Tender For . Proposed Construction Of Divyang Inclusive Park At Lucknow In (Uttar Pradesh ).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Sep 2026
1 days left
EMD
10.88 Lakhs
Bank guarantee accepted
Document Fee
20965
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for . Proposed Construction Of Divyang Inclusive Park At Lucknow In (Uttar Pradesh ).
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment). |
| 3 | Carrigae of sludge upto 5 K.M. |
| 4 | Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm |
| 5 | Carrigae of manure upto 5 K.M. |
| 6 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. |
| 7 | Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge dump manure or/and good earth to be paid separately). |
| 8 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing, including removal of rubbish and surplus earth, if any with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately). |
| 9 | Holes 0.9 m dia. and 0.90 m deep. |
| 10 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).Trees Plant |
| 11 | Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. |
| 12 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge |
| 13 | Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25- 30 cm well developed in big size HDPE bags as per direction of the officer-in-charge. |
| 14 | Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. |
| 15 | Earth work in trenches for foundation for pipes.cable etc in oridinary soil incl. lift up to 1.5 m and lead upto50 m & dressing of dides & ramming the bottom & disposal of surplus earth as per direction of E/I |
| 16 | C.C. work with cement approved coarse sand and 40 mm gauge approved stone ballast in proportion of 1:2:4 incl. cost of form work in foundation & floor |
| 17 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting , hoisting, fixing in position andB+61 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Electric resistance or induction butt welded tubes.(75mm) |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc. including cutting , hoisting, fixing in position andB+61 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Electric resistance or induction butt welded tubes.(50mm) |
| 19 | Providing and laying cement concrete 1:2:4 (1 cement :2 coarse sand :a graded stone ballast 20 mm nominal size ) supply of all materials labour T & P etc . Required for proper completion of work and curing complete , including cost of form work in foundation and floors .For fixing of poles and struts |
| 20 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm wastage @ 5% |
| 21 | Painting 2 coats over one primer coat over new steel work including cost of all material and T&P etc required for proper completion of work |
| 22 | Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 24 | CIVIL WORKS NON-SOR ITEMS |
| 25 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 1520mm x 700mm.2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure 2 mm PVC flate edge banding lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 50 mm x 50 mm x 1.6mm thick.6. With Storage unit: H400mm x W450mm x D360mm. The storage unit shall be made of 18mm pre laminatedPLPB in the same shade as of table top.7. Back panel: Made of same material as top but shall be of 18mm thick .8. Locking arrangement: A suitable locking arrangement to be provided using precision locks.9. Handles : High quality SS handles are to be provided.10. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph except handles. PREMIUM WOOD & STEEL TABLE ( Make :-Swastik/Amardeep/Spactech) |
| 26 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1). Overall size Table Top: 1220mm L x 450mm W x 735 H2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure 2 mm PVC flate edge banding lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 50 mm x 25 mm x 1.6mm thick.6. With Storage shelf under top: The storage shall be made of 18mm pre laminatedPLPB in the same shade as of table top.7. Back panel: Made of same material as top but shall be of 18mm thick .8. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph. PREMIUM WOOD & STEEL TABLE ( Make :- Swastik/Amardeep/Spactech) |
| 27 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-SPECIFICATION1. Over all size - 830mm H x 410 mm W x 450mm D2. Top and sides Made of 25mm thick and 18mm thick respectivelyPLPB ISI mark with 2 mm PVC flate edge bandinging Laminate of 0.6 mm and side edge sealed with lipping3. Back Panel - Pre-laminated ISI mark 18mm thickPLPB and Key board tray with 2 mm PVC flate edge bandinged laminate of matching colour with inside white balancing colour.4.. Lipping - The edge banding shall be done by 2mm thick PVC tape by hot pressedmachine of Matching colour. ( Make :- Swastik/Amardeep/Spactech) |
| 28 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Specification:Overall dimensions:- W590mm x D630mm x H815mm Seat Height - 450mm Seat Size - W490mm x D430mm Back Size - W485mm x H450mma) Material: The seat and back shall be made of 12mm+1mm thick hot pressed ply and wood, upholstered with high quality fabric & molded polyurethane foam of 45-50kg/m3 density and 60mm thick. The foam shall have designed with contoured lumber support. Fabric cost Rs.300/mtr. app.b) Armrest: The armrest shall be made in one piece polyurethane reinforce with MS insert.c) Frame: The frame shall be made of CR tube 25x1.8 dia in cantilever shape reinforced at load bearing bands from inside.d) Back-ABS plastic cover.e) The overall appearance of the product shall be as per photograph ( Make :-Swastik/Amardeep/Spactech) |
| 29 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Specification:Overall size: L- 1775mm x D- 720 mm x H- 750 mm Seat height: 445mm, Seat Depth: 550mm.a) Steel perforated Seat and back rest on Tubular Structure. Nickel/ Chrome plated Handles, beading & base.b) Rectangular tube shall be of prime CRCA 80x40x1.6mm and seat & back shall be of prime CRCA 1.8mm. The total weight of the bench shall not be less than 30kgs.c) All steel components shall be epoxy powder coated after seven tanks anti corrosion pretreatment of surface.d) The overall appearance of the product shall be as per photograph. ( Make :-Swastik/Amardeep/Spactech) |
| 30 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 2100mm x 900mm.2. Height: 735mm3.Table Top : Stainless Steel 1.00 mm, 18mm thick Plywood under SS sheet.4. Under Structure : Tubular under structure made of superior quality tube of 38mm 32mm x 1.6mm thick.5. Shoes : Superior quality rubber shoes are to be provided.6. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.7. The overall appearance of the product shall be as per photograph PREMIUM STEEL TABLE ( Make :- Swastik/Amardeep/Spactech) |
| 31 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size : 825mm x 440mm.2. Height: 450mm3. 12 mm thick Plywood hot pressed.4. Under Structure: Tubular under structure made of superior quality CRMS tube of 20 mm5. Shoes : Superior quality rubber shoes are to be provided.6. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.PREMIUM WOOD & STEEL CHAIR ( Make :- Swastik/Amardeep/Spactech) |
| 32 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Over all size - 2440mm H x 600 mm D x 900mm W1. 7 Shelf Made of 1.20 mm thick Sheet.2.Legs : CRCA Pipe 38 x 18 x 1.6 mm thick. ( Make :- Swastik/Amardeep/Spactech) |
| 33 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 1520mm x 700mm.2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure 2 mm PVC flate edge banding lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 50 mm x 50 mm x 1.6mm thick.6. With Storage unit: H400mm x W450mm x D360mm. The storage unit shall be made of 18mm pre laminatedPLPB in the same shade as of table top.7. Back panel: Made of same material as top but shall be of 18mm thick .8. Locking arrangement: A suitable locking arrangement to be provided using precision locks.9. Handles : High quality SS handles are to be provided.10. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph except handles.PREMIUM WOOD & STEEL TABLE ( Make :- Swastik/Amardeep/Spactech) |
| 34 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 2400mm x 900mm.2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure postform lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 32mm x32mm x 1.2mm thick.6. Storage unit: H525mm x W450mm x D760mm. The storage unit shall be made of 18mm prelaminatedPLPB in the same shade as of table top.7. Back & Side panel: Made of same material as top but shall be of 18mm thick .8. Locking arrangement: A suitable locking arrangement to be provided using precision locks.9. Handles : High quality SS handles are to be provided.10. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph except handles. PREMIUM WOOD & STEEL TABLE ( Make :-Swastik/Amardeep/Spactech) |
| 35 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour.1. Over all size - 1800mm Wx450mm Dx750mm H1. Top and sides Made of 25mm thick and 18mm thickPLPB ISI mark respectiviely with 2 mm PVC flate edge bandinging Laminate.2 Lipping -The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour.3. Front Pannel - ISI mark 18mmPLPB with /Post formed laminate of Matching Colour.4. Back made of 12 mm thick commercial ply.5. Shelf made of 18 mm thick PLMDF Board.6. Appearance of the product should be as per the above ( Make :-Swastik/Amardeep/Spactech) |
| 36 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Over all size -900mm Wx450mm Dx750mm H2. Top and sides Made of 25mm thick and 18mm thick respectivelyPLPB ISI mark with 2 mm PVC flate edge bandinging Laminate of 1.8 mm and side edge sealed with lipping3. Back Panel - Pre-laminated ISI mark 18mm thickPLPB and Key board tray with 2 mm PVC flate edge bandinged laminate of matching colour with inside white balancing colour.4.. Lipping - The edge banding shall be done by 2mm thick PVC tape by hot pressedmachine of Matching colour. ( Make :- Swastik/Amardeep/Spactech) |
| 37 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall dimensions:- W590mm x D630mm x H815mm Seat Height - 450mm Seat Size - W490mm x D430mm Back Size - W485mm x H450mma) Material: The seat and back shall be made of 12mm+1mm thick hot pressed ply and wood, upholstered with high quality fabric & molded polyurethane foam of 45-50kg/m3 density and 60mm thick. The foam shall have designed with contoured lumber support. Fabric cost Rs.300/mtr. app.b) Armrest: The armrest shall be made in one piece polyurethane reinforce with MS insert.c) Frame: The frame shall be made of CR tube 25x1.8 dia in cantilever shape reinforced at load bearing bands from inside.d) Back-ABS plastic cover.e) The overall appearance of the product shall be as per photograph ( Make :-Swastik/Amardeep/Spactech) |
| 38 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall Size : Three seater.Size : 1680 W x 610 D (at base ) x 460/890a) Full Covered Cushioned with armsb) Seat foam 140mm / 50 density.c) Back foam 70mm 32 density. ( Make :- Swastik/Amardeep/Spactech) |
| 39 | enter Table Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall dimension:- L-1200 x W-600 x H-450mm a) Under structure shall be made of prime CRCA tube of 25 x 25 x 1.6mm.Epoxy Powder Coatded.c) Top shall be made of 18mm thick PLPB board texture finished or 12mm thick clean float glass.MAKE SPACTECH |
| 40 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall dimension:- L-600 x W-600 x H-450mma) Under structure shall be made of prime CRCA tube of 70 x 20 x 1.2mm.b) Top shall be made of 18mm thickPLPB texture finished or 12mm thick clean float glass. ( Make :- Swastik/Amardeep/Spactech) |
| 41 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-a) Size : 785 x 500 x 500 mm.b) Cushioned Seat Back & PU Arms.c) Five legs fitted with castor wheels.d) Tilting machine with hydrolic height adjustment. ( Make :-Swastik/Amardeep/Spactech) |
| 42 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-a) Size : 785 x 500 x 500 mm.b) Cushioned Seat Back & PU Arms.c) Five legs fitted with castor wheels.d) Tilting machine with hydrolic height adjustment. ( Make :-Swastik/Amardeep/Spactech) |
| 43 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall size: L- 1775mm x D- 720 mm x H- 750 mm Seat height: 445mm, Seat Depth: 550mm.a) Steel perforated Seat and back rest on Tubular Structure. Nickel/ Chrome plated Handles, beading & base.b) Rectangular tube shall be of prime CRCA 80x40x1.6mm and seat & back shall be of prime CRCA 1.8mm. The total weight of the bench shall not be less than 30kgs.c) All steel components shall be epoxy powder coated after seven tanks anti corrosion pretreatment of surface.d) The overall appearance of the product shall be as per photograph. ( Make :-Swastik/Amardeep/Spactech) |
| 44 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 1520mm x 700mm.2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure 2 mm PVC flate edge banding lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 50 mm x 50 mm x 1.6mm thick.6. With Storage unit: H400mm x W450mm x D360mm. The storage unit shall be made of 18mm pre laminatedPLPB in the same shade as of table top.7. Back panel: Made of same material as top but shall be of 18mm thick .8. Locking arrangement: A suitable locking arrangement to be provided using precision locks.9. Handles : High quality SS handles are to be provided.10. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph except handles.PREMIUM WOOD & STEEL TABLE ( ( Make :- Swastik/Amardeep/Spactech) |
| 45 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Over all size - 900mm Wx450mm Dx750mm H2. Top and sides Made of 25mm thick and 18mm thick respectivelyPLPB ISI mark with 2 mm PVC flate edge bandinging Laminate of 0.6 mm and side edge sealed with lipping3. Back Panel - Pre-laminated ISI mark 18mm thickPLPB and Key board tray with 2 mm PVC flate edge bandinged laminate of matching colour with inside white balancing colour.4.. Lipping - The edge banding shall be done by 2mm thick PVC tape by hot pressed machine of Matching colour. ( Make :- Swastik/Amardeep/Spactech) |
| 46 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall dimensions:- W590mm x D630mm x H815mm Seat Height - 450mmSeat Size - W490mm x D430mm Back Size - W485mm x H450mma) Material: The seat and back shall be made of 12mm+1mm thick hot pressed ply and wood, upholstered with high quality fabric & molded polyurethane foam of 45-50kg/m3 density and 60mm thick. The foam shall have designed with contoured lumber support. Fabric cost Rs.300/mtr. app.b) Armrest: The armrest shall be made in one piece polyurethane reinforce with MS insert.c) Frame: The frame shall be made of CR tube 25x1.8 dia in cantilever shape reinforced at load bearing bands from inside.d) Back-ABS plastic cover.e) The overall appearance of the product shall be as per photograph ( Make :- Swastik/Amardeep/Spactech) |
| 47 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-Overall dimension:- L-1820 x W-600 x H-950mma) Under structure shall be made of prime CRCA tube of 70 x 20 x 1.6 mm.b) Top Cushioned shall be made on 18mm plywood, Foam 50mm 40 density.c) Under storage Drawer+Cabinet Box. ( Make :- Swastik/Amardeep/Spactech) |
| 48 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-a) Size : 925 x 520 x 500 mm.b) Cushioned Seat Back & Arms.c) Five legs fitted with castor wheels.d) Tilting machine with hydrolic height adjustment. ( Make :-Swastik/Amardeep/Spactech) |
| 49 | Specification:- Providing and supplying internal Space fixed type furniture size and specification as below ;-1. Overall size Table Top: 1520mm x 700mm.2. Height: 735mm3. 2 mm PVC flate edge bandinged Table top : 25mm thickPLPB ISI mark with0.8 mm min. thick high pressure 2 mm PVC flate edge banding lamination and front side of drawer by 18mmPLPB at bottom.4. Lipping: The edge banding by tape 2 mm thick of same shade of laminated board, by hot process.5. Under Structure: Square Tubular under structure made of superior quality CRMS tube of 50 mm x 50 mm x 1.6mm thick.6. With Storage unit: H400mm x W450mm x D360mm. The storage unit shall be made of 18mm pre laminatedPLPB in the same shade as of table top.7. Back panel: Made of same material as top but shall be of 18mm thick .8. Locking arrangement: A suitable locking arrangement to be provided using precision locks.9. Handles : High quality SS handles are to be provided.10. Shoes : Superior quality rubber shoes are to be provided.11. Finish : Complete under structure to be powder coated after seven tanks anti corrosion treatment.12. The overall appearance of the product shall be as per photograph except handles.PREMIUM WOOD & STEEL TABLE ( Make :- Swastik/Amardeep/Spactech) |
| 50 | Specification:- Providing and supplying garden fixed type internal furniture size and specification as below ;-1. Visitor bench shall be suitable for three persons.2. Size: 1750mm (L) x 820mm (H) x 720mm (W) and Seat height 390mm from ground level.3. Material: Complete visitor bench shall be made of stainless steel grade 304.4. Seat & Back: Each seat & back shall be made of 1.6mm thick SS sheet uniformly perforated in single piece.5. Base Beam: Made of stainless steel grade 304 of size 60x40x2.0mm thick in single piece.6. Arms & Legs: Shall be made of stainless steel grade 304 pipe not less than2.00 mm thick.7. Wherever details not mentioned, the material used shall be of high quality for strengthen & better look of the product, as per standard practice.8. The seat shall be fitted on the base with the help of brackets.9. Fasteners shall be used of SS only. ( Make :- Swastik/Amardeep/Spactech) |
| 51 | ROUND TABLESIZE : 1100mm DIAMETER x 750mm HEIGHTTOP:- 25mm HDHMR BOARD WITH 1 MM MERINO LAMINATE AND 2mm PVC EDGE BINDSTRUCTURE:- 40mm X 40mm (1X1) SQURE PIPE 16 GUAGE MIG WELDED POWDER COATED RUBBER BUSHPP BUSH ( Make :- Swastik/Amardeep/Spactech) |
| 52 | ROUND FUFI CHAIR DIAMETER X HEIGHT SIZE:- 16’’ X 18’’SIZE:- 400mm X 450mm SHEET :-LEATHERATTE FABRIC WITH BOTTOM GOLD LETHERATTEFABRIC ( Make :- Swastik/Amardeep/Spactech) |
| 53 | Supply, installation, testing and commissioning of outdoor type Main LT Distribution Panel, floor-mounted, suitable for 415V, 3 Phase, 4 Wire, 50 Hz AC supply, fabricated from 2.0 mm thick CRCA sheet with powder-coated finish (minimum 80 microns), IP-54 weatherproof protection, complete with compartmentalized design, copper busbars of suitable capacity with heat-shrinkable sleeves, neutral and earth busbars, cable alley, gland plates, base channels, lifting hooks, danger notice, engraved polycarbonate name plates, internal PVC wiring, earthing terminals and all necessary hardware.250A TPN MCCB incomer with adjustable thermal-magnetic protection.Digital Multifunction Meter (Voltage, Current, kW, kVA, PF, Frequency & Energy).Digital Ammeter with CTs.Digital Voltmeter with selector switch.RYB LED indicating lamps.Phase selector switch.Copper busbars of suitable rating.Four outgoing MCCBs (100A/63A as required).Surge Protection Device (SPD), Control MCBs, auxiliary relays and terminal blocks.Suitable foundation with anchor fasteners.Complete interconnections, testing and commissioning. |
| 54 | Supply, installation, testing and commissioning of Outdoor Feeder Distribution Panel, wall/floor mounted, suitable for 415V, 3 Phase, 4 Wire, fabricated from 2.0 mm thick CRCA sheet, powder-coated finish, IP-54 weatherproof, complete with copper busbars, neutral and earth busbars, gland plates, cable termination, internal wiring, earthing terminals and all accessories.100A TPN MCCB incomer.4 to 8 outgoing MCB/MCCB feeders (16A to 63A as required).Digital Ammeter & Voltmeter.RYB phase indication lamps.Copper busbars.Neutral Link & Earth Bar.Cable glands and lugs.Terminal blocks.Danger plate and engraved name plate.Internal wiring with FRLS copper wires.Complete testing and commissioning.The feeder panels shall be used for:Garden & pathway lighting.Decorative lighting.Fountain & water pumps.Irrigation system.CCTV & security system.Public Address System.Signage lighting.Utility power sockets |
| 55 | LITHOPHONE and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below 8 tuned granite bars, ss base stone thickness 50mm size l- 1440mm x 1450mm |
| 56 | STORM DRUM OUTDOOR/INDOOR and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below ss painted drum with ss sping size 1450mm x 800mm |
| 57 | OCEAN SOUND DRUM and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below this installation creates surprise sound of rolling, gushing waves through gental rocking motion size l- 900mm x w-800mm |
| 58 | TAPTONG and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below - 9 ss tuned tubes vertical hanging this model is for paying with hand but we will give a flat mallet top portion will be in ss tube size 40mm size 1100mm |
| 59 | METALLOPHONE and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below - 8 tuned alluminium bar attached to sqare ss tubes resonance size l-660mm x w-470 |
| 60 | TUBULAR BELL and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below - 8 tuned ss bars with stans size h- |
| 61 | ELEMENT INSTRUMENTS and required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below - BRASS ALLUMINIUM COPPER stand ss pipe size h- |
| 62 | RAGA WINDCHIME nd required material and labour including transportation and necessary fixtures, civil work and work to be done as per the instruction of engineer incharge and specification given below - tuned alluminium bars wooden top tube dia 90mm size 1500mm |
| 63 | Supply & Installation of \\"PLAYFLEX®\\"/Melos/Gezolan EPDM Rubber Flooring system with thickness up to 20 mm consisting of sandwich two layers, base layer having 30mm Thickness would be made of Black Styrene-Butadiene Rubber Buffing and Top finished layer of 6mm would be made of Per-Oxide Size 1-4mm Ethylene Propylene Diene Monomer granules with 20% base polymer content, these granules to have gravity 1.6 kg/cm3, hardness Shore A value 60-65, Tensile Strength >4.0 Mpa and elongation @ Break to be >400%. These granules to be mechanically cut with proper sieve analysis. Raw material ingredients would be mixed with pale yellow colour Clear viscous liquid Poly-urethane Binder in 50 kg drum having NOC Content within permissible limit of 9.50 to 10.5%. Mixing ratio of Binder with weight of rubber material should not be less than 18%. The product should have HIC test from a renowned European Laboratory, According to EN 1177: 2017 method 1 standard, the Critical Fall Height (CFH) is 0.99M. Certified BY : Ebaco India |
| 64 | Supply, Installation, Testing & Commissioning of 60 Watt Outdoor Weatherproof Column/Horn Speaker, 100V line, IP-65 protection, complete with mounting bracket, hardware, testing and commissioning. |
| 65 | Supply, Installation, Testing & Commissioning of Professional UHF Wireless Microphone System comprising one receiver and one handheld microphone, operating range up to 100 m, complete with accessories. |
| 66 | Supply, Installation, Testing & Commissioning of Dynamic Wired Microphone with 5 m shielded cable, on/off switch and microphone holder, complete as required. |
| 67 | Supply, Installation, Testing & Commissioning of 3200 Watt Digital PA Power Amplifier, 100V line output, rack mount type, with overload, short-circuit and thermal protection, complete with all accessories. |
| 68 | Supply of Digital Audio Player with USB, SD Card, Bluetooth, FM and AUX input, suitable for PA system, complete with remote control and accessories. |
| 69 | Supply and laying of 2 Core × 2.5 Sq.mm Copper Speaker Cable, FRLS PVC insulated, complete with laying, dressing, fixing and termination (90 m per roll). |
| 70 | Providing all Connectors, Junction Boxes, Terminal Blocks, Cable Glands, Lugs and Accessories required for complete installation of PA System. |
| 71 | Installation, Wiring, Testing & Commissioning Charges including cable dressing, speaker mounting, amplifier installation, microphone setup and complete system integration. |
| 72 | Supply, Installation testing and commissioning of the IP dome camera shall be equipped with a 1/2.8 2 MP progressive scan CMOS imager to capture full HD 1080p (25/30 fps) images, a 2.8 -12 mm verifocal lens, and a waterproof (IP66) enclosure. As a true day/night solution, the camera shall use smart IR technology and provide up to 98 ft (30 m) of IR illumination. The camera shall accept PoE (802.3af) or 12 V DC power input. min. illumination:-0.1 lux @F1.2, AGC ON, 0 lux with IR video compression :- H.264, noise reduction: 3DNR,backlight compensation :- BLC/HLC/DWDR, encode mode:- CBR/VBR (freely adjustable in CBR, 5 levels in VBR). |
| 73 | Supply, installation testing and commissioning of 4CH network video recorder with real-time recording: up to 4 MP resolution live view, preview and playback/up to 4 channels at 1080p,withinbuilt PoE, up to 1TB supports complete with UL certification |
| 74 | Supply, installation testing and commissioning of 8 port PoE switch with 2 SFP ports, having security features like port security supports 64 MACs per port, auto surveillance VLAN, loopback detection automatically disables a port when a loop is detected, cable diagnostics allows administrators to determine cable status, UTP cat. 5, cat. 5e (100 m max.), full/half-duplex for 10/100 MBPS, full-duplex for 1000 MBPS, auto MDI/MDIX adjustment for all twisted-pair ports, switching capacity, 40 GBPS, maximum 64 bytes packet forwarding rate, 14.88 MBPS, ports 1 to 8 compliant with 802.3at |
| 75 | Providing &fixing of 2 TB hard disk |
| 76 | Supply, installation, testing and commissioning of 32\\" flat LED colour monitors. |
| 77 | Supplying and drawing 4 pair un-shielded twisted pair (UTP), 0.5 mm PVC insulated copper conductor un-armoured Cat-6 computer cable FRLS in existing surface/concealed, steel/PVC. conduit/ casing-n-capping as required. |
| 78 | Supplying and fixing PVC conduit ISI marked FRLS along with accessories on surface etc. as required PVC conduit 25 mm. (MMS) |
| 79 | Supply and fixing PVC conduit ISI marked FRLS along with the accessories in concealed system etc. as required PVC. conduit 25 mm (HMS) |
| 80 | 65\\" TV -Supply , installation , testing & commissioning of L.E.D. Television ( 4K l.E.D Disply OS webos/Android or equivalent , iminimum 60 Hz refresh rate Min 20 w speaker , wifi / blutooh enabledTypical brightness of 350 nits, Dynamic Contrast Ratio 400,000:1, X1 Processor, Android TV with 16GB storage, Installation Flexibility with 16/7 operation time , portrait & tilt mode Screen Mirroring thru Apple Airplay & Chromecast Simple Pro Settings Menu for customized solutions requirement by different applications, Direct LED with HDR10 & HLG compatibility, minimun 3 HDMI & 2 USB port , I/c remote and wall /table top accessories) ( Make:- Only Sony Professional Display ) Surya /trilux /Jaguar |
| 81 | Providing and fixing Braille Pad made from 2 mm thick anodized aluminium sheet, complete with embossed Braille dots and raised tactile lettering (English/Hindi as approved), fixed on the existing signage stand using stainless steel screws/industrial adhesive. The tactile letters shall have a minimum raised height of 1.0–1.5 mm, with UV-resistant, weatherproof, corrosion-resistant finish. The size of the Braille pad shall be 14\\" × 16\\" (355 × 405 mm) or as directed by the Engineer-in-Charge. The item shall include all materials, fabrication, embossing, engraving, fixing, and all incidental works complete in all respects. |
| 82 | Providing, fabricating, supplying and fixing Stainless Steel (SS-304) Box Letters for the text \\"DIVYANG PARK\\", fabricated from Grade SS-304 stainless steel with mirror/satin finish, having a letter height of 300 mm (30 cm) and minimum 50 mm depth, made from 1.2 mm thick SS-304 face and 1.0 mm thick SS-304 return, complete with internal MS/SS stiffeners as required. The letters shall be laser-cut, TIG welded, ground, polished, and fixed to the supporting surface using SS studs, anchor fasteners, spacers, templates, and all necessary accessories to achieve proper alignment. The item shall include all labour, materials, transportation, installation, and making good complete in all respects. |
| 83 | Providing, fabricating, supplying and fixing Internal Garden Glow Sign Board made of 3 mm thick ACP panel with 3D acrylic raised letters and internal LED illumination, complete with weatherproof LED modules, electronic driver, wiring, and all accessories. The sign board shall be supported on a powder-coated MS frame with necessary brackets, anchor fasteners, and foundation/fixing arrangement as required. The board shall display directional, identification, or information signage as approved by the Engineer-in-Charge. The complete unit shall be weather-resistant, UV-stable, and suitable for outdoor garden use. |
| 84 | Supply of customized SS 304 Grade Braille Directional Buttons of size 50 mm × 40 mm, manufactured from 2.0 mm thick stainless steel sheet with satin/matte finish, incorporating raised tactile symbols, Grade-1 Braille dots, and laser-engraved text indicating LEFT, RIGHT, and STOP. The buttons shall have smooth rounded edges, be corrosion-resistant, weatherproof, and suitable for indoor and outdoor use in accessible public facilities. Complete as per approved design and Universal Accessibility Guidelines. |
| 85 | Fixing of posts and wire mesh |
| 86 | • The construction joints shall be provided by groove cutting of size 4 mm x 20 mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) |
| 87 | Supply, Installation, Testing & Commissioning (SITC) of 5 kVA Online UPS System suitable for 230 V, Single Phase, 50 Hz AC input and output, true online double conversion technology with DSP/Microprocessor based control, IGBT technology, minimum 0.9 output power factor, efficiency not less than 90%, pure sine wave output, automatic static bypass, intelligent battery charger, overload, short circuit, surge, over-voltage, under-voltage, battery deep discharge and reverse polarity protection, complete with LCD display indicating input/output voltage, current, frequency, battery status, load percentage and fault indication. The UPS shall be complete with maintenance-free VRLA/SMF battery bank of suitable voltage and capacity to provide minimum 2 hours backup at rated load, powder-coated heavy-duty MS battery rack, battery interconnecting copper links, DC isolator, battery fuse, input and output MCCBs, copper cable connections, earthing terminals, cable glands, cable lugs, danger notice, engraved name plate, foundation bolts, anti-vibration pads, internal wiring and all accessories.The item shall also include transportation, loading, unloading, installation, alignment, connection with existing electrical system, testing under full load, commissioning, trial run, submission of test certificates, operation & maintenance manuals and complete documentation.The UPS shall be capable of providing uninterrupted power supply to three (03) High Mast LED Lighting Systems, emergency landscape lighting and associated electrical control equipment.The work shall be complete in all respects as per the specifications, approved drawings and directions of the Engineer-in-Charge. |
| 88 | Supplying and stacking of good earth specific useful for plantation at site including royalty if any and carriage (earth measured in stacks will be reduced by 20% for payment). |
| 89 | Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge. |
| 90 | Preparation of mounds of various size and shape by available excavated /supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of Each layer, dressing etc. lead upto 50 metre and lift upto 1.5 m complete as per direction of Engineer-in-Charge. |
| 91 | Grassing with Selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately): With grass turf |
| 92 | Flooding the ground with water including making kiaries and dismantling the same. |
| 93 | Bahunia Tomentosa, Beloperone Species, Caselpinnia Pulcherima, Bird of Paradise, Callandra Emarginata, Callandra Hybrida, Cassia Bi flora, Cassia Laevigata, Cestrum Nocturnum, Dombeya Mastersii, Euphorbia Caracasana, Euphorbia Pulcherima, Excorea bi color, Excorea tri color, Ficuas Blackii, Ficus Reginold, Ficus Panda, Gardenia, Gulphinia, Jasminoides, Hamelia Pattens, Heliconia, Hibiscus Rosasinensis, Hibiscus Verigated, Hibiscus Viceroy, Jatropha Multifida, Largestomia Indica, Malpighia Coccigera, Murraya Exotica, Murraya Koeniggi, Murraya Sambucum, Mussaenda Erythrophylla, Nerium Oleander, Nyctanthus Arbortristis, Plumbego Capensis, Putranjeeva Roxburghii, Tabernaemontana Coronaria, Tabernaemontana Divaricata, Tecoma Gaudi Chaudi, TecomaStans, Thevetia Nerifolia, Thuja Compacta and equivalent plants. |
| 94 | Allamanda Cathartica, Allamanda Grandiflora, Allamanda Violacea, Begnonia Venustha, Boughan Villas (Variety : Butiana, Lady Mary Bearing, Mahaara, Mohan, Scarlet Queen Variagata, Glabra Formosa, Peruviana Odissi, Partha, Shubhra, Thimma, Spectabillis, L.N. Birla, Refulgens), Clerodendrum Splendens, Clerodendrum Thompsonae, Ipomea Purpurea, Jasminum Grandiflorum, Jasminum Humile (Yellow), Passiflora Caerulea (Rakhi Bel), Petrea Volubilis, Quis Qualis Indica, Tecoma Grandiflora, Veronia Elaegnifolia (Curtain Creeper), Mandvellia, Garlic Creeper, Callimitis |
| 95 | Alpinia Verigated, Alternanthera species, Aspyragus Myerri, Aspyragus Springenii, Aspidistra, Canna (regular, Dwarf), Chlorodendron Inermii, Chlorophytum (Green), Chlorophytum verigated, Coffea Chinensis, Dianella Verigated, Durranta (Goldiana, Green, Verigated), Euphorbia Milli hybrid, Ipomea (Golden leaves), Iresine herbstii, Juniper Prostata, Juniper Africana, Ophiopogon plant, Ophiopogon jaburan, Portulacaria Afra (jade Plant), Schefflera Green, Schefflera verigated, Setcreasea Purpurea, Syngonium (Butterfly) species, Syngonium miniature, Syngonium Dwarf, Syngonium variegated, Tradescantia, Wadelia Trilobata, Zebrina Tradescantia, Pendanas, Spider Lily Black, Spider Lily verigated, Aclypha (Red, Green,Mini), Lantana (Red, Yellow, Purple, White, verigated), Haemalia Mini and similar plants. |
| 96 | Any of one from Alyssum, Anemone, Antirrhinium Hybrid, Aster Hybrid, Begonia and its different varieties, Calendula, Carnation,Coleus, Daisy, Dianthus, Fressia, Gazania, Impatiens, Kalanchoe, Marigold Inca, Missam branthemum, Nemasia, Nasturitium, Ornamental Kale, Pansy Hybrid Sakata, Petunia Hybrids such as Bravo, Star and Picotee, Salvia, Stock, Stock, Verbena |
| 97 | Any of one from Celosia, Caladium Hybrid, Cockscomb, Cosmos, Gaillardia, Gomphorena, Kochchea, Portulacca, Sunflower Hybrid, Sunflower Single, Tapiocca Variegated (Manihot Esculenta), Vinca, Zinnia Hybrids. |
| 98 | Plant Creeper Rose Varieties |
| 99 | Standard Roses H.T. Variety |
| 100 | Half brick circular tree guard in bricks, internal diametre 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 sand) and the intermediate courses being in dry honey comb masonry as per design complete: |
| 101 | Fly ash bricks |
| 102 | Providing of rotomoulded planters of square shape of different sizes. 40cm x 40 cm x 37cm |
| 103 | Providing of rotomoulded planters of square shape of different sizes 50cm x 50cm x 45cm |
| 104 | Providing and fixing of 3 seater stone bench made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1500mm, width 600mm, legs height 500 mm, back support height 500mm. |
| 105 | Providing and fixing of stone table made of 75mm thick stone slab finished by different numbers of ambry stone and two coats of 124 no sealer coat to prevent from weather including fixing on a pedestal (cost of pedestal to be paid separately)etc. complete as per direction of engineer in charge. Size: length 1000mm, width 600mm, legs height 750 mm. |
| 106 | Preparing instant Lawn:- Excavating the ground to a required depth of 20cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planting selection No. 1 variety of lawn grass as directed & maintaining till well established or three months by watering, weeding, clipping, rolling etc complete. |
| 107 | Preparing Shrubbery:- Excavating the ground to required depth of 30cms, removing & covering unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure thoroughly well, levelling, watering on previous night. Planting well developed shrubs plant 0.5 mtrs. Apart as directed & maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete. |
| 108 | Planting medium flowering/shady trees (Ht. 2 mtr.) :-Digging pit with size 0.9mX0.9mX0.9m, removing & converying unwanted stuff to a required distance as directed. Filling the pit with approved excavationed material upto a height of 0.30m. & remaining height of 0.60m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering previous night, planting two to three years old minimum 2.0Mtr. height, Bag size 13” X 13” healthy trees sapling as per specifications. Maintaining till well established or three months by watering, weeding, stirring of soil replacing of casualties etc. complete. |
| 109 | Planting large flowering/shady trees (Ht. 4 mtr.) :-Digging pit with size 0.9mX0.9mX0.9m, removing & converying unwanted stuff to a required distance as directed. Filling the pit with approved excavationed material upto a height of 0.30m. & remaining height of 0.60m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, as directed, watering previous night, planting two to three years old minimum 2.0Mtr. height, Bag size 21” X 21” healthy trees sapling as per specifications. Maintaining till well established or three months by watering, weeding, stirring of soil replacing of casualties etc. complete. |
| 110 | Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 150/150 Ltrs/hr |
| 111 | Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender