Tender For Beautification Of Alipurduar Parade Ground Near Dooarskanya Administrative Building Under Alipurduar Municipality Within Alipurduar District In The Year 2026-27
Tender Value
91.60 Lakhs
Estimated cost
Bid Submission
21 Sep 2026
12 days left
EMD
1.83 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Beautification Of Alipurduar Parade Ground Near Dooarskanya Administrative Building Under Alipurduar Municipality Within Alipurduar District In The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.(a) Depth of excavation not exceeding 1,500 mm. |
| 3 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete(a) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. |
| 6 | STEEL REINFORCEMENT FOR RCC WORKProviding & laying TMT - Fe 500 bars conforming to IS : 1786/1139 including straightening, cutting, bending and binding / welding in position of steel reinforcement bars (SAIL, TISCO, RINL, JSW, Electrotherm) confirming to IS, to correct shape and size as per detailed drawings, specifications and approved bar-bending schedules, with correct size super fine micro concrete cover blocks and annealed binding wire (G.I.) of 18 gauge, spacer pieces as required etc. at all heights and leads complete as per the direction of Engineer-in-charge. Measurement of steel is strictly as per I.S. Code. No extra for bending will be permitted. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand(b) In superstructure, ground floor For Boundary Wall |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 10 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 11 | Finishing walls with ready mixed Premium acrylic emulsion paint( Company Depot ted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 12 | MS Fabrication workProviding, Fabricating & fixing in-position MS Agnle Doors/window frames, MS Grilles to Windows/openings, Balcony/Parapet Railings, MS Gratings, Frames, Guard bars, Ladder, Brackets, Compound Gates, Compound wall Railings/Grilles and other similar MS Fabrication works at all heights and locations with necessary lifts & lead, loading/unloading etc. complete as per approved design made out of MS flats, Square bars, Round Bars, Angles, Tees etc and anchoring the same to walls, Floor, RCC slab etc.using Nut, bolts, holdfasts, Anchor Fasteners etc. as required including two coats of enamel paint over a coat of Zinc Oxide primer complete. Rates to include necessary hardware, cutting / chasing floor, wall carefully and repairing the same to its original position, scaffolding, pulleys, painting of repaired surface complete as direcetd at site by the Engineer-in-Charge. |
| 13 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufactureOn Steel or other matal surface, (iv) Two coats (with any shade except white) |
| 14 | Neat Cement Punning |
| 15 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.For internal pathway |
| 16 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath,parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge |
| 18 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 19 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch,including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumenwashers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified |
| 20 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. |
| 21 | Supplying and stacking of sludge at site including royalty and carriageupto 5 km lead complete (sludge measured in stacks will be reducedby 8% for payment) |
| 22 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 23 | Providing, stacking and Displaying Acalypha red well developed with fresh & healthy 30 cm to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic Pot and as per direction of the officer-in-charge. |
| 24 | Plantation of Trees, Shrubs, Hedge, ground covers and seasonal plants at site i/c watering and removal of unsaverieable material’s as per direction of officer in charge (excluding cost of plant & water).Shrub plant |
| 25 | Shrubs Plant (944.35/200) 4.72 |
| 26 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysSep 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender