Tender For Special Repair To Jcos / Or Living Accn Bldg No T-125/8 Tot-125/11 And T-124/2 To T-124/7 At Rkt Regt Under Ge Missamari
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Sep 2026
6 days left
EMD
95158
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Jcos / Or Living Accn Bldg No T-125/8 Tot-125/11 And T-124/2 To T-124/7 At Rkt Regt Under Ge Missamari
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Sep-2026 | BOQ CORRIGENDUM | BOQ | 19-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering,complete all as directed |
| 2 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based corrugated steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler, complete all as specified and as directed. |
| 3 | S&F color coated (SDP) pre painted galvalume aluminium zinc coating AZ150 Gl based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw, butyl tape, end foam filler complete all as specified and as directed. |
| 4 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for,complete all as specified and directed. |
| 5 | Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed. |
| 6 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in adhesive compound as per manufacturer instructions and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed. |
| 7 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in adhesive compound as per manufacturer instructions and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, complete all as specified and directed. |
| 8 | Taking down wrought iron or mild steel work of any description not other wise proveded for |
| 9 | S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe.290. Gde-E-165 including necessary preperation of surfaces and applying one shop coat of red oxide, zinc chrome primer complete all as specified and as directed. |
| 10 | M&L 50mm thick cement concrete (1:2:4) type B-1( using 20mm graded crushed stone aggregate) as in sub base of floor finished even and fair complete all as specified and directed. |
| 11 | M&L 100mm thick cement concrete (1:4:8) type D-2( using 40mm graded crushed stone aggregate) as in sub base of floor finished even and fair complete all as specified and directed. |
| 12 | S&F 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 13 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 14 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but (without taking off shutters from the frames) complete all as specified and as directed. |
| 15 | Taking down Chowkhats or frames not exc. 1.0 sq. m each but (without taking off shutters from the frames) complete all as specified and as directed. |
| 16 | S&F powder coated anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron) complete all as specified and directed. |
| 17 | S&F Powder coated Anodised aluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed |
| 18 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directedNote:- (i) Wire cloth /glass shall be measured and paid separately under appropiate items. (ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed (iii) Fixing of shutters with fittings shall be as per manufacturers instructions. |
| 19 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 20 | S&F in repair Vitreous China wash down water closet pan, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 21 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve float and handle, PVC flush pipe, complete all as specified and as directed. |
| 22 | S&F in repair, vitreous China wash basin, white, flat back, size 550x400mm including brackets cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed. |
| 23 | S&F PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and as directed. |
| 24 | S&F in repairs brass cromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed. |
| 25 | Supply and fix in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers including taking down old unserviceable mirror ,complete all as specified and directed. |
| 26 | Taking down eaves rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 27 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls / Ceilings complete all as specified and as directed. |
| 28 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed. |
| 29 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 30 | S&F 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed. |
| 31 | S&F 110mm bore PVC (SWR) Cowl complete all as specified and as directed. |
| 32 | S&F in repair, 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 33 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors, including taking out old unserviceable 15mm bore GI pipe complete all as specified and as directed. |
| 34 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors including taking out old unserviceable 20mm bore GI pipe complete all as specified and as directed. |
| 35 | S&F in repair 15mm bore Bib taps, fancy type, chromimum plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 36 | S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed |
| 37 | S&F in repair, health faucet suitable for 15mm dia pipe, 1.25 meter long easy flexible tube in chrome finish & wall hook all as specified and as directed |
| 38 | S&F in repair, 15mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 39 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 40 | S&F 100 mm dia Grating with waste hole of CP (minimum weight 40 gms),complete all as specified and directed. |
| 41 | S&F in repair, PVC (SWR) multi floor trap 100mm outer dia. with grating including jointing with solvent cement, complete all as specified and directed. |
| 42 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish from the site complete all as specified and as directed. |
| 43 | M&L for Brickwork with burnt old size bricks, straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and as directed. |
| 44 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete including removing debries of the site complete all as specified and as directed. |
| 45 | M&L 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer as per manufacturer's instructions, finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured & paid separately |
| 46 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 47 | M&L preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 48 | M&L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 49 | M&L applying two coats of cement base paint over a coat of primer on new wall, ceiling surfaces complete all as manufactures instruction and as directed. |
| 50 | Dismantling water tanks of any descripition, capacity exc 500 lts and not exc. 1000 ltrs tanks complete in all as specified and as directed. |
| 51 | S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks four layer white colour (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms), complete in all as specified and as directed |
| 52 | S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 53 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. seperating serviceable fittings/fixtures, keeping in safe custody reuse under respective item and removal of unserviceable material from site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed. |
| 54 | Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed. |
| 55 | Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed. |
| 56 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Pipes, Cables etc and keep in safe custody for reuse, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 57 | Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Pipes, Cables etc and keep in safe custody for reuse, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender