Tender For Provn Of Panelling, Aluminium Window To Kg-46/1A, Installation Garbage Pit, Ro Plant Points And Tilling Works Near Bldg No P-5 & P-3 And Installation Of Brick Work At Veranda, 03 X Washing Points Near Bldg No P-5 At Sanjauli Under Ge (I) J
Tender Value
17.61 Lakhs
Estimated cost
Bid Submission
28 Sep 2026
19 days left
EMD
35220
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Panelling, Aluminium Window To Kg-46/1A, Installation Garbage Pit, Ro Plant Points And Tilling Works Near Bldg No P-5 & P-3 And Installation Of Brick Work At Veranda, 03 X Washing Points Near Bldg No P-5 At Sanjauli Under Ge (I) Jutogh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 2 | S&F steel work in tubular trusses, steel hollow sections etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed. |
| 3 | S&F framed work such as grills, gratings, etc.,incl for ornamental and intricate design with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladder; framed baluster; walk ways; railing, framework of water tanks staging and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 4 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital or similar pattern roof covering, fixed with J/L hooks or coach screws complete all as specified and directed. |
| 5 | S&F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. |
| 6 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, eaves board fixed with self tapping screws, complete all as specified and directed. |
| 7 | S&F 0.50mm thick prepainted aluminium zinc coating liner profile high strength steel sheet is an attractive, slightly fitted wall & ceiling cladding for exterior and interior use, on straight or curved surface complete all as specified and directed. |
| 8 | S&F 5mm thick solid plain/corrugated Polycarbonate transparent sheeting fixed with self tapping, screw including silicone sealant for waterproofing Joints complete all as specified and directed. |
| 9 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described, priming with Red oxide, zinc chrome and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 10 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and directed. |
| 11 | S&F anodized powder coated aluminium frame/shutters for doors, windows, ventilators size of frame 100x45x1.3 mm thick of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing and cleat for receiving glass/wire mesh etc. complete all as specified and directed. |
| 12 | S&F Aluminium anodised powder coated sliding type two/three track window with shutter and frame including aluminium grill and mosquito proofing net and 5mm thick tinted glass, size of frame 93x31.75x1.3mm thick for top and sides, 93x31.75x1.3mm thick, bottom and shutter frame 38x18x1.5 mm thick, including necessary handles, tower bolts, stopper etc., complete all as specified and directed. |
| 13 | S&F aluminum section powder coated of colour as approved, door shutters (single/double shutters) partially gauze and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter incl mortice lock arrangement complete all as specified and directed. Note: Glass to be measured and paid separately. |
| 14 | S&F sheet glass 5.5 mm thick glass in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 15 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 16 | S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. |
| 17 | S&F aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified and directed. |
| 18 | S&F 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 19 | M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 20 | S&F in repair 25mm dia stainless steel chromium plated curtain rails fixed with brackets, stops, rollers, etc. complete all as specified and directed. |
| 21 | M&L for brick work with sub class 'B' bricks old size straight or curved on plan built in CM 1:4 complete all as specified and directed. |
| 22 | M&L for plastering work 15 mm thick on fair surfaces of stone masonry, brick or concrete surfaces 1:4 to be finished even and fair (without using extra lime or cement), complete all as specified and directed. |
| 23 | Providing and fixing seasoned Pine Wood Ceiling/Paneling using solid pine wood planks of minimum 8 feet length, having a thickness of not less than 12 mm and width of 100 mm to 150 mm, as per approved design. The pine wood shall be kiln-dried to a moisture content of 10-12% and shall be free from warping, cracks, sapwood, insect infestation, and knots larger than 10 mm. Planks shall be machine-planed on all sides with tongue and groove joints or shiplap joints, if specified and fixed over a pre-installed wooden or metal framework using approved screws, nails, or concealed fasteners. The ceiling shall be polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish.Rate to include: (a) Supply of seasoned pine wood planks. (b) Surface treatment, polishing materials, and labor (c) Fixing hardware (d) Skilled labor, scaffolding, and all incidental worksNote: Framework will be paid separately. |
| 24 | M&L for 2nd class softwood Plain fillets 13 sqcm to 25 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed. |
| 25 | Dismantling of floor hearth or wall tiling/stone slab incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises complete all as specified and directed. |
| 26 | M&L for vitrified ceramic tiles 10mm thick (light shade, Square/ rectangular) polished area of each tiles exceeding n.exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 27 | M&L of wall cladding glazed ceramic tiles in vertical surfaces of size 350x250x7mm/ 450x300-350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing in to layer coat in cement mortar 1:4 complete all as specified and directed. |
| 28 | Demolition of Cement Concrete in ground floors and paving’s n exc 15 cm thickness (below or above ground level, complete all as specified and directed. |
| 29 | M&L for plain cement concrete 1:2:4, type B-1, using 20mm graded crushed stone aggregate as surface channel/drains, inside the manholes and the like incl Weathering, slightly rounded or chamfered angles and throating as directed including use and waste of necessary formwork complete all as specified and directed. |
| 30 | S&F RCC precast factory made type M-20 design mix MH covers with frame, size 1200x300x60mm etc., complete all as specified and directed. |
| 31 | Taking down CI/ PVC/ RCC pipe of any dia and description including all fitting complete all as specified and directed. |
| 32 | S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches/walls etc, complete all as specified and directed. |
| 33 | S&F PVC (SWR) bends any radius 110 mm complete all as specified and directed. |
| 34 | M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed. |
| 35 | M&L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set, complete all as specified and directed. |
| 36 | M&L for sand filling under floors, below paver blocks or in foundations including watering and consolidation, complete all as specified and directed. |
| 37 | M&L for coloured chequred cement conc tiles glossy finish (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 38 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in coping to paths/ steps/ parapet/ kerbs/ base of railing post etc., including necessary formwork, complete all as specified and directed. |
| 39 | S&F steel water tubing of 15 mm bore, medium grade galvanized, ISI marked with all fittings laid in floor with wall and on ceiling, complete all as specified and directed. |
| 40 | S&F steel water tubing of 20 mm bore, medium grade galvanized, ISI marked with all fittings laid in floor with wall, complete all as specified and directed. |
| 41 | M&L for PVC water storage tank 1000 Liter capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, 20MM Ball valves, high pressure of PTMT with, ISI marked complete all as specified and directed. |
| 42 | S&F in repair 15mm fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.Note : Weight of stop cock shall not be less than 0.575 Kg. |
| 43 | S&F in repair CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified and directed.Note : Weight of bib tap shall not be less than 0.575 Kg. |
| 44 | S&F in repair Chromium plated (CP) grating round 100/ 125 mm size, complete all as specified and directed. |
| 45 | S&F 600x450mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg Board or commercial plywood, fixed with aluminium angled frame and two CP MS hanging arrangements, complete all as specified and directed. |
| 46 | S&F vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed. |
| 47 | S&F PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall / floors or in trenches etc., complete all as specified and directed. |
| 48 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 meter mean radius built in CM 1:6, with necessary scaffolding etc., complete all as specified and directed. |
| 49 | M&L for brick work with sub class-\\"B\\" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed. |
| 50 | M&L for 15mm thick rendering on brick or concrete surfaces in CM 1:4 with finishing the surface even and smooth without using extra cement, complete all as specified and directed.Note: to use only Yamuna sand. |
| 51 | M&L for two coats of exterior emulsion paint, on new surface on walls, chajjas etc over a coat of primer of same manufacturers of as emulsion including necessary scaffoldings up to 12 mtr or more height, complete all as specified and directed. |
| 52 | M&L for vitrified ceramic tiles 10 mm thick of light shade (square/rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed with cement mortar 1:6, complete all as specified and directed. |
| 53 | M&L for 16-18 mm thick black granite stone slab of any type with table rubbed and polished, set in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 54 | M&L for 18-20 mm thick Machine cut Kota stone slab in flooring on treads, landing laid over 20mm thick cement mortar 1:4 screed jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed. |
| 55 | M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed. |
| 56 | CONSTRUCTION OF GARBAGE BIN as per Drg CE CHD ZONE STD - 1208 C, complete all as specified and directed. |
| 57 | M&L for coloured chequred cement conc tiles 30cmx30cmx25mm thick in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 58 | S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F stainless steel plate rack of size approx 750x 600x 250mm made out of 1.0 mm thick steel sheet after taking sown sink as existing at site complete all as specified and directed. |
| 60 | M&L for two coats of white wash incl preparation of old surfaces of ceiling, complete all as specified and directed. |
| 61 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick, dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:6) base, complete all as specified and directed. |
| 62 | M&L for vitrified ceramic tiles 10 mm thick of light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed with cement mortar 1:6, complete all as specified and directed. |
| 63 | M&L for coloured glazed ceramic tiles (300x450x7mm thick) in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:4 complete all as specified and directed. |
| 64 | M&L for 16-18 mm thick black granite stone slab of any type with table rubbed and polished, set in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. |
| 65 | M&L for 18-20 mm thick machine cut Kota stone slab in flooring on treads, landing laid over 20mm thick cement mortar 1:4 screed jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, complete all as specified and directed. |
| 66 | M&L for screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes to receiving the kota stone, complete all as specified and directed. |
| 67 | M&L for MS bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed |
| 68 | M&L for re-enforcement cement concrete 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in balcony, chajjas/ self's and similar work, complete all as specified and directed. |
| 69 | Formwork to chullah hoods, chajjas, selfs,troughs and similar items including edges, complete all as specified and directed. |
| 70 | M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate as in plinth protection finished surfaces even and smooth without using extra cement and joint will be filled by mix of 85/25 bitumen and sand, complete all as specified and directed. |
| 71 | S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long, complete all as specified and directed. |
| 72 | S&F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters with chowkhats, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, 4mm thick figured glass, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) etc complete including taking down of exiting frame with shutter complete all as specified and directed. |
| 73 | S&F of powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos, hinges type B-21, 100mm long (3Nos), anodised aluminum snap beading, screws etc in each door, complete all as specified and directed |
| 74 | M&L for two coats of oil bound distemper of old decorated plastered or unplastered surfaces of walls, chajjas, balcony, facias etc by brooming down or steel wire brusing,scraping down smoke soot , moulds, moss and efflorescent salts, trading oil and greasy spots etc. over a coat of alkaline resistant primer over a coat of birla white putty, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysSep 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender