operational cost etc., as directed by the Engineer in Charge. |
| 16 | Supplying of Fly Proof Stainless steel wire guage mesh (Grade-304) aperture 1.4 mm and 0.50 mm dia. wire and all complete as per the directions of Engineer-in-charge. |
| 17 | Providing and laying Fly Ash brick masonry work with non modular bricks of size 230mm x 110mm x 75mm, fly ash lime bricks (FALG Bricks) conforming to IS:12894, having crushing strength not less than 10N/mm2 in CM 1:6 (1 cement : 6 coarse sand) at all heights including curing, scaffolding wherever required etc., complete all as per specifications and as directed by the Engineer in Charge. |
| 18 | Providing and laying 12 mm thick plaster in cement mortar 1:4 (one cement:four coarse sand) on brick masonry surface including surface finishing, scaffolding, curing etc.., all complete at all levels as per drawings, specifications and as directed by the Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender