Tender For Miscellaneous Civil Works In Med Building, Cel Sahibabad
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
35000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Miscellaneous Civil Works In Med Building, Cel Sahibabad
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including GI profile sheets, asbestos cement sheets including turbo ventilators, ridges, hips, valleys, gutters, MS pipes/angles/ channels and required scaffoldings etc. for height of approx. upto 7m and stacking the material within 50 metres lead of: G.I./G.S. Sheet |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet |
| 3 | Dismantling doors, MS windows, clerestory windows, MS rolling shutter, MS collapsible sliding gate (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. metres |
| 4 | Dismantling steel work manually/ by mechanical means in built up sections including trusses, rafters, purlins etc. of steel work without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. |
| 5 | Providing and fixing heavy duty precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 1 mm (+ 0.05 %) total coated thickness with zinc coating 250 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of min. size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, scaffolding etc. for installation at height approx. upto 5m. (Make of profile sheets: Jindal/Essar stuts Ltd./Tata blue scope.) |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | CEMENT PLASTER (IN COARSE SAND): 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, scaffolding etc. for installation at height approx. upto 7m. (Make of profile sheets: Jindal /Essar stuts Ltd./Tata blue scope.) |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes (Make:- TATA/Jindal/SAIL) |
| 11 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,all necessary fittings such as heavy duty hinges, tower bolts, L-drops etc. complete in all respect, including applying a priming coat of approved steel primer.Using MS angles 40x40x6 for diagonal braces and as per requirement. |
| 12 | Providing and fixing M.S. grills of required pattern in frames of windows etc. including M.S. flats, square or round bars, MS angles for frame of size min. 35mm x 35mm x 5mm etc. including welding, fabricating, priming coat with approved steel primer all complete. Fixed to openings etc. |
| 13 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 14 | Providing and fixing of 2mm thick homogeneous PVC vinyl flooring with fevicol SR 998 adhesive including thermo welding of joints of PVC vinyl flooring with same color cord with automatic thermo gun all complete as per the direction of engineer in charge. (Make:Wonderfloor,Vinyl Flooring/Polyflor.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender