Tender For Construction Of Rest Rooms For Industrial Employees And Cabins For Shop Floor In-Charges In Turret Shop-I & Ii And Construction Of 02 Nos. Of Toilet Blocks For Industrial Employees Of Turret Shop-I At T-72 Area, Hvf, Avadi
Tender Value
2.22 Crore
Estimated cost
Bid Submission
22 Sep 2026
6 days left
EMD
2.98 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Rest Rooms For Industrial Employees And Cabins For Shop Floor In-Charges In Turret Shop-I & Ii And Construction Of 02 Nos. Of Toilet Blocks For Industrial Employees Of Turret Shop-I At T-72 Area, Hvf, Avadi
BOQ
| Sl. No. | Item Description |
| 1 | Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance not exceeding 50 m and clearing site (girth exceeding 30 cm and not exceeding. 100cm) |
| 2 | Surface excavation in hard/ dense soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out. |
| 3 | Demolition of (unreinforced) cement Concrete of any description and in any position not otherwise specifically provided for |
| 4 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (reinforced) of any thickness. |
| 5 | Taken down window frame with shutter exc 1.5sq.m but not exc 4 sq.m and handing over the same to CE(STORES) |
| 6 | Cutting existing 40 or 50mm steel tubing for alterations or additions if necessarily done in position without taking down. |
| 7 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 8 | Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m |
| 9 | Excavating in hard/dense soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out. |
| 10 | Earth work excavation in trenches exceeding 1.5m and not exceeding 3.0 m in width and depth and getting out in hard/dense soil. |
| 11 | Material and labour for Quarry dust in foundation including watering and consolidation. |
| 12 | M & L for P.C.C 1:4:8, D2 type using 40mm graded aggregated in foundation, filling and mass concrete. |
| 13 | M & L for filling of moorum/red bajri in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering where directed. |
| 14 | M & L for providing RCC design mix M25 Concrete (1:1:2) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 15 | M & L for providing RCC design mix M25 Concrete (1:1:2) in Columns, pillars, piers, posts and struts |
| 16 | M & L for providing RCC design mix M25 Concrete (1:1:2) in Beams, cantilever bressummers, lintels over 1.5m span |
| 17 | M & L for providing RCC design mix M25 Concrete (1:1:2) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 18 | M & L for providing RCC M25 Concrete (1:1:2) in Chajjas |
| 19 | M & L for Formwork Flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair Finished surface. |
| 20 | M & L for Formwork Square/Rectangular sides of pillars, posts, struts, piers, columns and stanchions for fair Finished surface. |
| 21 | M & L for Formwork flat sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for fair Finished surface. |
| 22 | M & L for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for Fair Finished surface. |
| 23 | M & L for flat formwork to chullah hoods, chajjas, troughs and similar items including edges |
| 24 | Supply and Fixing of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 25 | Supply and fixing of mild steel reinforcement TMT bars 8mm dia to 6 mm dia, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 26 | M & L for Damp proof course in Cement concrete 1:2:4 B0 type, 40 mm thick to horizontal or vertical surfaces including necessary formwork. |
| 27 | M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built In cement mortar 1:6 |
| 28 | Material and labour for brick work built in CM 1:6 with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in. |
| 29 | Material & labour for plastering with CM(1:3) 12mm thick ceiling plastering. |
| 30 | M & L for plastering in CM 1:4, 15mm thick on fair faces of outer brick work or concrete surfaces. |
| 31 | M & L for plastering in CM 1:6, 15mm thick on fair faces of inner side brick work, concrete surfaces. |
| 32 | Material and labour for cement concrete 1:2:4 Type B1 20mm graded aggregate in foundation, filling and mass concrete. |
| 33 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 25mm thick for laying floor finishes. |
| 34 | S & F of Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Joint free non skid tiles and screed bed layer in cement mortar 1:4 15 mm thick layer floor finished. |
| 35 | S & F of coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 25mm thick for laying floor finishes. |
| 36 | Supply and fixing of Cement concrete Tiles 20cmx20cmx20mm thick with grey cement and pigment machine pressed with screed bed or bedding layer in CM 1:3 , 15mm thick and pointed in neat cement slurry in floors and cut polished. |
| 37 | M & L for 18mm thick granite (of any type) work (table rubbed and polished) in vertical surfaces in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 38 | M & L for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 39 | Providing edge moulding to 25 mm thick granite stone full nosing of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 40 | Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete. |
| 41 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls. |
| 42 | S & F of II class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed. |
| 43 | Supply & Fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 44 | S & F of 30mm thick main door design engraved factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood powder)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawal strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge |
| 45 | S & F of 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats |
| 46 | Supply and fixing factory-made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by E.IC. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 47 | Supply and fixing of Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 48 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 49 | S&F of 30mm thick factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood powder/rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawal strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge. |
| 50 | S & F of 5.5mm Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane as required and Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side. |
| 51 | S & F of 200mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed . |
| 52 | S & F of 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed . |
| 53 | S & F of 125mm butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type B-11 |
| 54 | S & F of 150mm Extruded aluminium alloy handles, fabricated type, anodised |
| 55 | S & F of 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 56 | Supply and fixing of 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor. |
| 57 | Supply and fixing of Door closer aluminium (extruded section) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed. |
| 58 | Supply and fixing of Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) |
| 59 | Supply and Fixing of Soap dish, vitreous China white, approximate size 160x160x90mm fixed to plugs with chromium plated brass screws |
| 60 | M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint including pink primer & preparing new wooden surfaces. |
| 61 | Material and labour for applying single coat of white cement based wall care putty in new walls and removal of existing treatment (Make shall be of JK white putty or Birla white wall care putty or suitably equivalent make) |
| 62 | Material and labour for white washing on ceiling with two coats on new ceiling surfaces. |
| 63 | Material and labour for applying two coats of Exterior emulsion on new External wall surfaces including preparation of surfaces and priming paint all complete. (MAKE:- ASIAN paint (Apex Ultima),NEROLAC(Excel Total) & BERGER(Weather coat long life 7 or suitably equivalent make). |
| 64 | Material and labour for applying two coat of oil bound distemper on internal wall surfaces (MAKE:- ASIAN, NEROLAC, BERGER or suitably equivalent make) |
| 65 | S & F of Looking Mirror of any size as required at site selected quality glass, mount on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass. |
| 66 | Material and labour for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 67 | Material and labour for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) |
| 68 | Material and labour for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. |
| 69 | Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SR (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. |
| 70 | M & L for Providing precast cement concrete B1 type 1:2:4 ( 20 mm graded aggregate)set in cm 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match but in landing, coverslabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 71 | Material and Labour for Forming jambs, etc. in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 72 | Supply and fixing of holdfast, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 73 | Returning, filling in hard/dense soil including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 74 | Removal of excavated soil exceeding 250m but not exceeding 500m and depositing where directed. |
| 75 | Removal of excavated hard materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed. |
| 76 | Excavating in post holes in hard/ dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. |
| 77 | S & F of Anodised aluminium frame for Partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing and Powder Coating etc. complete all as specified |
| 78 | M & L for 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work or Aluminium frame work |
| 79 | S & F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws and powder coating etc. complete all as specified. |
| 80 | Providing & fixing false ceiling at heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the engineer-in-Charge. (A) With Semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. |
| 81 | M & L for painting of steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer including preparing old surfaces. |
| 82 | Supply and fixing of Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 83 | Crimping the edges of the corrugated profile galvalume sheet 0.50mm (TCT) to form the crimp eaves as directed by the EIC. The profile shall be made as per the requirement at site. |
| 84 | Supply and fixing of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. |
| 85 | Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlin set manufactured out of minimum 0.75mm thick steel sheet as per design requirements. The Steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550Mpa) conforming to AISI specifications and IBC2009 for cold formed steel framing and construction and also as perIS:875-1987,ISO 800-1984 and IS:801-1975. The wind load shall be as per provisions of IS875(part-III). LGSFS frame shall be designed as per IS:801 using commercially available software such as Frame CADPro-11.7/STAADPRO- V8i/ArchiteKV2.5.16/Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps(to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L Shaped Angles for better structural stability. The framing section shall be cold form C type having minimum web 89mmx39mm flangex11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along center line of webs and shall be spaced minimum 250mm away from both ends of the member .The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self-drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTMB 633(13) or equivalent corrosion protection of gauge 10 & 12,TPI 16 and 8of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self-expanding carbon steel anchor bolt of dia as per approved drawings and design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above. |
| 86 | Material & labour for 5mm Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive |
| 87 | Supply and fixing of Fe410 E-250 Stairs (framed) including stringers, treads, landing, balusters, hand rails etc. including cleats, brackets, etc. complete |
| 88 | Material and labour for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar (Exc. half brick but not exc.one brick) |
| 89 | Supplying and laying of CPVC pipes 32 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 90 | Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 91 | S & F of Rotational moulded polyethylene water storage tanks Capacity in (1000)litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 92 | M & L of PVC(SWR) gully trap 125/110mm setting and jointing with solvent cement. |
| 93 | M & L of PVC (SWR) floor trap 75mm dia outlet of with grating including jointing with solvent cement etc., complete |
| 94 | S & F of PVC (SWR) 75mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floors. |
| 95 | S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in floor |
| 96 | S & F of PVC(SWR) junction single (Single T) equal or unequal with door 110mm dia any radius, |
| 97 | S & F for 110mm PVC (SWR) Vent cowl. |
| 98 | S & F of Gun-metal (32mm) , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 99 | S & F of 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) |
| 100 | Supply and fixing of Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) |
| 101 | S & F of vitreous china urinals, half stall type flat back of white including providing and fixing plugs, bedding urinals against wall in cement mortar 1:2, securing urinal back in cement. Including 32mm connector pipe, stop cock 15mm size with PTMT nuts 15mm PVC connections of length 300mm and waste coupling and removing old damaged urinal, 15mm dia pipe urinal spreader Minimum weight 60gms complete etc |
| 102 | S & F of 600 mm wide wash basin of polished 18 mm thick granite slab top, provide 200mm high front facia & band above the counter top of same shade of granite. All exposed surfaces of platform to be finished in same granite slab and all cut-out, exposed edges to be bull nosed with mirror polished. Also include making necessary cut-outs thru counter top. Cost also include drainage(32 mm waste fittings) pipes and raised platform 15 mm pillar taps, cast copper alloy, all complete and finished to satisfactory conditions. |
| 103 | Supply and Fixing of swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) |
| 104 | S & F of Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) |
| 105 | S & F of IWC Squatt pan (Orissa pattern) Size 580 x 440mm white / colour with integral foot rests providing lime concrete bedding and finishing the top and PVC valveless 10 litre, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets etc., |
| 106 | Supply of EWC with \\"P\\" or \\"S\\" trap including bedding valveless syphonic action type 10 litres flushing cistern, low level, white with inlet, ball valve, float and handle including brackets Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc., |
| 107 | Supply and fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 108 | S & F of 15 mm fancy type bib tap of bore dia 15 mm pipe standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105gms) |
| 109 | M & L for 225mm inner dia cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required |
| 110 | M & L for Concrete bed to drain pipes (150mm) PCC 1:3:6 Type C2 including packing under, and haunching against the sides of pipes after they are laid and tested |
| 111 | S & F of 150mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed as specified. |
| 112 | S & F of PVC(SWR) Bend with door 75 mm dia any radius & provided with access door |
| 113 | Supply and fixing of PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints fixed to walls |
| 114 | Supply and fixing of PVC (SWR) bends with door 110mm radius & provided with access door |
| 115 | Material and labour for Liquid water proofing compound. |
| 116 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. a)one light point or one fan point controlled by one switch with cables 1.5 sqmm size. |
| 117 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size. |
| 118 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall (made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. c)One 3 pin socket outlet 5 amps on independent with cables 2.5 sqmm size. |
| 119 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit. a) 2x2.5 sqmm + 1x2.5 sqmm earth wire |
| 120 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit. b) 2x4.0 sqmm + 1x4.0 sqmm earth wire |
| 121 | Material & Labour for connecting to the system modular type switches 6A single pole one way one module. (Make:,LEGRAND /ANCHOR/ Litaski/ Crabtree or Suitably equivalent make) |
| 122 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make) |
| 123 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (Make: Legrand/Havells/ Hager/ABB or Suitably equivalent make) |
| 124 | Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers |
| 125 | Supply and fixing ceiling fans complete with blades, down rods, electronic Regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star, rated Copper winding with brushless direct current motor (BLDC). (Make: HAVELLS/CGL/AUTOMBURG/LUKOR or suitable equivalent make as approved by EIC) |
| 126 | Supply and fixing of modular Fan step regulator, 120W - 2 module |
| 127 | Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240V (Make: Standard/Havels/Siemens/Legrand or suitably equivalent make) |
| 128 | Supply & fixing of 3 module modular white cover plate with frame |
| 129 | Supply & fixing of modular metal flush box for 3 module plate |
| 130 | Supply & fixing of 6 module modular white cover plate with frame |
| 131 | Supply & fixing of modular metal flush box for 6 module plate |
| 132 | Material & Labour for ceiling rose, 3 Phase/PVC/polycarbonate, isolated body. |
| 133 | Supply, fixing & connecting to the system of Sheet metal enclosures with double door DB's 415 V when MCB'S to be used triple pole & neutral 4 way(suitable for Incoming 4 pole MCB and outgoing 4 Nos of single pole MCB each phase) with 200 amps rated busbar, (Make: Legrand/Havells/ Hager/ABB or Suitably equivalent make) |
| 134 | Supply and fixing of SP 6 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (Make: ABB/Legrand/ Havells/Hager or Suitably equivalent make) |
| 135 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 32 AMP current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 136 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete (Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker or suitably equivalent make) |
| 137 | Materials & labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area cross-sectional area 25 sq. mm, 4 core |
| 138 | Demolition of cement concrete (unreinforced) of any description and in any position |
| 139 | Material and labour for cement concrete 1:2:4 Type B1 using 20mm graded aggregate in foundations, filling and mass concrete |
| 140 | Excavating in trenches in soft/ loose soil not exc 1.5 m wide and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out |
| 141 | Material & Labour for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 32 x 6mm GI strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including earth electrode pipe, Funnel, charcoal, salt, earth PCC pit with cover and testing on completion |
| 142 | Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip . |
| 143 | Material and labour for Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground |
| 144 | Material and labour for Brick walls cutting chases, pining in, making good to facing where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good, cutting exc. 10 cm but not exc. 20 cm girth. |
| 145 | Material and labour for Brick walls cutting built in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete exceeding 400 sq.cm but not exc 0.10 sq.m. |
| 146 | Supply, fixing & connecting to the system of sheet metal enclosures with double door DBs 240 V when MCB s to be used single pole & neutral ,4 way with 200 amps rated busbar,. (Make: Legrand/Havells/Hager/ABB or suitable equivalent make). |
| 147 | Supply and fixing amp rating 240V 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP current carrying capacity, in the MCB DB complete with connection testing and commissioning. (Make: Legrand/Anchor/Havells or suitably equivalent make) |
| 148 | Material and labour of PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 x 300 x 50 mm deep |
| 149 | Material & Labour for Switch piano, flush type single pole, one way 6 Amp (Make: Anchor/ Havells/ Legrand or suitably equivalent make) |
| 150 | Material & Labour for Switch piano, flush type single pole, one way 16 Amp (Make: Anchor/ Havells/ Legrand or suitable equivalent make) |
| 151 | Supply and fixing of exhaust fan, suitable for UPVC window,200 mm, BLDC motor , 20 w, low noise,1600 RPM , Rust proof body AC single phase 230 V heavy duty with blades and frame and louvers (Make: Almonard / Havells / Crompton/Bajaj/Atomberg or Suitably equivalent make) |
| 152 | Material & Labour for LT cable end termination with gland and copper lugs suitable for 4 core 25 sqmm XLPE cable. |
| 153 | Supply & Fixing of 12 module, polycarbonate modular white cover plate with frame and metal flush box. (Make: Anchor/Havells/Legrand or suitably equivalent make) |
| 154 | Supply & Fixing of modular type Dummy plate. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender