Tender For Special Repair Of Drains In Ra At Cad Pulgaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Oct 2026
14 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Drains In Ra At Cad Pulgaon.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Oct-2026 | CORRIGENDUM NO 1 | Date | 17-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC in any descriptions and in any position etc. complete all as specified and as directed. |
| 2 | M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and directed |
| 3 | M&L cement concrete PCC 1:3:6 type C 1 as in surface channel and drain complete all as specifed and directed . |
| 4 | Demolition of Brick work or stone boulder masonary built in cement mortor complete all as specified and directed |
| 5 | M&L Brick work with sub class 'B' bricks, straight or curved on plain exceeding 6m mean radious, built in cement mortar (1:6) complete all as specified and directed. |
| 6 | M&L PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping to drain wall including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 7 | Extra for forming fair finished drain or chnnel 30cm inner girth in cement concrete, using extra cement, incl forms,moulds,mi-tred/stopped ends etc |
| 8 | M&L, for Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. |
| 9 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces on cement mortor 1:4 fair finished even and smooth with out using extra cement complete all as specified and as directed by Engineer-in- charge. |
| 10 | Demolition of reinforced cement Concrete of any description and in any position disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m as directed by the Engineer in Charge. (Reinforcement shall be cut as required to facilitate demolition) complete all as specified and directed. |
| 11 | M & L for precast reinforced cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed. |
| 12 | M & L for mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. |
| 13 | Excavationg in trenches, n.exc 1.5 m wide & n.exc 1.5 m deep for foundation etc, or for shaft, wells, cesspits, man holes etc not exceeding 10 Sqm on plan & getting out in soft/loose soil |
| 14 | Returning ,filling in including spreading , levelling ,watering & well ramming in layers n exc 25cm thick complete all as specified and directed |
| 15 | Removing surplus excavated soil to a distance n. exc. 50 metre and depositing where directed at a level n.exc 1.5 m above the stafrting point. |
| 16 | Demolition and breaking up drain pipes 300 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 17 | M&L Reinforced concrete pipes, class NP-2 of 300mm bore internal dia laid and jointed complete with colars in cement mortar. |
| 18 | PCC (1:3:6) type C-2 using 40mm graded stone aggregate Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested;haunching against sides of 300 mm nominal bore of pipes after they are laid and tested in trenches complete as specified pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 01, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysOct 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender