Tender For Special Repair Of Watch Towers At Marcos (Svp) Under Ge Minniebay, Sri Vijaya Puram (8885/E8)
Tender Value
47.50 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Watch Towers At Marcos (Svp) Under Ge Minniebay, Sri Vijaya Puram (8885/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.11 sqm but n.exc 0.18 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 3 | M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) all as specified and directed |
| 4 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.18 sqm but n.exc 0.38 sqm area of each tiles in floor/ steps etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 5 | M&L for Coloured Non-skid/matt finish Ceramic tiles 7 to 8 mm thick exc. 0.18 sqm but n.exc 0.38 sqm area of each tiles in in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match as in floor over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 6 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 7 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified. |
| 8 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 9 | M & L for rendering 5 mm thick in cement mortar 1:4 mixed with water proofing compound over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair complete all as specified and as directed. |
| 10 | Supply only liquid water proofing compound. |
| 11 | M&L for rendering 10mm thick plaster in CM (1:6) on brick/block or concrete surfaces finished even & smooth complete all as specified and as directed. |
| 12 | M&L rendering 5mm thick in CM (1:3) on ceiling surfaces finished even & smooth without using extra cement complete all as specified and as directed. |
| 13 | M&L preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and including applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 14 | M & L for preparation of new surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion of apex ultima paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 15 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 16 | Dismantling boarding, any description, fixed in any position with nails ® as per specifications and drawing. |
| 17 | S&F for aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire suspenders at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including Gypsum Based PVC Laminated board 8 thick not exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid complete all as specified and directed by Engineer-in-Charge. Make- Gyproc, Ramco or equivalent |
| 18 | Demolition of cement concrete including tiles and mortar of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 19 | Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 20 | Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) 75mm thick as in path /hard standing/plinth protection with finished surfaces even and smooth without using extra cement complete all as specified and directed. |
| 21 | S & F Mild Steel work as in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161, Grade YST - 240, Medium Grade of any dia complete all as specified and as directed. |
| 22 | Dismantling of plain or corrugated steel sheeting any guage thickness or similar pattern roof coverings complete all as specified and as directed. |
| 23 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction and as directed. |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 25 | M & L aluminium wind tie of any size fixed with self tapping screws of size 50/75mm with integral EPDM washer in roof covering complete all as specified and as directed. |
| 26 | Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 27 | M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and as directed. |
| 28 | Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & grill (if fixed) without taking off shutters from the frame). |
| 29 | Providing and fixing Factory made single rebate WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete in colour as per direction of Engineer-in-Charge. |
| 30 | Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 31 | S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 including srews complete all as specified and as directed. |
| 32 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed. |
| 33 | S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed. |
| 34 | S&F repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 35 | S & F in repairs Floor Door Stopper of size 70-100 mm of aluminium alloy body and tongue, anodised, with rubber cap complete all as specified and as directed. |
| 36 | Taking down chowkats or frames exceeding 1.5 sq.m and not exceeding 4 sqm each with shutters without taking off shutters from the frames and removing off site etc complete all as specified and as directed. |
| 37 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 38 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 39 | Supply only sheet glass, 4.8 mm ordinary quality and glazing with oil putty in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed |
| 40 | Supply only 5.0 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane complete all as specified and as directed |
| 41 | Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed |
| 42 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. |
| 43 | M&L for preparation of old surfaces of wall and applying one coat of oil emulsion distemper, complete all as specified and as directed. |
| 44 | M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in roof kerb,apex stones,bed plates etc complete all as specified and as directed |
| 45 | M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 46 | Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 20mm including taking down complete all as specified and directed. |
| 47 | Supplying and Laying in repair CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with outer dia 25mm including taking down complete all as specified and directed. |
| 48 | Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 49 | Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 50 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and directed. |
| 51 | Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed. |
| 52 | Supply and fixing 25 mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and directed. |
| 53 | Supply and fixing 25 mm outer dia tank Adaptor complete all as specified and directed. |
| 54 | Supply and fixing 20mm outer dia union complete all as specified and directed. |
| 55 | Supply and fixing 25 mm outer dia union complete all as specified and directed. |
| 56 | Supply and fixing 20 mm outer dia Brass Tee complete all as specified and directed. |
| 57 | Supply and fixing 25 mm outer dia Brass Tee complete all as specified and directed. |
| 58 | S&F in repairs 25 mm CPVC ball valves fiitings to cpvc pipe complete all as specified and as directed. |
| 59 | S & F in repair 50mm PVC pipe laid in floor or wall with fitting complete all as specified and as directed. |
| 60 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 61 | Supply only PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 62 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 63 | Supply and fixing in repair 10 litre capacity PVC low level valve less syphonic action type flushing cistern, white, with inlet, ball valve, float and handle including brackets, and bends complete all as specified and as directed. |
| 64 | S&F in repairs 600mm x 450mm mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood fixed to wooden plugs with chromium plate brass screws and cup washers complete all as specified and directed. |
| 65 | S&F in repairs tubular towel rail of 20mm dia of 60cm in length, D shaped bracket brass chromium plated including brackets complete all as specified and directed. |
| 66 | S&F in repairs, 15mm CP 2 Way Bib Cock heavy duty all as specified and directed |
| 67 | S&F in repair 100 mm dia CP grating incl joints with solvent cement complete all as specified and directed. |
| 68 | S & F 32 mm (Dia of discharge pipe) Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 69 | S&F in repairs PVC flexible waste pipe of 32 /40 mm for wash hand basin and Kitchen sink complete all as specified and directed. |
| 70 | S & F in repair Bib Taps with flange, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 71 | S&F in repairs stop valves/angle valve cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed. |
| 72 | S&F brass chromium plated telescopic Hand shower(Health Faucet) (ABS Body) with 1 Meter long Easy Flex Tube in Chrome Finish& wall Hook complete all as specified and directed. |
| 73 | S & F in repairs Pillar Taps, cast copper alloy, Chromium Plated, Fancy Type, 15 mm dia, with capstan head, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 74 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed. |
| 75 | S & F rotational moulded polyethylene water storage tanks 1000 Ltr (cylindrical vertical with closed top) UV protected anti bacteria coating with threaded cover hoisted and fixed in position including dismantling old tank complete all as specified in SSR Part IMake : Vectus-Smart, Prince -Store fit or equivalent |
| 76 | S&F in repair 25 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed |
| 77 | S & F in repair Gun-metal, globe or gate valves, 25 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 78 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 79 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender