Tender For Construction Work Of The Parakram Theme Park At Badshah Park, Located In Bhedshah Bagh Colony.
Tender Value
50.64 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
2 days left
EMD
4.07 Lakhs
Bank guarantee accepted
Document Fee
4900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Work Of The Parakram Theme Park At Badshah Park, Located In Bhedshah Bagh Colony.
BOQ
| Sl. No. | Item Description |
| 1 | Parakram park (Badshah bagh varanasi) |
| 2 | Providing earth work in surface excavation not exceeding 30 cm depth for site clearing, removing debris, cutting vegetation, levelling and disposing surplus earth upto 50m lead, all complete |
| 3 | Providing and fabricating MS hollow section gate frame 75×75×4mm for main entrance military arch — fabrication, welding, grinding, 1 coat red oxide primer complete — weight approx 420 kg |
| 4 | 2 coats synthetic enamel paint on MS gate frame in military green + saffron powder coat finish, complete |
| 5 | Providing and fixing 2-leaf MS gate shutters 40×40×3mm angle frame with flat bar infill, hinges, tower bolts, latch, powder coated, complete |
| 6 | Providing and fixing 4mm ACP cladding panels with 'Parakram Park' laser cut lettering on MS angle frame 40×40×4mm, powder coated, silicon sealant at joints, complete — arch cladding and signage |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade — two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10 sqm, on existing boundary wall surface including preparation, crack filling with CM 1:3 complete |
| 8 | Providing and fixing 4mm ACP (Aluminium Composite Panel) sheets with high-resolution UV printed Army/Navy/Air Force/freedom fighter themed murals on MS angle frame 40×40×4mm, fixed to boundary wall with expansion fasteners, complete with weather sealant at joints |
| 9 | Providing and laying factory made chamfered edge cement concrete paver blocks 60 mm thick M-35 grade in required colour and pattern over 50 mm compacted bed of sand, compacting with plate vibrator, filling joints with sand, complete — Main pathway |
| 10 | Providing and laying factory made chamfered edge cement concrete paver blocks 80 mm thick M-35 grade in required colour and pattern over 50 mm compacted bed of sand, compacting with plate vibrator, filling joints with sand — Peripheral jogging track |
| 11 | Providing and laying factory made chamfered edge cement concrete paver blocks 60 mm thick M-35 grade in required colour and pattern over 50 mm compacted bed of sand, compacting with plate vibrator, filling joints with sand — Internal connecting pathways |
| 12 | Finishing with Epoxy paint (two or more coats) on concrete work at all locations — for existing RCC skating rink surface |
| 13 | Providing and laying plain cement concrete of mix M15 (1:2:4) — PCC slope correction topping avg 50mm thick on existing RCC skating rink surface, including cleaning, bonding agent application, laying PCC, finishing level and smooth, curing minimum 7 days complete |
| 14 | Providing and constructing RCC M20 perimeter drain channel 150mm wide × 150mm deep around skating rink perimeter including centering, shuttering, reinforcement, concrete M20, curing, fixing cast iron grating complete |
| 15 | Steel reinforcement for RCC work -- TMT bars Fe-500D including straightening, cutting, bending, placing and binding -- skating rink perimeter drain channel |
| 16 | Providing and fixing Tuflex garden fencing / HDPE hexagonal mesh net of green colour having weight 510 gm/sqm (+/- 8%) in width of 60 cm with bamboo of 90 cm length painted with green colour, fixed 30 cm below ground level and 60 cm above ground level, binded with 2 mm G.I. wire complete |
| 17 | Providing and laying 62 mm thick cement concrete flooring with concrete hardener topping — under layer 50mm thick C.C. 1:2:4 and top layer 12mm thick cement hardener mix 1:2 — Badminton court IPS flooring |
| 18 | Earth work in excavation by mechanical/manual means over areas exceeding 30 cm depth for badminton court floor preparation — cutting to formation level 300mm, dressing sides, disposal of excavated earth upto 50m lead |
| 19 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete — 150mm thick compacted sand sub-base layer under PCC bed for badminton court |
| 20 | Providing and laying plain cement concrete of mix 1:3:6 — 75mm thick PCC M10 bed for badminton court flooring, excluding cost of centering and shuttering |
| 21 | Providing court line marking with 40mm wide white epoxy paint lines — badminton court markings as per BWF specifications, including surface preparation complete |
| 22 | Providing and laying Kota stone slab flooring 25 mm thick over 20 mm average thick base of cement mortar 1:4, jointed with grey cement slurry mixed with pigment, including rubbing and polishing complete — amphitheatre/seating steps cladding around statue zone |
| 23 | Providing and laying reinforced cement concrete — 1:1.5:3 (M20) including centering and shuttering but excluding reinforcement — RCC M20 in semi-circular 3-tier amphitheatre steps |
| 24 | Steel reinforcement for RCC work — TMT bars Fe-500D including straightening, cutting, bending, placing in position and binding — amphitheatre steps |
| 25 | Centering and shuttering including strutting, propping etc. and removal of formwork — for stair/step soffit and risers of semi-circular amphitheatre steps |
| 26 | Providing and constructing RCC M20 walls and roof slab of drinking water kiosk — 1:1.5:3 concrete including centering, shuttering, curing, complete |
| 27 | Steel reinforcement for RCC work -- TMT bars Fe-500D including straightening, cutting, bending, placing in position and binding -- drinking water kiosk walls and roof slab |
| 28 | Brick work with common burnt clay FPS bricks class designation 7.5 in superstructure above plinth — CM 1:6 — kiosk walls 115mm thick |
| 29 | 12mm cement plaster on rough side — CM 1:4 — both faces of kiosk walls including smooth finish |
| 30 | Acrylic smooth exterior paint (2 coats + primer) on kiosk exterior walls and roof slab soffit |
| 31 | Brick work with common burnt clay FPS bricks class designation 7.5 in superstructure above plinth — CM 1:6 — kiosk walls 115mm thick |
| 32 | Synthetic enamel paint 2 coats on brick coping, MS planters and MS grill cover |
| 33 | Providing and laying Kota stone slab cladding 25mm thick over 20mm average base of cement mortar 1:4, jointed with grey cement slurry with pigment, including rubbing and polishing complete — statue pedestal cladding |
| 34 | Providing and laying reinforced cement concrete M20 — 1:1.5:3 including centering, shuttering but excluding reinforcement — RCC M20 statue pedestals 3 nos., each 915×915×915mm |
| 35 | Steel reinforcement for RCC work — TMT bars Fe-500D including straightening, cutting, bending, placing and binding — statue pedestals |
| 36 | Centering and shuttering including strutting, propping etc. and removal of formwork — for 3 nos. RCC statue pedestals |
| 37 | Providing and constructing RCC M20 foundation for Parakram Stambh pillar — 600×600×900mm including centering, shuttering, reinforcement, concrete M20, curing complete |
| 38 | Providing and fabricating MS hollow section pillar 100×100×4mm × 3.05m height with MS flat plate base 300×300×10mm, 700mm dia Ashok Chakra cutout from 6mm MS plate, 2 coats red oxide + powder coat finish, anchor bolts, complete |
| 39 | Providing and laying natural stone slab cladding 20mm thick on 4 faces of Parakram Stambh pillar on 15mm CM 1:3 base, including polishing and pointing complete |
| 40 | Supply and erection charges for custom Parakram Stambh elements, transportation, site supervision and final commissioning |
| 41 | Providing and laying reinforced cement concrete M20 — foundation for 12m flag post — 600×600×1200mm including centering, shuttering, curing complete |
| 42 | Steel reinforcement for RCC work -- TMT bars Fe-500D including straightening, cutting, bending, placing and binding, plus anchor bolt cage fabrication -- 12m flag post foundation |
| 43 | Applying 1 coat red oxide zinc chromate primer on existing/new MS work — flag post base flange and visible MS components |
| 44 | Applying 2 coats aluminium paint on MS/CI work — flag post visible portion above GL, base plate and accessories |
| 45 | Earth work in excavation by mechanical/manual means in foundation trenches not exceeding 1.5m width for semi-circular Shaheed Smarak Wall foundation and 3 RCC column pits, including dressing of sides, ramming of bottoms, disposal of excavated earth upto 50m lead, as directed |
| 46 | Steel reinforcement for RCC work — TMT bars Fe-500D including straightening, cutting, bending, placing in position and binding with annealed wire — strip foundation, column bases and 3 nos. RCC columns |
| 47 | Providing and laying RCC M20 in columns, pillars and struts above plinth level — 1:1.5:3 excluding centering, shuttering, finishing and reinforcement — 3 nos. RCC columns 230×230mm of Shaheed Smarak Wall |
| 48 | Centering and shuttering including strutting, propping etc. and removal of formwork for columns, pillars, piers — 3 nos. RCC columns of Shaheed Smarak Wall |
| 49 | Brick work with common burnt clay FPS (non modular) bricks class designation 7.5 in superstructure above plinth level in cement mortar 1:6 — 230mm thick semi-circular Shaheed Smarak Wall |
| 50 | 12mm cement plaster on rough side of single or half brick wall — 1:4 (1 cement:4 coarse sand) — both faces of semi-circular Shaheed Smarak Wall including RCC column faces, smooth finish |
| 51 | Providing and fixing 4mm PVDF-coated ACP with high-resolution UV digital printed patriotic/Shaheed themed murals — front face of Shaheed Smarak Wall — MS angle frame 40×40×4mm, silicon sealant, complete |
| 52 | Finishing walls with Acrylic Smooth exterior paint — 2 or more coats @ 1.67ltr/10sqm over priming coat — rear face of semi-circular Shaheed Smarak Wall |
| 53 | Providing and laying Kota stone slab coping 25mm thick on top of semi-circular Shaheed Smarak Wall — over 20mm average base of cement mortar 1:4, jointed with grey cement slurry, rubbing and polishing complete |
| 54 | Providing and fixing 18mm thick flamed/honed finish granite stone panels with laser engraved patriotic quotes on SS 304 stand-off M10 bolts ×40mm projection, silicon sealant, complete |
| 55 | Finishing walls with Acrylic Smooth exterior paint — 2 or more coats @ 1.67ltr/10sqm over priming coat — column flanks, plinth base band and coping edge sides of Shaheed Smarak Wall |
| 56 | Providing and fixing ACP (4mm PVDF grade) panels with UV digital printed gallantry medal/award displays — Param Vir Chakra, Maha Vir Chakra, Vir Chakra with descriptions, in MS angle frame 40×40×4mm fixed to boundary wall with expansion fasteners, complete with weather sealant |
| 57 | Providing and installing BIS/IS approved multi-play kids equipment set comprising: 2 nos. double-seat swings with galvanised MS A-frame and rubber seats; 1 no. poly-slide with stainless steel slide sheet; 1 no. see-saw with HDPE grip handles; 1 no. merry-go-round; all in HDPE/MS with powder coated finish, complete with anchor bolts |
| 58 | Providing and laying of Selection No. 1 Doob grass turf with earth 50mm to 60mm thickness, levelling, ramming, rolling, watering and maintenance for 30 days or more till grass establishes -- Kids Zone safety-grass surface under play equipment |
| 59 | Providing and laying of Selection No. 1 Doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools, than rolling the surface with light roller, light watering the same and maintenance for 30 days or more till grass establishes properly |
| 60 | Preparation of beds for shrubbery/flowering plants -- excavation 60cm depth, mixing manure/compost with excavated earth, refilling, watering and levelling complete |
| 61 | Supply and plantation of seasonal flowering plants (Marigold, Zinnia, Petunia, Salvia mix) in prepared beds near statue zone and entrance — 4-inch potted seedlings, transplanting in prepared beds, watering and 30 days maintenance, complete |
| 62 | Pruning, trimming, shaping of trees/shrubs (ht 15 feet and above) including removal of cut materials upto 50m lead as per direction of officer in charge — for existing Ashoka trees |
| 63 | Pruning, trimming, shaping of trees/shrubs (ht 15 feet and above) including removal of cut materials upto 50m lead as per direction of officer in charge — for existing large trees |
| 64 | Providing and fixing M.S. tree guard 45 cm square in plan, height 1.20 metre above ground level and 0.40 metre below ground level — vertical members 4 nos. angle iron 25×25×3mm 2.25m long welded to flat iron rings, name plate welded at middle height, fixed to ground with 4 legs 40cm long, painted 2 coats synthetic enamel paint of approved brand |
| 65 | Providing and laying armoured cable 2 core 2.5 sqmm from DB to spike uplight locations — 25mm PVC conduit with FR copper wire, junction box, including excavation, laying, refilling and testing complete |
| 66 | Providing, installing, testing and commissioning LED flood light fixture 50W, IP66 rated, 220V AC, 5700K cool white, aluminium body, wide angle 120° beam, for flag post uplighting, complete with armoured cabling |
| 67 | Providing and fabricating MS tubular pole 25mm dia x 1.2m height for bollard pathway light, base plate 100x100x6mm, 1 coat red oxide + 1 coat enamel paint, ground anchor, complete -- 62 nos. |
| 68 | Providing, installing, testing and commissioning mains-powered LED bollard pathway light fixture -- 10W LED, warm white, IP65, on pole per F-03(i), complete -- 62 nos. |
| 69 | Providing and laying armoured underground cable from DB to bollard pathway light locations, 25mm PVC conduit with FR copper wire, junction boxes, including excavation, laying, refilling and testing complete -- for 62 nos. bollard lights. |
| 70 | Supply and fixing of 12.5m High Mast Pole, hot-dip galvanised inside and outside, pole sheet 3mm, top dia min. 100mm, bottom dia min. 310mm, base plate 25mm thick, with head frame suitable for 6 luminaires and control gear boxes, 0.75 HP power tool motor, 3-point suspension system with 6mm dia steel wire rope, double drum winch, including making suitable foundation as per manufacturer's drawing along with foundation bolts, nuts, washers, anchor plates etc., complete — 4 nos. |
| 71 | Providing, installing, testing and commissioning LED high mast floodlight 100W, IP65, 220V AC, 5700K, with armoured cable connection from DB, complete — 4 nos. |
| 72 | Providing and laying reinforced cement concrete M15 foundation 350×350×600mm for LED garden pole light — including shuttering, curing, 4 nos. |
| 73 | Providing, installing, testing and commissioning LED garden pole light 30W, IP65, 220V AC, warm white, on 3.5m MS pole — 4 nos. |
| 74 | Providing and installing 10W LED lamp module with warm white 3000K, armoured underground cable connection from DB — 21 nos. bollard lights along boundary path |
| 75 | Earth excavation for underground armoured cable trenches — 300mm wide × 500mm deep for bollard light cabling including refilling and compaction |
| 76 | Providing, installing, testing and commissioning recessed LED step/walkover light, IP65, on amphitheatre risers, 42 nos. |
| 77 | Providing and fixing 8-way SPN distribution board with metal door, 8 nos. MCB (6A/10A/16A/32A mix), 63A 4-pole 30mA RCCB (Din Rail), single-phase electronic energy meter, mounted in sheltered alcove of MS post per G-03(i), complete |
| 78 | Finishing walls with Acrylic Smooth exterior paint of required shade in two or more coats over and including priming coat of exterior primer — on existing overhead water tank base/structure in patriotic colour scheme |
| 79 | Providing and fixing MS angle frame 40×40×4mm with GI chain link fabric mesh 50×50mm of 4mm dia wire around transformer enclosure, height 1.5m, including MS angle posts 40×40×4mm at 2m c/c embedded in concrete blocks 300×300×300mm, with lockable MS flat bar gate, 2 coats synthetic enamel paint, complete |
| 80 | Finishing walls with water proofing cement paint of required shade — two or more coats applied @ 3.84 kg/10 sqm, new work — on exterior of existing overhead water tank (d=77ft6in, H=80ft), including surface preparation, scaffolding if required, complete |
| 81 | Finishing walls with Acrylic Smooth exterior paint of required shade — two or more coats over priming coat of exterior primer — on existing operator room (26'×27'4'') including surface preparation, crack filling with CM 1:3, complete |
| 82 | Finishing walls with Acrylic Smooth exterior paint of required shade — two or more coats applied over priming coat of exterior primer — on existing electric panel room (9'9\\"×7'8\\" = 2.97m×2.34m), complete with surface preparation |
| 83 | Finishing walls with Acrylic Smooth exterior paint of required shade — two or more coats applied over priming coat of exterior primer — on existing gen-set room (4'7\\"×14'4\\" = 1.40m×4.37m), complete with surface preparation |
| 84 | Cleaning MS open gym equipment with wire brush, removing loose paint, rust and dirt — preparing surface for primer application, complete |
| 85 | Applying 1 coat red oxide zinc chromate primer on all MS members of open gym equipment after surface preparation, complete |
| 86 | Applying 2 coats synthetic enamel paint of approved shade on all MS members of open gym equipment including primer-coated surfaces, complete |
| 87 | Tightening loose bolts/nuts, oiling moving joints (chains, pivots, swivel), replacing damaged rubber grips on open gym equipment handles and foot pads, complete |
| 88 | Consolidated Market Rate Items (Non-Schedule) — FRP soldier statues (3 nos.); backlit entrance signage + park info/zone map board; park bench (5 nos., previously mis-cited to DSR Hort Item 2.19 which is actually \\"brick edging,\\" unrelated); dustbin (9 nos., previously mis-cited to Item 2.22 which is actually \\"excavation in bajri path,\\" unrelated). [Rev-13: the 8 nos. MS-fabricated elements and the 4 nos. high-mast poles previously bundled here have been removed from this line -- high-mast poles are now properly priced under F-04(i) using Item 651; the remaining 8 MS elements are now priced separately under MS-FAB-ITEMS using Items 10.1/10.2.] |
| 89 | Providing and fabricating 8 nos. bespoke MS elements -- badminton net posts (2 nos.), decorative planters (4 nos.), well grill cover, flag post base bracket + info board post + floodlight bracket, garden pole light posts (4 nos.), bollard bodies (25 nos.), DB mounting post -- welding, grinding, priming, complete, per weight basis |
| 90 | Add GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender