Tender For Renovation/Repair To Gents And Ladies Change/Rest Room, Toilets Of U-05, U-10 And 4-Storage Sheds Inside Factory.
Tender Value
77.68 Lakhs
Estimated cost
Bid Submission
05 Oct 2026
22 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balangir → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation/Repair To Gents And Ladies Change/Rest Room, Toilets Of U-05, U-10 And 4-Storage Sheds Inside Factory.
BOQ
| Sl. No. | Item Description |
| 1 | Renovation/repair to gents and ladies change/rest room, toilets of U-05, U-10 and 4-Storage sheds inside factory |
| 2 | Surface dressing n exc 15 cm deep in Soft/loose soil. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil. |
| 4 | Excavating over areas, exc 1.5 m deep and getting out Soft/loose soil. |
| 5 | Removing excavated material (soil ) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. |
| 6 | M & L for sand filling under floors or in foundations including watering and consolidation. |
| 7 | M & L for providing cement concrete in foundations, filling and mass concrete type C2 (1:3:6) with 40mm graded aggregate. |
| 8 | M & L for P.C.C Type-I Grade M15 (1:2:4 ) mix using 20 mm graded aggregate. |
| 9 | M & L for RCC (nominal mix) in type B1(1:2:4) with 20 mm graded aggregate in foundations, including rafts,footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass. |
| 10 | M & L for RCC (nominal mix) in type B1(1:2:4) with 20 mm graded aggregate in columns, pillars, piers, posts and struts. |
| 11 | M & L for RCC (nominal mix) in type B1(1:2:4) with 20 mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 12 | M&L for brickwork with fly ash modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 as directed. |
| 13 | M & L for rendering 12 mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) . |
| 14 | M & L for formwork to sides of rough finished flat surfaces of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. |
| 15 | M & L for formwork to sides and soffits of floor or roof beams, beam aunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. |
| 16 | M&L for formwork to sides of rough finished flat surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings lintel, chajja etc and similar work, not exceeding 200mm thick (Horizontal or sloping). |
| 17 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 18 | M & L for providing precast cement concrete set in cement mortar 1:4 type-B1 1:2:4 with 20mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 19 | M & L for aggregate for loose filling broken bricks of gauge 80mm to 150mm graded. |
| 20 | M & L for 200mm reinforced concrete pipes, class NP2, laid and jointed complete with collars as per the site condition. |
| 21 | M&L for concrete bed to drain pipes of 200mm pipe including packing under, and haunching against the sides of pipes in cement concrete of type C2 (1:3:6) after they are laid and tested. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 23 | Supply of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding. |
| 24 | S & F of cast iron 100mm taps ‘P’ or ‘S’. |
| 25 | PVC 10 litres valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 26 | S & F of vitreous China squatting plate urinal of white colour (excluding flushing cistern, flush pipe and waste pipe) all complete as per site requirement. |
| 27 | S & F of vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing with flushing cistern/pipe. |
| 28 | S & F of vitreous China wash basin, white, flat back, size 450x300mm,irun excluding taps, waste, chain and plug and pocelain stopper but including brackets and fixing of Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe . |
| 29 | S & F PVC connections 15mm size with PTMT nuts of length 300mm. |
| 30 | S & F of 15 mm pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight15mm-120gms). ((Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo). |
| 31 | S & F of 15mm stop valves, of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) (Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo). |
| 32 | S & F of grating doom 125mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 33 | S & F of tubes, medium grade, 20mm dia galvanised, with all fitting, laid in trenches all complete. |
| 34 | S & F of tubes, medium grade, 15mm dia galvanised, with all fitting, laid in trenches all complete . |
| 35 | S & F of 100 mm bore cast iron bends(any radius, diminishing pieces or tapers (larger bore measured). |
| 36 | S & F of 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4). |
| 37 | M & L for salt-glazed stoneware gully traps, square or round mouthed, type 'P' of size 125x100 mm. |
| 38 | S & F of 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. |
| 39 | S & F of 15mm fancy type bib taps, standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-105gms) (Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo). |
| 40 | S & F of rotational moulded polyethylene water storage tanks 500litres capacity (cylindrical vertical with closed top) hoisted and fixed in position , capacity-500liters, colour-white, 6 layer, conforming to IS:12701 or latest . (Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo). |
| 41 | S & F of towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws andwooden/plastic cleats. Minimum weight 190gms) |
| 42 | S & F of push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms, Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo). . |
| 43 | S & F of 32/40mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms) for wash basin and urinal. |
| 44 | S & F of 32mm bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/40mm-270 gms, (Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo) |
| 45 | S & F of 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 46 | S & F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . |
| 47 | S & F of 100mm cast iron cowls . |
| 48 | S & F of Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms, (Make : Prayag, Vectus, Jindal plast, Jal, APL Apollo) |
| 49 | Cutting or uprooting grass and removing old damaged tarfelt etc, removing rubbish off the premises, cleaning surface and preparing to receive new plaster. |
| 50 | M & L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3. |
| 51 | M & L for brushing neat cement sluarry with 3.0 kg of cement per sqm. |
| 52 | M & L for providing screed bed or bedding layer of mortar 15mm thick even and smooth surface in cement mortar 1:3 for base of water proofing treatment. |
| 53 | M & L for providing liquid water proofing compound on cement motar. (Make : Dr. Fix it or equivalent material). |
| 54 | Providing and laying APP (Atactic Polypropylene Polymer) based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface byforced application complete all as specified . The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane (Test certificate of APP and bitumen primer to be produced separately). |
| 55 | Providing and laying vitrified tiles in floor (Size of tile 600 x 600 mm) (thickness 8mm or more), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints etc. and shifting or removing of office tables, chairs, almiras, computers and any type of office furniture for carrying out the work and to restore the same after completion of the work (Make: Johnson /Kajaria/Somany). |
| 56 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for. |
| 57 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc . |
| 58 | M & L for providing screed bed or bedding layer of cement mortar (1:4) 20mm thick for laying floor finishes (For Non skid tiles). |
| 59 | M & L for providing non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. (Make: Johnson /Kajaria/Somany) |
| 60 | M & L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match .(Make: Johnson /Kajaria/Somany) |
| 61 | Dismantling of wrought iron window or mild steel work of any description and deposited to store . |
| 62 | S & F of powder coated any colour (powder coating of minimum thickness 50 micron) anodised aluminium frame two track for windows, with one or more rebates including joining cleat for fixing, provision of PVC protected sheeting and its removal after fixing the frame work and complete all as specified in MES SSR Part- I. Make HINDALCO/INDALCO/JINDAL. |
| 63 | S & F of powder coated any colour (powder coating of minimum thickness 50 micron) anodised aluminium window and ventilator shutters, fixed/ sliding type rolled on three track, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, aluminium hard ware etc. and anodised aluminium snap on beading for fixing glass panes in frames complete all as specified in MES SSR part-I, clause No. 10.37. Make HINDALCO/ INDALCO /JINDAL. |
| 64 | S & F of sheet glass, 4.8mm thick ordinary quality, in squares exc 0.5 sq. m each pane for aluminium shutter . |
| 65 | S & F of 125 mm butt hinges, heavy weight, cold rolled mild steel, and fixed. |
| 66 | S & F of aluminium anodised, barrel tower bolts of extruded section and fixed. (Length of bolt:150 mm). |
| 67 | S & F of extruded aluminium alloy handles, fabricated type, anodised (Size of handle 150 mm for door). |
| 68 | S & F of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed (Length of bolt 300 mm). |
| 69 | M & L for preparation of surfaces plastered or unplastred old surfaces on walls and applying two coats of distemper oil emulsion . |
| 70 | M & L for preparation of old painted cement surfaces of any description over 10cm girth or width, not otherwise described and appyling two coat of synthetic enamel paint. |
| 71 | M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces. |
| 72 | S & F of factory made single extruded WPC (Wood Polymer Composite) door frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (Max. toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screwes having mim. frame dencity of 750kg/cum, screw withdral strength of 2200N (Face) & 1100N (Edge), min. comprensuive strenghth of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and lenght complete. |
| 73 | S & F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K Value 58-60 (Suspension grade), calcium carbonate and natural fibers, (wood powder/rice husk/wheat husk) and non toxic additives (Max. toxicity index of 12 for 100gms) having max. density of 650kg/cum and screw withdral strength of 1800N (Face) & 900N (Edge), min. comprensuive strenghth of 50N/mm2, modules of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screws, etc. all complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysOct 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender