Tender For Construction Of Retaining Wall Near Bldg No P-106 At Marcos (Svp), Provn Of Grills To Windows In P-238 (Otm) Static Wksp Eme Under Age B&R-Ii And Provn 25 X Steel Open Rack For Storage Of Spares Of Static Wksp Eme Under Ge Minniebay, Sri V
Tender Value
48 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
17 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Retaining Wall Near Bldg No P-106 At Marcos (Svp), Provn Of Grills To Windows In P-238 (Otm) Static Wksp Eme Under Age B&R-Ii And Provn 25 X Steel Open Rack For Storage Of Spares Of Static Wksp Eme Under Ge Minniebay, Sri Vijaya Puram (8890/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas n exc 1.5 m in depth; for foundation, etc. and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation over areas exc 1.5 m in depth but n.exc 3.00 depth for foundation, etc. and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil. Complete all as specified. |
| 4 | M & L for PCC 1:4:8 with type D2 using 40 mm graded crushed stone aggregate as in filling, foundation and mass concrete complete all as specified and as directed. |
| 5 | M&L for nominal mix RCC M-30 (using 20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed |
| 6 | M&L for nominal mix RCC M-30 (using 20mm graded stone aggregate) in Walls, retaining walls,basement walls, ballast walls and the like; anythickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed |
| 7 | M&L for use and waste form work to sides of concrete foundations, footings, rafts, and raft beams sides and soffit of foundations and plinth beam and similar work for flat rough finished surface all as specified |
| 8 | M&L for use and waste form work to faces of walls retaining walls, abutments, parapets and like for flat rough finishesd surface all as specified |
| 9 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 10 | M&L for 110 mm bore PVC pipes as in weep holes all as specified. |
| 11 | M&L for broken stone or boulders including hand packing (any thickness) at back side of weep holes and raising or lowering to the required level all as specified. |
| 12 | Return filling in Surplus soil, back filling of retaining wall including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified. |
| 13 | Removing excavated soil exc 50 m but n.exc 250 m and depositing where directed at level n.exc 1.50 m above the atarting point complete all as directed. |
| 14 | M&L Precast cement concrete block masonry type C1 1:3:6 (20mm graded agg) with solid block exc 10cm in width and setting in CM 1:6 specified and as directed. |
| 15 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces and finishing the top surface even and fair without using extra cement complete all as specified and as directed. |
| 16 | M & L preparation of newly surfaces of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 17 | M & L for providing cement concrete with type B1 (20 mm graded stone aggregate) as in drain / coping etc complete all as specifed and directed. |
| 18 | S&F Framed work such as grills, gratings gates, etc., with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 19 | M&L for preparing new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 20 | M&L for preparing new steel or iron surfaces of any description over n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of floor or the side of waist slab with suitable arrangement etc., complete all as specified and as directed. Note :- Considered for railing on balcony / staircase portion at any position. |
| 22 | Rack adjustable 6 tier steel :- The entire rack shall be made of 1mm mild steel sheet, the sides shall be provided with 40 x 40 x 4mm angle iron welded to 1.00mm thick MS sheet 75 x75 x 3mm thick flat iron cut to shape shall be welded at front corner and all partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. All dimensions, shape and size shall be followed as per drg, all joints, fixing shall be done in accordance with standard specifications and rest all as shown on drg. Finishing :- All steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey hammer paint internally and externally with spray machine after preparation of surfaces. Painting shall be done with spray machine and rest all per drg. Dimension : Overall size shall be 915mm long, 610mm wide and 1905mm high. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender