Tender For Special Repair And Other Civil Work In Type-Ii & Iii Staff Quarters At Mw Compound, Dimoria, Nagaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Sep 2026
4 days left
EMD
9952
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagaon → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair And Other Civil Work In Type-Ii & Iii Staff Quarters At Mw Compound, Dimoria, Nagaon.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | (a) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 4 | (a) Of area beyond 3 sq. metres |
| 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 7 | Felling Pipal trees from building terraces, walls, etc. by cutting the stem as deep as possible & removing the roots by applying salt vinegar, herbicide like Tordon, etc. as per the direction of the Engineer in charge. |
| 8 | (a) Girth of tree up to 100mm |
| 9 | (b) Girth of a tree above 100mm upto 200mm |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 11 | (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 13 | (a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 15 | (a) Local Hard Wood. |
| 16 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling shutters 25 mm to 40 mm thick, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) |
| 17 | (a) 35 mm thick shutters of local hard wood. |
| 18 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 19 | (a) 100x58x1.90 mm |
| 20 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 21 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 22 | (a) 30 mm thick plain PVC door shutters |
| 23 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 24 | (a) 300x16 mm. |
| 25 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 26 | (a)250x10mm |
| 27 | (b) 200x10 mm |
| 28 | (c) 150x10 mm |
| 29 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 30 | (a)125 mm |
| 31 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 32 | (a)Twin rubber stopper |
| 33 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 34 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 35 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 36 | Deduct for not using 20 mm thisk cement mortar 1:4 (1 cement: 4 coarse sand) bedding in laying of floor tiles and joining with grey cement slurry @ 3.3 kg/ sqm. |
| 37 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set the adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. |
| 39 | (a) 75 mm diameter |
| 40 | (a) 110 mm diameter |
| 41 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 42 | (a) Single tee with door. |
| 43 | (i) 75x75x75 mm |
| 44 | (ii) 110x110x110 mm |
| 45 | (b) Single tee without door |
| 46 | (i) 75x75x75 mm |
| 47 | (ii) 110x110x110 mm |
| 48 | (c)Bend 87.5° |
| 49 | (i) 75 mm bend |
| 50 | (ii) 110 mm bend |
| 51 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 52 | (a) 110 mm |
| 53 | 12 mm cement plaster of mix : |
| 54 | (a) 1:6 (1 cement: 6 fine sand) |
| 55 | 6 mm cement plaster of mix : |
| 56 | (a) 1:3 (1 cement : 3 fine sand) |
| 57 | Extre for providing and mixing water proofing material in cement plaster work in proportion recommanded by manufacturers. |
| 58 | White washing with lime to give an even shade: |
| 59 | (a) New work (three or more coats) |
| 60 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 61 | (a) One coat. |
| 62 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 63 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 64 | (a) One or more coats on old work. |
| 65 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 66 | (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 67 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 68 | (a) W.C. pan with ISI marked white solid plastic seat and lid |
| 69 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 70 | (a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 71 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 72 | 470x420 mm bowl depth 178 mm. |
| 73 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a) Flexible pipe |
| 74 | (i) 32 mm dia |
| 75 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 76 | 10 litre capacity - White |
| 77 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 78 | (a) Rectangular shape 453x357 mm |
| 79 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 80 | Providing and fixing C P Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 81 | (a) 600 mm long towel rail . |
| 82 | Providing and fixing unplasticised PVC water pipe with sockets conforming to IS-4985-1988 including jointing with solvent cement (rates inclusive of bends,tees other fixtures complete.)(external works) |
| 83 | (a) 15mm nominal outer dia. (pressure class of 6 kg/sqcm) |
| 84 | (b) 20mm nominal outer dia. (pressure class of 6 kg/sqcm) |
| 85 | (c) 25mm nominal outer dia. (pressure class of 6 kg/sqcm) |
| 86 | (d) 32mm nominal outer dia. (pressure class of 6 kg/sqcm) |
| 87 | Providing and fixing uplasticised PVC connection pipe with brass unions : (a) 45 cm length. |
| 88 | (i) 15 mm nominal bore. |
| 89 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 90 | (a) 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 91 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 92 | (a) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 93 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 94 | (a) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 95 | Providing and fixing PTMT grating of approved quality and colour. |
| 96 | (a) Circular type. (i) 100mm nominal bore |
| 97 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 98 | (a) 50 mm average thickness |
| 99 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 100 | (a) Bars upto 12 mm diameter |
| 101 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 102 | (a) SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. |
| 103 | Providing and applying roof seal Dr. Reddy for waterproofing treatment over roof terrace including side parapet wall atleast two or more coats as recommended by the manufacturer’s specification over dry surface by cleaning such as free from dust, dirt, derbis, oil etc. This application shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. |
| 104 | Credit for C.I. pipes including jointing fittings as per direction of Engineer -in-Charge. |
| 105 | Credit for 35mm thick flush door up to 2.00 sqm. |
| 106 | Credit for G.I. water supply pipes up to 25mm nominal bore. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender