Tender For Provn Of Installation Of Ac And Allied Works At Mi Room, Ops Room, Electric Supply Connection To 02 Nos Prefab Shelter, Special Repair Of Gse Store At installation Baaz, C Bell Bay Under Ge C Bell Bay
Tender Value
25 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Installation Of Ac And Allied Works At Mi Room, Ops Room, Electric Supply Connection To 02 Nos Prefab Shelter, Special Repair Of Gse Store At installation Baaz, C Bell Bay Under Ge C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTION :Taking down wooden / Aluminium / Iron / PVC chowkhats or frames with shutters (with out taking off shutter from frame) not.exc 1.5 Sqm each complete all as specified and directed. |
| 2 | S & F anodised aluminum frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed. |
| 3 | S & F anodised aluminium window and ventilator shutters, aluminum section weighing 0.55 kg per meter including necessary jointing cleat aluminium glazing clips, rubber neoprene packing, anodised aluminum snap beading screw etc., complete all as specifed and directed |
| 4 | M & L powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern, with approved standard section and fixed to the existing window or ventilator frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including dismantling of old grill any type all complete as per requirement and as directed. |
| 5 | S & F 5.0 mm thick sheet figured glass, pin head type and glazing with rubber gasket in square n exc 0.5 Sqm in each pane., complete all as specified and as directed. |
| 6 | Dismantling plain or corrugated steel sheeting, any gauge, thickness incl Nainital or similar pattern roof covering complete all as specified and directed. |
| 7 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tenstile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed |
| 8 | S & F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed. |
| 9 | S & F mild steel hand rails, half round or other steel section or core for hand-rail straight portion drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 10 | Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and as directed. |
| 11 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar (1:6) finished even and smooth (without using extra cement) complete all as specified and as directed. |
| 12 | M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed. |
| 13 | M & L preparation of old plastered surfaces of walls and applying one coat of oil bound distemper on plastered wall surfaces complete all as specified and directed. |
| 14 | M & L for finishing walls with acrylic smooth exterior paint of required shade (two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm) and complete removal of existing treatment complete all as specified and directed. |
| 15 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.) |
| 16 | M & L 4mm thick non asbestos fibre cement building board fixed to timber/GI/Aluminium frame work with screws in ceiling including S&F anodised aluminium snap grid frame work of size 605mmX605mm and aluminium sections for false ceiling main/cross tee of size 36.5mmX25mmX2.4mm weighing 0.24 Kg/Rm and wall angle of size 38mmX25mmX2.4mm weighing 0.36 Kg/Rm and including S&F hangers 4mm dia GI (upto 1200mm length) adjoining level fixed in roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete including two coat of Oil bound distemper on new ceiling boad complete all as specified and as directed by the Engineer-in-Charge.. |
| 17 | Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15cm thickness (Below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M & L 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in plinth protection finished cement concrete surfaces finished even smooth without using extra cement including necessary construction joint complete all as specified. |
| 19 | M & L PCC 1:3:6, type C1 (using 20 mm graded agg) coping or filling for hold fast without using extra cement complete all as specified and directed. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 21 | M & L for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 22 | M & L Painting to new steel surfaces including prepration applying one coat of red oxide primer and two coats of synthetic enamel paint. |
| 23 | M & L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 24 | Dismantling structural steel works in doors, gates etc but excluding framed truss etc all as specified and directed |
| 25 | S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed. |
| 26 | S & F 1.00 mm thick Mild steel, plain, blacksheet in wall cladding,steel gates and similar work, cut to size, holespunched; includinground headed screws,clout nails or rivets and fixed /welded to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc complete all as specified and as directed. |
| 27 | S & F Rolling shutter without ball bearing, thickness of laths 1.00mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including dismantling of old rolling shutter. complete all as specified and directed. |
| 28 | E/M PORTION :Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed by Engr-in-Charge. |
| 29 | Returning, filling in soils including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick complete all as directed by Engr-in-Charge. |
| 30 | Removing excavated material (soil) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed by Engr-in-Charge. |
| 31 | Supply and lay GI tubing 50 mm dia, light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as directed by Engineer-in-Charge. |
| 32 | M & L cutting of road, hard standing made of concrete or premix carpet, WBM, soiling and morrum filling for laying of cable pipe all as directed and making good the road/hard standing by using all old/new materials and with PCC (1:2:4) etc, required to match with the existing surface complete all as specified and directed. |
| 33 | Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board factory fabricated indoor cubicle/kiosk type totally enclosed IP 66 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :- Please Enable Macros to View BoQ information |
| 34 | Supply, install testing and commissioning weather and vermin proof Outdoor type L.T. Panel board factory fabricated indoor cubicle/kiosk type totally enclosed IP 66 made out of 3.15 mm thick CRCA sheet metal enclosure of suitable size, with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly spray painted grey hammer tone with one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour, including connecting with L.T. armoured incoming and outgoing cables and including required sizes of cable lugs of aluminum complete all as specified and directed and consisting of following :- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender