Tender for Tender for Construction Work Of Passenger Waiting Room Near Kalli Chauraha Of Development Block Gondlamau In Sitapur District.
Tender Value
10.55 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
2 days left
EMD
11000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sitapur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Passenger Waiting Room Near Kalli Chauraha Of Development Block Gondlamau In Sitapur District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work im surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as tsqm on plan including ing getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m. directed by Engineer-in-Charge: 2.1.1 All kinds of soul 10 to 0.30 M). DSR 2.1 (2.8.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR No. 4 1.8 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class 7 designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cernent: 6 coarse sand). DSR-6.1.2 |
| 4 | Reinforced cement concrete work in walls (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.2.2 |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR 5.22.6 |
| 6 | Filling available excavated earth (excluding rock) m trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. DSR 2.25A |
| 7 | Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similarlocations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. DSR 16.86.1 |
| 8 | 15 mm cement plaster on rough side of single or hall brick wall of mix 1.4 (1 cement: 4 fine sand) DSR 13.5.2 |
| 9 | Providing and Fixing of Stainless Steel (Grade 304) railling made of hollow tubes,channel,plates including drilling holes,revetting or welding where nessessary and also including supply of steel ….complete item DSR NO.10.28 |
| 10 | Supply and fixing of 25 mm dia &600 mm long bolt with nut with threading ………complete item. |
| 11 | supply and painting of deco paint over Stainless steel work such as spry painting all work roof to chair also including…………….complete item |
| 12 | Providing and Fixing A.C.P sheet 3 mm thick ,DSR-8.32 |
| 13 | Supply fixing & hoisting of retro reffective signage made of 2mm thick aluminium sheet face to be fully covered with appd. 3M or equilant high intensity grade encapsulted lense type of retro reffective pressure sensitive adhesive sheet/reat active sheeting in green colour the retro reflective sheeting shall be dully processedon aluminium sheet by heat lamp applicator or by H.S.R.A (Roller) boards are to be supplied along with fixing accessories complete as MORTH &HIRC-67 Specification. DSRno 16.60.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender