Tender For Repair And Maintenance Of Internal Electrification, Cooling Appliance, Allied Works At Cgae And Cgra Bhubaneswar Under Ge (I) (Cg) Bhubaneswar
Tender Value
23.09 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
3 days left
EMD
46184
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Electrification, Cooling Appliance, Allied Works At Cgae And Cgra Bhubaneswar Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed . |
| 2 | M&L for point wiring with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded FRLS copper conductor cable of size 1.5 Sqmm for earth continuity wire, to be drawn in and including PVC conduit heavy duty with concealed wiring, MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick switch board and brass screws with cap washers for one light/Fan point controlled by one single way switch including all necessary wall cutting and making good disturbed surface all as directed and specified.(Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Conduit :-Plaza/Prestoplast/Precision) |
| 3 | M&L Point wiring for one light point or one fan point controlled by one switch with two runs of FRLS grade PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor as for earth continuity wire to be drawn in and including PVC casing & caping ( medium grade) not less than 25 mm width with fittings & fixtures including MS sheet metal switch / terminal box 1.22 mm thick upto (200x300)mm size duly covered with backelite sheet cover 3.00mm thick and continutiy conductor shall be connected to common earth and earth dolly and making good disturbed surface to walls complete all as specified & directed . (Make of wire: .(Make of wire: Finolex/Polycab/Plaza Make of PVC Casing-N- Caping :-Plaza/Prestoplast/Precision) |
| 4 | All as per here and before item No-3 above but Concealed wiring in Existing Conduit. |
| 5 | All as per here and before item No-3 above but for one light point controlled by one two way switch |
| 6 | All as per item No. 3 above but for call bell point. |
| 7 | All as per item No. 3 above but one 3 pin socket outlet 5 Amps on same board. |
| 8 | All as per item No. 3 above but one 3 pin socket outlet 5 Amps but independent board with cable 1.5 Sqmm two run & 1.5 Sqmm one run of earth continuty. |
| 9 | All as per item No.3 here in before but for 5/15 Amps point on independent board with two runs of 2.5 Sqmm FRLS grade PVC insulated unsheathed stranded Copper conductor and 2.5 Sqmm, FRLS grade PVC insulated, unsheathed, stranded copper conductor as earth wire. |
| 10 | Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement. |
| 11 | M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 1.5 Sqmm and one run of 1.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and complete all as specified & directed .Note : Two runs of 1.5 Sqmm copper wire,one run of 1.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision) |
| 12 | M&L Sub main wiring using two runs of FRLS grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 2.5 Sqmm and one run of 2.5 Sqmm FRLS grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and complete all as specified & directed .Note : Two runs of 2.5 Sqmm copper wire,one run of 2.5 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza,Make of PVC Conduit:-Plaza/Prestoplast/Precision) |
| 13 | M&L Sub main wiring using two runs of FR grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FR grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size and complete all as specified & directed .Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.Make of wire: .(Make of wire: Finolex/Polycab/Plaza , Make of PVC Conduit-Plaza/Prestoplast/Precision) |
| 14 | Supply and fixing in replacement of Step type electronic Fan regulator flush type on the existing phonolic laminated sheet etc as required as existing type and size complete all as specified & directed (Make-Anchor/Cona/Havells) |
| 15 | Supply and fixing in replacement including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 16 | Supply and fixing in replacement including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 17 | Supply and fixing in replacement modular Bell push 6A 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 18 | Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 19 | Supply & fixing in replacement including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 20 | Supply and fixing in replacement of Modular Fan regulator,120 watts 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 21 | Supply and fixing in replacement white modular cover plate with frame 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 22 | Supply and fixing in replacement white modular cover plate with frame 2 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 23 | Supply and fixing in replacement white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 24 | Supply and fixing in replacement white modular cover plate with frame 4 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 25 | Supply and fixing in replacement white modular cover plate with frame 6 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 26 | Supply and fixing in replacement white modular cover plate with frame 8 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells) |
| 27 | Supply and fixing in replacement modular metal flush box 1/2 Module complete all as specified and directed. |
| 28 | Supply and fixing in replacement modular metal flush box 3 Module complete all as specified and directed. |
| 29 | Supply and fixing in replacement modular metal flush box 4 Module complete all as specified and directed. |
| 30 | Supply and fixing in replacement modular metal flush box 6 Module complete all as specified and directed. |
| 31 | Supply and fixing in replacement modular metal flush box 8 Module complete all as specified and directed. |
| 32 | Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed mounted or surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete in replacement of old conventional light fitting complete all as specified & directed. |
| 33 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete in replacement of old conventional light fitting complete all as specified & directed.. |
| 34 | Supply and fixing in replacement round shape 15 watt 220 volts AC recessed or surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete in replacement of old conventional light fitting complete all as specified & directed. |
| 35 | Taking down old Unserviceable DB including fittings/fixtures with MCBs of any make and size all as specified and directed |
| 36 | S&F in replacement MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified & directed. (Make/Model :Cat No:DBSPN006DD of L&T or Standard/Legrand/HPL//Havells) |
| 37 | S&F in replacement MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified & directed.(Make : L&T/Legrend/Havells |
| 38 | S&F in replacement MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified & directed.(Make : L&T/Legrend/Havells |
| 39 | S&F in replacement MCB DB made of sheet steel phosphatised, powder painted, double door with bus bar, neutral link, earth bar and din rail of TPN 4 way, 415 Volts fixed in wall, making good disturbed surfaces, complete all as specified & directed (Make : L&T/Legrend/Havells ) |
| 40 | Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with minimum service value 5.10 cubic meter/minute/watt. Five star rated with brushless direct current motor (BLDC) complete all as apecified and directed. |
| 41 | S&F in replacement MCCB 4 pole,DU100H, with fixed thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 63 Amps.(Make: L&T,Cat No.CM97933OOH2 or Standard/Legrand/HPL//Havells) |
| 42 | S&F in replacement MCCB 4 pole,DU125H, with fixed thermal & magnetic release of breaking capacity 30 kA, 415 Volts, 100 Amps.complete all as specified & directed (Make: L&T,Cat No.CM97933OOJ2 or Standard/Legrand/HPL//Havells) |
| 43 | S&F in replacement Isolator, FP, 415 Volt 63 A TPN, of breaking capacity 35KA. complete all as specified & directed (Make L&T,Cat No.BF406300 or Standard/Legrand/HPL//Havells) |
| 44 | All as per item No. 43 above but FP, 415 Volt 100 A TPN (Make L&T,Cat No.BF410000 or Standard/Legrand/HPL//Havells) |
| 45 | S&F in replacement MCB, SPN. 6-32 Amps rating 240, volt, 'C' series, 10 kA (Make L&T,Cat No.BB20320D or Standard/Legrand/HPL//Havells) |
| 46 | S&F MCB in replacement SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make L&T,Cat No.BB10320D or Standard/Legrand/HPL//Havells) |
| 47 | Supply and fixing in replacement of conventional fitting, High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. ( Make /Model No :- CCS-100-20-65-HL2-DP-NWH(BRIGHT LINEA) of Crompton or equivalent of Phillips/Havells/ Bajaj/Wipro ) |
| 48 | Supply & fixing in replacement of conventional Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 25 watt.including provn of necessary connection complete.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Bajaj/Wipro) |
| 49 | Supply and fixing in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata) |
| 50 | S&F in replacement sheet metal enclosure with socket plug top and MCB with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp 240 Volts complete with taking down old U/S existing sheetmetal enclosure. ( Make L&T/Legrand /Standard). |
| 51 | Disconnecting electrical wire from ceiling rose, taking down ceiling fan of 1200/1400 mm sweep size and any make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable like capacitor, connector, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as directed by Engineer-in-Charge. (NOTE : Spare parts to be replaced shall be measured and paid separately., as supply only items was labour element in voles for replacement of spare parts shall deemed to be included in the unit rate quoted by the tenderer). |
| 52 | All as per item No.51 here in before but for exhaust fan 300 mm/380mm sweep. |
| 53 | All as per item No.51 here in before but for exhaust fan 450 mm sweep. |
| 54 | All as per item No.51 here in before but for PVC Ventilating fan 200 mm sweep. |
| 55 | All as per item No.51 above but for air circulating fans of any make / type and size 450/600 mm sweep. |
| 56 | M&L for rewinding of the motor of AC ceiling Fan of any make and size 1200 / 1400 mm sweep with super enamelled copper wire of existing gauge to obtain the specified and satisfactory RPM as per manufacturers specification, including replacement of all insulation materials, varnishing heating, drying, assembling of stator & rotor etc and testing complete all as directed. |
| 57 | All as per item No.56 above but for exhaust fan of any make / type and size 300 mm/450mm sweep. |
| 58 | All as per item No.56 above but for PVC Ventilating fans of any make / type and size 200 mm sweep. |
| 59 | All as per item No.56 above but for air circulating fans of any make / type and size 450/600 mm sweep. |
| 60 | Supply and replacement of shaft for ceiling fan of size 1200mm. complete all as specified & directed |
| 61 | Supply and replacement of PVC holder stand for capacitor of ceiling fan 1200mm sweep.complete all as specified & directed |
| 62 | Supply and replacement ball bearing of any size and type suitable for any type / make / size of ceiling fan .complete all as specified & directed |
| 63 | All as per item No.61 above but for exhaust fan of any type/make and size (300 /450 mm sweep) .complete all as specified & directed |
| 64 | Supply and replacement of capacitor 230 Volts AC 50 HZ and rated capacity 2.5 MFD for ceiling fan.complete all as specified & directed |
| 65 | Supply and replacement of capacitor 230V AC 50 HZ and rated capacity 3.15 MFD for exhaust fan.complete all as specified & directed |
| 66 | S&F PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 0.75 Sqmm for ceiling fan.complete all as specified & directed |
| 67 | S&F gun metal bush of suitable size for exhaust fan of any type / size as per existing type all as specified & directed. |
| 68 | S&F MS hook and clamps MS flat iron of existing size after taking out old rusted hook & clamp etc.for hanging/fixing of ceiling fan including cemented work all as specified & directed. |
| 69 | S&F MS anodized bolts with anodized nuts, spring washers split pin etc size 50 mm long 10 mm dia half threaded type with split pin hole for hanging of ceiling fan.complete all as specified & directed |
| 70 | S&F in repairs down rod of suitable size including gromet/ reel type rubber pad with clamp & bolts, nuts and washers suitable for housing ceiling fan.complete all as specified & directed |
| 71 | S&F in repairs louvers shutter made of MS sheet metal 1.2 mm thick for round base and 0.8mm thick for flaps confirming of mounting edges frames made of MS Flat of size 25mmx3mm including heavy duty rust proof passivated bolts, of size 50mm long 8mm dia to be fixed on wall after drilling and duly painted by two coats of synthetic enamelled paint (spray painting) over a coat of primer for exhaust fans up to size 300 - 450 mm sweep.complete all as specified & directed |
| 72 | S&F in repairs of Metallic Fan Blade suitable for Exhaust fan of size 300 mm sweep complete all as specified & directed |
| 73 | S&F in repairs of Metallic Fan Blade suitable for Exhaust fan of size 450 mm sweep complete all as specified & directed |
| 74 | S&F in repairs of Metallic Fan Blades suitable for Ceiling fans of size 1200 mm sweep complete all as specified & directed |
| 75 | Supply & Replacement PVC canopy suitable for ceiling fan of any type / make for both end of down rod complete all as specified & directed. |
| 76 | S&F in repairs of PVC plug top of 5 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Roma) |
| 77 | S&F in repairs of PVC plug top of 15 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Roma) |
| 78 | S&F in repairs of Metallic plug top of 20 Amps, 3 pin,230 volts complete all as directed. (Make:L&T/Havells/Cona/HPL) |
| 79 | Supply and Replacement of Incoming cable with 3-core,PVC Stranded copper conductor of sizes 1.5 sq.mm with taking down of old unserviceable incoming cables all as specified and directed, Make- Polycab or equivalent of Richa/Mescab/Gloster |
| 80 | S&F in replacement Modular switch 2 way 6A, 1 module complete all as specified and as directed. |
| 81 | S&F in replacement Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells |
| 82 | Fixing only Switch piano, flush type single pole, one way, 5 Amps (Serviceable switch obtained from item No-1 shall be reused).complete all as specified & directed |
| 83 | S&F in replacement Switch piano, flush type, two pole, two way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells |
| 84 | S&F in replacement Switch piano, flush type, single pole, one way 15 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells |
| 85 | S&F in replacement Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells. |
| 86 | S&F in replacement Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells. |
| 87 | S&F in replacement Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt including box all as specified and directed . Make:- Anchor/ Cona/Havells. |
| 88 | Fixing only Switch socket combination 5 Amps, flush type (Serviceable awitch socket combination obtained from item No 1 shall be reused) |
| 89 | S&F in replacement Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt .complete all as specified & directed Make:- Anchor/ Cona/Havells. |
| 90 | S&F in replacement Socket outlet 2 in 1, 5 pin, 5/15 Amps flush type 240 Volt .complete all as specified & directed Make:- Anchor/ Cona/Havells. |
| 91 | Fixing only socket Outlet 15 Amps, flush type (Serviceable awitch socket combination obtained from item No 1 shall be reused) |
| 92 | S&F in replacement Switch socket combination 5/15 Amps flush type,6 pin,5 in 1.complete all as specified & directed (Make:- Anchor/Cona/Havells) |
| 93 | S&F in replacement Ceiling rose,3 terminal PVC/poly carbonate isolated body.complete all as specified & directed (Make:- Anchor / Cona/Havells.) |
| 94 | Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size in replacement of old conventional light fitting all as specified and directed. |
| 95 | M&L for services of jointing/taping or checking the electrical connections and securing after defect rectification in existing points/connection/items for light/call bell/ fan/regulators/capacitor/ sockets/ switches/ceiling rose/ switch socket boards/ junction boxes /metal/MCB sockets/power sockets or connected circuits till MCB control in DB/earthing complete and refixing the existing items after defect rectification, as and when required/directed. Note: (i) Sufficient electrician /helper and other required items are to be provided immediately for repair as and when intimated (ii) The defect rectification of all connected items in the same circuits/ switch socket board will be counted as one job only (iii) Necessary tapping jointing lugging, minor connecting wires and securing and other minor items to make good the defects is deemed to be included. |
| 96 | S&F in replacement 3 core 2.5 Sqmm copper cable with PVC insulation 1100 Volts complete all as specified and directed. |
| 97 | S&F in replacement sheet metal enclosure with socket plug top and MCB with Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB of 20 Amp,415 Volts complete all as specified and directed |
| 98 | S & F in Replacement Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed. |
| 99 | S & F fan regulator knob as per sample complete all as specified & directed. |
| 100 | S & F in replacement 24\\" wall mounting Fan flameproof ,epoxy light grey, 3 nos. of blade with power 230V & Air delivery 900 RPM recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 55 protection complete all as specified & directed. |
| 101 | S & F in replacement 18\\" Exhaust Fan flameproof ,epoxy light grey,elect. Rating 16, power 230V & Air delivery 900 RPM recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 55 protection complete all as specified & directed. |
| 102 | Supply & replacement of industrial Air circulating Fan 450 mm dia size & 1440 RPM heavy duty wall mounting aluminium metal blade having air flow capacity 150 cubic meter/minute, 240 Volts , 50 HZ complete all as specified & directed. |
| 103 | Supply and charging of Refrigerant gas R-22 for all t type AC,refrigerator and water cooler of various capacity after leak test, complete all as specified and directed. |
| 104 | All as per item No-1.00 above but R-410 gas for Split AC of various capacity after leak test |
| 105 | All as per item No-1.00 above but R-32 for Split type AC of various capacity after leak test, complete all as specified and directed. |
| 106 | S&F, in replacement, capacitor 230/440 VAC, 50 Hz, 6 to 10 MFD, + 5% for all type airconditioners complete all as specified and directed. |
| 107 | S&F, in replacement, burst proof series dual capacitor 230/440 VAC, 50 Hz, 25 to 50 +6 MFD, + 5%, 7 pin for all type Airconditioners complete all as specified and directed. |
| 108 | S&F, in replacement of Single phase Power contactor ,20 Amps,50Hz , 230 volts for Split Ac of 2TR capacity with taking down old one complete all as specified and directed. |
| 109 | S&F, in replacement of printed circuit board (PCB) with display board,sensor and remote control for Indoor and out door Units of Split type AC of 1.5 TR capacity all as per existing type and make including taking down complete all as specified and directed. |
| 110 | S&F, in replacement of printed circuit board (PCB) with display board,sensor and remote control for Indoor and outdoor Units of Split type AC of 2.0 TR capacity all as per existing type and make including taking down complete all as specified and directed. |
| 111 | S&F, in replacement of printed circuit board (PCB) with display board,sensor and remote control for Indoor and out door Units of Split type AC of 1.5 TR capacity (Inverator Model) all as per existing type and make including taking down complete all as specified and directed. |
| 112 | S&F, in replacement of printed circuit board (PCB) with display board,sensor and remote control for Indoor and out door Units of Split type AC of 2.0 TR capacity (Inverator Model) all as per existing type and make including taking down complete all as specified and directed. |
| 113 | S&F, in replacement of Air Filter Sensor motor of Split type AC(Inverter Model) of 1.5/2.0 TR capacity, 5 Star all as per existing type and make including taking down complete all as specified and directed. |
| 114 | S&F, in replacement of Swing motor of Split type AC of 1.5 TR/2.0 TR capacity of STAC of without Inverter model STAC all as per existing type and make including taking down complete all as specified and directed. |
| 115 | S&F, in replacement, of Remote Control hand set with suitable capacity Battery suitable for capacity of 1.5/2.0 TR (As per sample) of STAC/ Cassette AC complete all as specified and directed. |
| 116 | Taking down old Unserviceable Printed circuit board (PCB) with display board,sensor and remote control including all connected accessories of Indoor and outdoor Units of any type of AC and any make ,model and capacity of 1.5 TR/2.0 TR and send to reputed / authorised Company Workshop for necessary repairs with replacement of Spares for functionable and refix the same in its own position and testing all as per existing type and make complete all as specified and directed. NOTE :- Spare parts used in repair are deemed to be included in Unit rates. |
| 117 | Supply and fix, in replacement, Fin and Tubes type air cooled condenser Unit for STAC of capacity 1.5/2.0 TR with copper tubing suitable size , Make and Model as per existeing AC complete all as specified and directed. |
| 118 | Supply and fix, in replacement, Fin and Tubes type air cooled Evaprator(cooling Coil) Unit of capacity 1.5/2.0 TR with copper tubing suitablesize,Make and Model as per Existing AC, complete all as specified and directed. |
| 119 | S&F, in replacement,Copper Pipe suitable size of dia and gauge for existeing AC ,complete all as specified and directed. |
| 120 | S&F, in replacement, fan blade assembly made of aluminium alloy complete for out door unit of split type AC of any capacity complete all as specified and directed. |
| 121 | S&F, in replacement, PVC fan blade suitable for water cooler of any capacity and size complete all as specified and directed. |
| 122 | S&F, in replacement, PVC blower suitable for any make/ model of Indoor unit of Split type air conditioner of cap 1.5/2 TR as required complete all as specified and directed. |
| 123 | S&F, in replacement of synthetic thermal insulation for with binding tape of suitebale dia for suction copper pipe of Split type AC complete all as specified and directed including taking out old deterioted pipe and burried in ground. |
| 124 | S&F, in replacement of Defrost PVC water drain pipes with clamps of size 20 mm dia for split type AC including taking down deterioted pipe and burried in ground complete all as specified and directed. |
| 125 | S&F in replacement corrugated PVC flexible drain pipe with clamps for out let of water cooler, size 36 mm inner dia , including taking down old deterioted pipe and burried in ground complete all as specified and directed. |
| 126 | Dismantling of Split type Air Conditioner, Refrigerator, water coolers and deefrizer of any capacity & 'make', opening up for servicing, inspection / examination for serviceability of compressor, fan, motor, relays,PCB of indoor and outdoor units, capacitors, cleaning the evaporator and condenser with compressed air/ water as required, lubrication of moveable parts, replacement of worn out bolts , screws, rubber gaskets, seals, terminal & link clips, unserviceable wiring, rubber mounting for compressor including all minor spare parts for carrying out servicing including reassembling & testing of AC, Refrigerator & water cooler complete all as specified and directed. Note(i) Contractor will submit letter for approval of AC mechanic from Engineer-in-Charge before commencing the work and he should be report to the concerned JE daily, if he fails to report in any day except holiday the recovery of Rs 750/- per day will be deducted form contractor work done. |
| 127 | S & F in replacement of hermetically sealed Rotary type compressor of 1.5 TR capacity for split type AC of existing make and model with new compressors and assembling testing the same with replacement of necessary drier and capillary tube including taking down complete all as specified and directed. |
| 128 | All as per item No-28.00 abovebut 2.0 TR Split type Room Air Conditioner compressor including taking down. |
| 129 | S & F , in replacement of compressor for water cooler 40/80 Ltr capacity and assembling and testing the compressor unit complete including taking down complete all as specified and directed. |
| 130 | M & L for repairs to worn out body of STAC Out door unit of any make & capacity by replacing worn out portion by providing new CRCA flat sheet / MS angle or strip of appropriate gauge as per existing and fabricated to the shape as required including necessary welding, filling of putty, grinding to make the jointed surface even and apply two coats of synthetic paint over one coat of red oxide all as directed and specified including taking down complete all as specified and directed. |
| 131 | M & L for repairs to body of water cooler by providing MS sheet 2 mm thick including welding, replacement of wornout nuts & bolts and repair/fabrication of the compressor mounting base as per existing fabrication work including painted by two coats of synthetic enameled paint of existing cooler over a coat of red oxide primer complete all as specified and directed. |
| 132 | Taking out Condensing Fan motor of Split type AC of 1.5 /2 TR capacity from its existing base and dismantling the same and rewinding the burnt out winding with super enameled copper conductor with existing gauge and size of conductor and varnishing all insulating materials including making necessary heat treatment complete all as specified and directed. |
| 133 | Supply and Fixeing in Replacement of Voltage stabilzer of 5 KVA Capacity complete all as specified and directed. |
| 134 | S&F, in replacement of PTMT float valve of 15mm size suitable for water cooler of cap 40/80 ltr/hr capacity including taking down old float valve complete all as specified and directed. |
| 135 | S&F, in replacement push type water tap made of stainless steel chrome plated suitable for 40/80 Ltr capacity water cooler as per existing including taking down complete all as specified and directed. |
| 136 | Supply and Fixing in replacement of holding bracket / Base Stand for outdoor unit of all type AC all as directed and specified including taking down old unserviceable Brackets complete all as specified and directed. |
| 137 | S&F in replacement of Battery for Remote Control hand set with suitable capacity for all type of AC complete all as specified and directed. ( Make : Eveready/Nippo) |
| 138 | Repair / Maintenace of Kent/Usha Aquagard R.O.water purifier , Replacement of unserviceable components such as PCB, all Filters and membrane, Solenoid-valve, UV Lamp and other minor spare parts, refixing of serviceable spare parts and reassembling all as directed and specified.(NOTE : Spare parts to be replaced shall be measured and paid separately., as supply only items.). |
| 139 | Supply only of RO Water purifier Sedimentation/Spon Fillter of suitable make/size |
| 140 | Supply only of RO Water purifier Carbn Fillter of suitable make/size. |
| 141 | Supply only of RO Water purifier Membrane with suitable make/size . |
| 142 | Supply and replacement of Booster Pump Motore for RO |
| 143 | Supply only of RO Water purifier connection pipe of size 3/8\\" |
| 144 | Supply only of RO Water purifier connection pipe of size 3/4\\" |
| 145 | Supply only of RO Water purifier FRT |
| 146 | Supply only of RO Water purifier Solenoid valve |
| 147 | Supply only of Cooler water Lavel Controler |
| 148 | Supply only of SMPS 230 V 50 Hz Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender