Tender For special Repair/ Replacement Of Old Rusted Gi Pipelines From Ward Room To Mt Watch Tower And Pump House To Ngmmcb Det1, Cleaning Of 03 X Shallow Well At Otm Accn Near Baaz House And Mt Workshop, 02 X Submersible Pump For Shallow Well Near B
Tender Value
24 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
12 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/ Replacement Of Old Rusted Gi Pipelines From Ward Room To Mt Watch Tower And Pump House To Ngmmcb Det1, Cleaning Of 03 X Shallow Well At Otm Accn Near Baaz House And Mt Workshop, 02 X Submersible Pump For Shallow Well Near Baaz House At installation Baaz C Bell Bay Under Ge C Bell Bay
BOQ
| Sl. No. | Item Description |
| 1 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed. |
| 2 | Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed. |
| 4 | Removing excavated materials (soil) to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. |
| 5 | S & F for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP Protection of IP-67 having outer dia 80 mm and inner dia of 50 mm with necessary couplers, bends etc for protection of LT cable all as specified and directed. |
| 6 | Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of suitable size, 3 Phase 4 wire system outdoor type 3.15 mm, double door front and back openeing type separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 50 Sqmm 3.5 Core in and out(Panel board shall have sufficient space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 times pre treatment process and painted with epoxy power coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50 x 50 x 6mm thick duly painted and embedded in PCC (1:3:6) type C1, including taking down old u/s one complete and consisting the following provisions:- Please Enable Macros to View BoQ information |
| 7 | Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical panel board of suitable size, 3 Phase 4 wire system outdoor type 3.15 mm, double door front and back openeing type separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 50 Sqmm 3.5 Core in and out(Panel board shall have sufficient space to accommodate spare cables also) , incoming and outgoing feeders duly marked on revited plates etc, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 times pre treatment process and painted with epoxy power coated matt finish of SIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on angle iron frame of 50 x 50 x 6mm thick duly painted and embedded in PCC (1:3:6) type C1, including taking down old u/s one complete and consisting the following provisions:- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender