Power Government Departments Closing in 25 days TDR #57374762

Tender For Procurement Of Different Alloy Ci Pipe Bends And Fittings Of U#3,4,5&6 Under Ahm-Ktps.

Issued by Government Departments · Medinipur East, West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Oct 2026
25 days left
EMD
60400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur East → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Tender for Procurement Of Different Alloy Ci Pipe Bends And Fittings Of U#3,4,5&6 Under Ahm-Ktps. , Combine Tube,8 Inch With 5 Inch Throat For Bottom Ash Hopper Pt.01,High Chrome Class-Iii,Bhn 550(Min) Additional Data: Required For U#3,4,5,6 Bottom Ash System , Bend,250 Nb 60Deg,Alloy Ci Bhn-450 Drg No.Dcm-061-503/2 Additional Data: With Ends Bevelled Required For U#4,5,6 Dry Ash System , Elbow,250 Nb 30Deg For Ash Conveying Line Drg No.Dcm-061-501/2 Additional Data: Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3 Bottom Ash System & U#4,5,6 Dry Ash System , Bend,300Nb 90Deg For Dry Ash Sy Matl,Drg No-526-40/416-01 Additional Data: Bend Radius:-900Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Dry Ash System And U#3 Slurry Lines. , Elbow,Alloy Ci,90Deg,350Nb,450Bhn For Fa Dry Conveying Linemoc- Ni-Chrome-Alloy Cast Iron, Min Hardness 450 Bhn Additional Data: Bend Radius:-1035Mmrequired For U#3,4,5,6 Dry Ash System And U#3Slurry Lines. , Elbow,400 Nbx90 Deg For Ash Disposal Pipe Additional Data:Bend Radius:-1200Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Slurry Lines , Elbow,Semi Sweep,8 Inch # Aloy Ci/Durite Bhn-450# For Air Separator Inlet/Outlet Additional Data:Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Wet Ash System , Elbow,250 Nbx45 Deg,Durite Fittings # Additional Data: Bend Radius:-750Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Bottom & Fly Ash System , Elbow,90 Deg,200Nb Indure Elbow,90 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,90 Deg,250Nb Indure Elbow,90 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Elbow,45 Deg,200Nb Indure Elbow,45 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,45 Deg,250Nb Indure Elbow,45 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Reducer,Size:250-200 Nb, For Ahp Ci Line Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450;Bhn,Drawing No:-I-5034-M-Ga-077Sheet 1 Of 1 Additional Data:Overall Length:-762Mm D1=232Mm,D2=274Mm Required For U#3 Fly Ash System , Reducer,Ci,Hydraulic Ejector Bottom Ash System Additional Data: Overall Length=500Mm D1=222Mm,D2=274Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5&6 Bottom Ash System , Bend,200Nb 45Deg For Dry Ash Sy Matl Additional Data:Bend Radius:-600Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Fly Ash System , Ci 3-Way Conn,250Nb special For Fly Ash Vacuum Line Additional Data: Overall Length=700Mm All Ends Are Bevelled Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Fly Ash System , Bolt Hx-Hd Hi Tensile M8x60 Pt ( Gr 10.9 )Lateral,250 X 250 X 250Nb 45° Y Additional Data: Overall Length=1000Mm Required For U#3,4,5&6 Fly Ash System

BOQ

Name of Work:- Procurement of different alloy CI pipe bends and fittings of U#3,4,5&6 under AHM-KTPS.
Sl. No. Item Description
1COMBINE TUBE,8 INCH WITH 5 INCH THROAT FORBOTTOM ASH HOPPERPT.01,HIGH CHROME CLASS-III,BHN 550(MIN)Additional Data:REQUIRED FOR U#3,4,5,6 BOTTOM ASH SYSTEM
2BEND,250 NB 60DEG,ALLOY CI BHN-450DRG NO.DCM-061-503/2Additional Data:with Ends BevelledREQUIRED FOR U#4,5,6 DRY ASH SYSTEM
3ELBOW,250 NB 30DEG FOR ASH CONVEYING LINEDRG NO.DCM-061-501/2Additional Data:MOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#3 BOTTOM ASH SYSTEM & U#4,5,6DRY ASH SYSTEM
4BEND,300NB 90DEG FOR DRY ASH SYMATL,DRG NO-526-40/416-01Additional Data:BEND RADIUS:-900mmMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#3,4,5,6 DRY ASH SYSTEM AND U#3SLURRY LINES.
5ELBOW,ALLOY CI,90DEG,350NB,450BHN FOR FA DRYCONVEYING LINEMOC- NI-CHROME-ALLOY CAST IRON, MIN HARDNESS450 BHNAdditional Data:BEND RADIUS:-1035mmREQUIRED FOR U#3,4,5,6 DRY ASH SYSTEM AND U#3SLURRY LINES.
6ELBOW,400 NBX90 DEG FOR ASH DISPOSAL PIPEAdditional Data:BEND RADIUS:-1200mmMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#4,5,6 SLURRY LINES
7ELBOW,SEMI SWEEP,8 INCH #ALOY CI/DURITE BHN-450# FOR AIR SEPARATORINLET/OUTLETAdditional Data:MOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#4,5,6 WET ASH SYSTEM
8ELBOW,250 NBX45 DEG,DURITE FITTINGS #Additional Data:BEND RADIUS:-750mmMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#4,5,6 BOTTOM & FLY ASH SYSTEM
9ELBOW,90 DEG,200NB INDUREELBOW,90 DEG,200NB,MOC:-NI-CHROME-ALLOY CASTIRON MIN HARDNESS 450 BHN,DRAWINGNO:-I-5034-M-GA-098 SHEET 1 OF 2Additional Data:BEND RADIUS:-621mmREQUIRED FOR U#3 FLY ASH SYSTEM
10ELBOW,90 DEG,250NB INDUREELBOW,90 DEG,250NB,MOC:-NI-CHROME-ALLOY CASTIRON MIN HARDNESS 450 BHN,DRAWINGNO:-I-5034-M-GA-098 SHEET 2 OF 2Additional Data:BEND RADIUS:-738mmREQUIRED FOR U#3 FLY ASH SYSTEM
11ELBOW,45 DEG,200NB INDUREELBOW,45 DEG,200NB,MOC:-NI-CHROME-ALLOY CASTIRON MIN HARDNESS 450 BHN,DRAWINGNO:-I-5034-M-GA-098 SHEET 1 OF 2Additional Data:BEND RADIUS:-621mmREQUIRED FOR U#3 FLY ASH SYSTEM
12ELBOW,45 DEG,250NB INDUREELBOW,45 DEG,250NB,MOC:-NI-CHROME-ALLOY CASTIRON MIN HARDNESS 450 BHN,DRAWINGNO:-I-5034-M-GA-098 SHEET 2 OF 2Additional Data:BEND RADIUS:-738mmREQUIRED FOR U#3 FLY ASH SYSTEM
13REDUCER,SIZE:250-200 NB, FOR AHP CI LINEMOC:-NI-CHROME-ALLOY CAST IRON MIN HARDNESS450;BHN,DRAWING NO:-I-5034-M-GA-077SHEET 1 OF 1Additional Data:OVERALL LENGTH:-762mmD1=232mm,D2=274mmREQUIRED FOR U#3 FLY ASH SYSTEM
14REDUCER,CI,HYDRAULIC EJECTORBottom Ash SystemAdditional Data:OVERALL LENGTH=500mmD1=222mm,D2=274mmMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#3,4,5&6 BOTTOM ASH SYSTEM
15BEND,200NB 45DEG FOR DRY ASH SYMATLAdditional Data:BEND RADIUS:-600mmMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#4,5,6 FLY ASH SYSTEM
16CI 3-WAY CONN,250NB SPLFOR FLY ASH VACUUM LINEAdditional Data:OVERALL LENGTH=700mmALL ENDS ARE BEVELLEDMOC:- NI-CHROME ALLOY CI,HARDNESS:-450BHN (MIN)REQUIRED FOR U#3,4,5,6 FLY ASH SYSTEM
17BOLT HX-HD HI TENSILE M8X60 PT ( Gr 10.9 )LATERAL,250 X 250 X 250NB 45° YAdditional Data:OVERALL LENGTH=1000mmREQUIRED FOR U#3,4,5&6 FLY ASH SYSTEM Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57374762
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 03-10-2026
Authority
Authority Name West Bengal Power Development Corporation Limited
Work Description Tender for Procurement Of Different Alloy Ci Pipe Bends And Fittings Of U#3,4,5&6 Under Ahm-Ktps. , Combine Tube,8 Inch With 5 Inch Throat For Bottom Ash Hopper Pt.01,High Chrome Class-Iii,Bhn 550(Min) Additional Data: Required For U#3,4,5,6 Bottom Ash System , Bend,250 Nb 60Deg,Alloy Ci Bhn-450 Drg No.Dcm-061-503/2 Additional Data: With Ends Bevelled Required For U#4,5,6 Dry Ash System , Elbow,250 Nb 30Deg For Ash Conveying Line Drg No.Dcm-061-501/2 Additional Data: Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3 Bottom Ash System & U#4,5,6 Dry Ash System , Bend,300Nb 90Deg For Dry Ash Sy Matl,Drg No-526-40/416-01 Additional Data: Bend Radius:-900Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Dry Ash System And U#3 Slurry Lines. , Elbow,Alloy Ci,90Deg,350Nb,450Bhn For Fa Dry Conveying Linemoc- Ni-Chrome-Alloy Cast Iron, Min Hardness 450 Bhn Additional Data: Bend Radius:-1035Mmrequired For U#3,4,5,6 Dry Ash System And U#3Slurry Lines. , Elbow,400 Nbx90 Deg For Ash Disposal Pipe Additional Data:Bend Radius:-1200Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Slurry Lines , Elbow,Semi Sweep,8 Inch # Aloy Ci/Durite Bhn-450# For Air Separator Inlet/Outlet Additional Data:Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Wet Ash System , Elbow,250 Nbx45 Deg,Durite Fittings # Additional Data: Bend Radius:-750Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Bottom & Fly Ash System , Elbow,90 Deg,200Nb Indure Elbow,90 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,90 Deg,250Nb Indure Elbow,90 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Elbow,45 Deg,200Nb Indure Elbow,45 Deg,200Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 1 Of 2 Additional Data: Bend Radius:-621Mm Required For U#3 Fly Ash System , Elbow,45 Deg,250Nb Indure Elbow,45 Deg,250Nb,Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450 Bhn,Drawing No:-I-5034-M-Ga-098 Sheet 2 Of 2 Additional Data: Bend Radius:-738Mm Required For U#3 Fly Ash System , Reducer,Size:250-200 Nb, For Ahp Ci Line Moc:-Ni-Chrome-Alloy Cast Iron Min Hardness 450;Bhn,Drawing No:-I-5034-M-Ga-077Sheet 1 Of 1 Additional Data:Overall Length:-762Mm D1=232Mm,D2=274Mm Required For U#3 Fly Ash System , Reducer,Ci,Hydraulic Ejector Bottom Ash System Additional Data: Overall Length=500Mm D1=222Mm,D2=274Mmmoc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5&6 Bottom Ash System , Bend,200Nb 45Deg For Dry Ash Sy Matl Additional Data:Bend Radius:-600Mm Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#4,5,6 Fly Ash System , Ci 3-Way Conn,250Nb special For Fly Ash Vacuum Line Additional Data: Overall Length=700Mm All Ends Are Bevelled Moc:- Ni-Chrome Alloy Ci,Hardness:-450Bhn (Min) Required For U#3,4,5,6 Fly Ash System , Bolt Hx-Hd Hi Tensile M8x60 Pt ( Gr 10.9 )Lateral,250 X 250 X 250Nb 45° Y Additional Data: Overall Length=1000Mm Required For U#3,4,5&6 Fly Ash System
Basic Detail
Tender No WBPDCL/KTPS/NIT/E4036/26-27
Bidding Type Tender
Location
City Medinipur East
State West Bengal
Key Dates
Publish Date 07 Sep 2026
Submission Date 03 Oct 2026
Open Date 08 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 60400
Exemption Available
Document List
BOQ_2555021.xls
c09a477f-e084-415d-9da7-20cf6bfa60ff.html
Tendernotice_1 (38).pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 25 days
Oct 08, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 30 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2555021.xls

html

c09a477f-e084-415d-9da7-20cf6bfa60ff.html

pdf

Tendernotice_1 (38).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders