Tender For Special Repair To Servant Quarters Of Certain Sos Married Accommodation At Dssc Wellington
Tender Value
43 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
8 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Servant Quarters Of Certain Sos Married Accommodation At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris off the site complete all as specified and directed. |
| 2 | Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for Coloured non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 4 | M&L for Coloured non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and etc set and jointed in neat cement slurry and pointed in white or coloured cement to match vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 5 | M&L for coloured glazed ceramic tiles of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 8 | Taking down Shutters of any descriptionexc 1 sq. m but n.exc 2 Sqm each complete all as specified and directed. |
| 9 | S&F Pressed steel frames of 1mm thick factory made of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed. |
| 10 | Supply and fix factory made 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type Decorative face on both sides with lipping to match with frame and fitted to chowkats etc., complete all as specified and directed. |
| 11 | M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 12 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing & edges will be painted to match with printed sheet complete all as specified and directed. |
| 13 | Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading., and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 14 | M&L PCC type B-0 (1:3:6) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed. |
| 15 | S&F Mild steel butt hinges 100mm long,medium weight, cold rolled complete all as specified and directed. |
| 16 | S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 17 | S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed. |
| 18 | S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed. |
| 19 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 21 | Supply and fix Aluminium powder coated sliding widnow with appropriate frame section(with three track) including two glazed and one mesh window shiutters with 5mm thick plain glass and including on shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.The details of window section shall be as follows 1) Window bottom track(for glazed window) frame shall be of 31.75mmx 61.60mmx 1.2 mm and top track frame shall be of 31.75mmx 61.6mmx 1.2mm thick.2)Window bottom & top track (for mesh window) frame shall be of 19mmx 31mmx1.2 to 15mm thick .3) Th window sash frame for glazed window shall be of 39.40mmx 17.70mmx 1. to 1.2mm thick and the mesh shutter sash shall be of 43mmx 14mmx 1 to 1.5mm thick. |
| 22 | Supply and fix Aluminium powder coated openable/side fixed ventelator with appropriate frame section including 4 to 5mm thick pin head or hatched glass all as directed by the Engr Incharge including provn of appropriate opening for fixing of exhaust fan and including with or wthout gauged shutter including jointing cleat, glazing clips, rubber neopreone packing including necessary accessories like handles, hinges etc complete all as specified and directed.Note : The contractor should be approved the frame section for Almn window/& window/ ventelator from the Engr- in-charge before procurement of the material. |
| 23 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and directed. |
| 24 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 25 | Demolition of cement concrete (reinforced) of any decscription and in any position not otherwise specifically provided for complete all as specified and directed. |
| 26 | M&L for precast cement concrete solid building blocks or slabs 10cm thick type C-1 1:3:6 using 20mm graded stone aggregate and setting in mortar,(1:4) complete all as specified and directed. |
| 27 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and directed. |
| 28 | Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil complete all as specified and directed. |
| 29 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for manhole&Septic tank all as specified and as directed. |
| 30 | M&L for Reinforced cement concrete (nominal mix) type B- 1(1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers,band , bressummers,lintels over 1.5m span etc all as specified and directed. |
| 31 | M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate)as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 32 | M&L for Precast RCC in type B1, 1:2:4, using 20mm graded stone aggregate in CM 1:6 for landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face with plain faces including setting in CM 1:6 complete all as specified and directed. |
| 33 | M&L Formwork to sides and soffits flat rough finished concrete surface of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves,kitchen platform,foundation for post etc complete all as specified and directed. |
| 34 | S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 35 | All as item No 34 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 36 | M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and as directed . |
| 37 | M&L 15mm thick rendering plaster brick or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:4 including adding water proofing compound as per manufactures instruction complete all as specified and as directed. Note : WPC will measured and paid separatly |
| 38 | Material and labour for rendering 5mm thick in Cement Mortar 1:3 on brick work or concrete surfaces of ceiling chajja etc , finished even and smooth without using extra cement complete all as specified and as directed. |
| 39 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 40 | M & L for mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 41 | M&L for framed work such as grills, gratings,flat iron for fencing post etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 42 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members N exc 4 kg complete all as specified and as directed. |
| 43 | M&L preparing new surface over 10 cm width or girth of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed. |
| 44 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 45 | S & F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 46 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clearspan, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed. |
| 47 | M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed. |
| 48 | M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, sub base, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed. |
| 49 | M&L Chequered cement concrete coloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 20 mm thick screed bed in CM 1:4 complete all as specified and directed |
| 50 | Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for drain,roof padding concrete etc complete all as specified and directed |
| 51 | M&L for screed bed or bedding layer of mortar 20mm thick in Cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturer's instructions on fair faces of concrete surfaces over roof slab complete all as specified and as directed.Note: Liquid water proofing compound shall be measured and paid separately.Make : Fosroc/Dr Fixit/Asian Paint |
| 52 | M&L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15cm over a coat of bitumen primer @ 0.20 Kg/Sqm and finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufactures instruction complete all as specified and directed. Note : The work shall be carried out by authorised applicators of manufactures. |
| 53 | M&L for cleaning the surface to remove all dust, dirt etc including Priming the surface with one coat of Smartcare Bituminous primer of make -Asian Paints/ equivalent to enhance the bonding properties. Providing and laying of protective Geotextile fabric 45GSM with proper overlaps. Supplying and applying two coat of single component, elastomeric,pitch modified PU coating Smartcare Flexiseal PU or approved equivalent with minimum elongation of 300% and tensile strength of 2 N/mm2 as per ASTM D412 and Shore A Hardness of 90 as per ASTM D 2240. The PU Coating shall have crack bridging ability of 2mm. The system consists of applying the water proofing treatment @ 1.2 Kg/ Sqm and shall havecrack bridging ability of 2mm etc complete as per manufacturer's instruction and complete all as specified and directed. Note: The treatment should be carried out by the authorised applicator of the company |
| 54 | M&L for heavy duty vitrified unpolished porcelain floor tiles of size 300 x 300mm, 10mm thick of make Neo Deccan Natural of 'Somany' or Endura of 'Johnson' or equivalent of other specified makes suitable for heavy vehicle movement, laid in floors /skerting of parepet etc of pattern as approved, pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specifiedset and jointed with Ezy Grout with spacers of somany to match complete all as specified and as directed. |
| 55 | M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and rough to receive the top finish complete all as specified and directed |
| 56 | Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 57 | Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 58 | Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 59 | Refixing of old GI steel tubes and connections after cleaning of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 60 | Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 61 | Refixing of old GI steel tubes and connections after cleaning of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed. |
| 62 | S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 63 | S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 64 | S&F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed. |
| 65 | Dismantling existing tanks exc. 500 lit & n. exc. 1000 litres capacity, removing off the site complete all as specified and as directed. |
| 66 | Supply and Fix, 1000 litres capacity Rotational Moulded Polyethylene water storage tanks ( Cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. |
| 67 | Meterial and labour for Providing, cement concrete type B-0 ,1;2:4 using 12.5mm graded stone aggregate in roof kerbs ,coving for chajja or mud stops, rounded or chamfered on edges etc complete all as specified and directed |
| 68 | S&F and in repair Ball valves 25 mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed. |
| 69 | S&F in repair 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed. |
| 70 | S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed. |
| 71 | Cutting chases, pinning in Brick wall, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith complete as specified and as directed. |
| 72 | Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR)/HDWR Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra. |
| 73 | Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed. |
| 74 | Dimolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish complete all as specified and directed. |
| 75 | Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed. |
| 76 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel including necessary form work complete all as specified and as directed. |
| 77 | Supply and fix in repairs stainless steel telescopic ball bearing channel, zinc plated finish for drawer including necessary fittings up to length of 600mm fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 78 | Supply and fix in repairs Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 79 | Supply and fix in repairs Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 80 | Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and directed.MAKE: EBCO/ GODREJ / KAFF / HETTICH |
| 81 | Supply and fix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm Laid in any length with rubber ring joint complete all as specified and as directed. |
| 82 | Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard dense soil complete all as specified and directed |
| 83 | Removing excavated material (Soils) not exc 1.50km but exc 5.0km and depositing where directed complete all as specified and as directed. |
| 84 | Supply and fix two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. |
| 85 | S& F 15mm bore dia Pillar cock chromium plated with wall flange complete .screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed.Make : CERA ,Cat part No : QTF2006101, |
| 86 | Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 87 | S&F in repairs Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Fixed-in-repairs, complete all as specified and as directed. |
| 88 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 89 | S&F sinks with drainage board made of stainless steel of lmm thick, kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 90 | Supply and fix in repairs, stainless steel plate racks made of stanless steel 0.80mm thick sheet standard size 24'x36x10\\" and design as approved by GE, complete all as specified and as directed. Make: Nirali/Parryware as approved by GE. |
| 91 | Supply and fix in repairs corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per Cat No.ACN-1173 of Jaquar or T6010A1 of Parryware fixed on walls complete all as specified and as directed . |
| 92 | S&F as in repairs Viterous china wash down water closet pan (pedestal pattern) and 'P' or 'S' trap including fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe, complete complete all as specified and as directed. (Excl flush tank): Make : Prayag or equivalent in Paryware/Hindware |
| 93 | Supply and fix in repair Vitreous China wash basin, white, flat back, size 600x480mm excluding ditto but including brackets making good to surfave etc , complete all as specified and directed. |
| 94 | S&F as in repairs PVC valveless, symphonic action type low level flushing cistern white with inlet, ball valve, float and handle etc complete capacity 10 litres including brackets and upto 1mtr long PVC pipe of 40mm dia and bend complete all as specified and directed. |
| 95 | S&F in repairs Towel rail 600mm long complete all as specified and as directed. Make : Prayag Cat No GBA-131 or equivalent in Parryware/Hindware) |
| 96 | S&F in repairs soap dish complete all as specified and as directed. Make : Prayag Cat No GBA-151G or equivalent in Parryware/Hindware) |
| 97 | S&F in repairs 5.50mm thick looking mirror of size 600 x450mm mounted on 6mm thick plywood backing or AC sheet backing including framing with 2nd class hard wood of size 30mm x40mm decorative type polished and fixed to wooden plugs with cromium plated brass screws and cupwashers and chamfered glass from all sides fixed with steel screws all as specified and directed. |
| 98 | S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.. |
| 99 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. |
| 100 | Taking down Cast iron / PVC pipe 75mm/ 110mm, etc jointed in cement mortar taking out of wall. including all fittings, heads, sheos, bends, swan-necks, etccomplete all as specified and as directed. |
| 101 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 102 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 103 | S & F PVC (SWR) bends any radious 110 mm bore provided with acess door complete all as specified and as directed. |
| 104 | S & F PVC (SWR) bends any radious 75mm bore provided with acess door complete all as specified and as directed. |
| 105 | S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and as directed. |
| 106 | S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed. |
| 107 | S&F in repair 100mm dia PVC floor multi trap with and grating of size 100 x 100 mm complete all as specified and as directed. |
| 108 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 109 | S&F in repairs double coat hook with brass brackets Make.Cat No 6905A1 of Parryware/ F580007 of Hindware / ACN -1161N of Jaquar or equivalent all as specified and directed |
| 110 | Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction and all as specified and as directed. as directed: NOTE: The painting work shall executed as per manufacturer instructions .Make :-APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 111 | M&L Preparing newly plastered surfaces of external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction and all as directed.Make:APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 112 | M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1.5mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer all as per manufacturer instructions complete all as specified and as directed. |
| 113 | M&L for complete removal of existing treatment on old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 114 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 115 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 116 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender