Tender For Comprehensive Maintenance And Repairs To Firing Range And Adjoining Items At Tech Area At Itarsi Under Ge Bhopal
Tender Value
40 Lakhs
Estimated cost
Bid Submission
26 Sep 2026
19 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hoshangabad → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance And Repairs To Firing Range And Adjoining Items At Tech Area At Itarsi Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Surface dressing & clearance of grass,trees not exc 150mm dia and n exc15 cm deep including removal of excavated soil/grass all as per specified and directed. |
| 3 | Rough excavation n exc 1.5 Mtr deep & getting out in soft/loose soil complete all as specified and directed within MoD land. |
| 4 | Removing of excavated materials upto 250 m and depositing where directed complete all as specified and directed. |
| 5 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed. |
| 6 | M&L for forming embankment using excavated earth (retrieved from Sr item No 2.00) including raising for (or lowering) earth, spreading, in layers duly consolidated to OMC level with thickness of each layer not exceeding 30cm thick including ramming/rolling and finishing to required size, shape etc not exceeding 1.5m height complete all as specified and directed. |
| 7 | M&L for sand filling under Traverse/ Butt including shape and size as per site/size of Traverse/Butt as in repair Up to 15 mtr height complete all as specified and directed. |
| 8 | Excavating over area exc 150 sqm and n exc 500sqm and exc 0.30m and n exc 0.75m deep any type of soil existing Traverse/ Butt and forming same embankments including raising (or lowering) earth/sand-saw dust mix, spreading in layers n exc.30cm thick, ramming and finishing to required size,shape as per site/size of Traverse/Butt as in repair etc, up to 09m high from base complete all as specified and directed. Note:-(a) The work work will be done any arrester/firing butt of twice a month and in treverse once in six months. (b) While doing this work, the contractor will be responsible for tools and plants is own arrangement. |
| 9 | M&L uprooting vegetation and weeds by digging the area to a depth of 25cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh groths after 10 to 15 days and then fine dressing for planting new grass including disposal of all rubbish with all leads and lifts complete all as specified and directed. |
| 10 | Demolition of brick work built in cement mortar for drainges, wall and similar works portion ordered to be dismantled complete all as specified and as directed. |
| 11 | M&L Brick work with Fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified and directed using old size bricks. |
| 12 | All as per item No. 10.00 here-in before but except Fly ash. Note :- Old serviceable bricks obtained from item above, cleaned and shall be reused. |
| 13 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 14 | Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 15 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Supply only intregal water proofing compound as per specified and directed. |
| 17 | M&L for two coats of cement base paint on new/old plastered surfaces of wall including preparation of surfaces over one coat of alkali resistant primer all as specified and directed |
| 18 | M&L for two coats of white wash on new/old plastered surfaces of wall including preparation of surfaces all as specified and directed. |
| 19 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new/old work including preparation of existing wall surfaces including primer/removing of existing treatment etc complete all as specified and directed. |
| 20 | Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 21 | M&L for providing cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete including forms,curved/flat complete all as specified and directed. |
| 22 | M&L for providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) for surface channel and drain including formworks curved/flat complete all as specified and directed. |
| 23 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including formworks, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 24 | All as per item No. 22.00 here-in-before but exc 30cm inner girth/width of part there of over. |
| 25 | M&L for 150mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) laid in floor not execeeding 3 Sqm and 10mm joint shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen and 3 parts sand), finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L Edge Stone to Stone sett flooring with stone setts of size 250 to 300mm long ,150 to 200 mm wide and 450 mm deep and side dressed;bedded in cement mortar 1:3,joints 20 mm thick;grouted in cement mortat 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush, complete all as specified and directed. |
| 27 | Supply only mettalic floor hardner as per specified and directed. |
| 28 | M&L for cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in kerb stone/Cooping complete all as specified and directed. |
| 29 | M&L for cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed. |
| 30 | M&L Forming 20mm thick 200mm Depth Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ a all as specified and directed. |
| 31 | Demolition of RCC any descripation and any postion not otherwise specifically provided. |
| 32 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter all as specified and directed. |
| 33 | Use and waste for rough finish surfaces flate or curved Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves, chajjas,columns, walls including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed. |
| 34 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed. |
| 35 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders all as specified and directed. |
| 36 | M&L for RCC type Nominal mix B0 1:2:4 (using 12.5mm graded stone aggregate) as in lintel, roof beam, Chajjas, columns, walls and roof slabs all as specified and directed. |
| 37 | M & L for RCC Nominal mix B0 1:2:4 (using 20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles, drainage and mass concrete complete all as specified and directed. |
| 38 | Deduct Schedule of credit (calculation will be done off line) Rs. 9000.00 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender