Tender For Repair & Renovation Of Various Residential Buildings Under Division No.-Iii, Shimla (Sh:-Providing & Fixing Wooden Cupboards , Laying Tiles In Bedrooms Of Nmh-2,Providing Tissue Curtains,Carpet & Footmats At New Minister House 2 & Providin
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Sep 2026
2 days left
EMD
9180
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Various Residential Buildings Under Division No.-Iii, Shimla (Sh:-Providing & Fixing Wooden Cupboards , Laying Tiles In Bedrooms Of Nmh-2,Providing Tissue Curtains,Carpet & Footmats At New Minister House 2 & Providing & Fixing Curtains & Wallpapers At New Minister House 2 In Benmore Section Under Benmore Sub Division )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 2 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 3 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 4 | Providing and fixing plain square edged cover fillets (beading) 60mmx12mm section with wood screws in ceiling and lining including mitring at junctions. 2nd class D/dar wood. including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 5 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :100mm. |
| 6 | Providing and fixing 1.0 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
| 7 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 8 | Providing and laying vitrified floor tiles matt finished with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm. |
| 9 | Providing and fixing white vitreous china pedestal type water closet (European type) with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid. including carriage of materials within all leads and lifts |
| 10 | Providing and fixing 8 mm dia hand Jet jenus with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 11 | Providing and fixing vitreous china (CERA) wash basin with padastal 550x400mm cat no. S2040105 wash basin pad. S2090101 including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 12 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the anufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm includ |
| 13 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge:- (i)110 mm dia |
| 15 | Providing & Fixing 110mm nominal size PVC finolex plain bend ISI marked complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 16 | Providing & Fixing pvc coller 110 mm ISI marked complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 17 | Providing & Fixing Floor Trap 110 x 75 mm ISI marked complete including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 18 | Providing and fixing wall ceiling floor CPVC pipe (heavy duty) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials within all leads and lifts. 15mm nominal bore |
| 19 | Providing and fixing 15mm thick single hole basin mixer of approved quality including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 20 | Providing and fixing ESSCO wall mixer without telephonic arrangement of approved qualityincluding carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 21 | Providing and fixing ESS-ESS Bib cock with flange of approved quality 15mm nominal bore including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge Cat no. T-103D |
| 22 | Providing and fixing 15mm dia C.P.brass angle cock including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 23 | Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. screws and washer including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 24 | Providing and fixing Ess-Ess Towel ring complete with Brass brackets fixed to wooden plugs with screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge. Of Cat no.-SQTW201 |
| 25 | Providing and fixing Acrylic corner shelf 3in 1 with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screwsincluding carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 26 | Providing and fixing Ess-Ess Soap dish complete with brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge . Cat no.AC-103 |
| 27 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 28 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work (One or more coats) over and including water thinnable priming coat with cement primer |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 30 | Providing and fixing vitreous china (CERA) Single piece EWC with slim soft close seat cover and fittings size 685x360x720mm cat no.S1013164 including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 31 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) 1st class Teak wood wood 45 mm thick shutters.including carriage of materials within all leads and lifts complete as per the direction of the Engineer-in-Charge |
| 32 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 33 | Providing and fixing tissue curtain of superior quality D-Décor cloth complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge 2.10 metre to 2.40 metre |
| 34 | Providing & Placing woolen acrylic carpets 12 mm pile height 100 % acrylic 2 ply xasn synthetic latex compound heavy guiding complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge |
| 35 | Providing & Placing PVC backing RIBBED mats 3'x2' complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge |
| 36 | Providing & Placing PVC backing RIBBED mats 90'' x 17\\" complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge |
| 37 | Providing & Placing PVC backing PVC coir 18\\" x 30 \\" complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge |
| 38 | Providing and fixing curtain of superior quality of D-Décor with eight nos. eye lid with steaching and 30 cm top and bottom fold of size 2.10 to 2.4 metre complete including carriage of materials in all leads and lifts as per direction of Engineer-in-Charge |
| 39 | Providing and fixing at site 3-D Wallpaper of superior quality including fixing with approved adhesieve including carriage of materials with in all leads and lifts as per direction of Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender