Tender For Construction Work Of Rain Shelter At A Public Place Near The Sports Ground (Birbal Meghar Singh) In Vikash Khand Bhadaura Gram Panchayat Gahmar.
Tender Value
11.60 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
4 days left
EMD
23200
Bank guarantee accepted
Document Fee
677
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghazipur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Rain Shelter At A Public Place Near The Sports Ground (Birbal Meghar Singh) In Vikash Khand Bhadaura Gram Panchayat Gahmar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead puto 50 m and for all lift, as directed by Engineer-in- Charge: All kinds of soil. AS per DSR 2.6.1 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutering- All work up to plinth level : 1:5:10 ( 1 cement : 5 fine sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). As per DSR Code 4.1.11 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR Code 6.1.2 |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement :1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR No. 5.2.2 |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR No. 5.3 |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR 5.3 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. As per DSR Code 5.9.6 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Lintles, beams, plinth beams, griders, bressumers and cantilevers with water proof ply 12 mm thick. As per DSR Code 5.9.21 |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick. As per DSR Code 5.9.20 |
| 10 | Provoiding and fixing of Box type fane hook (minimum10cm dia) width & i/c fixing of 12mm dia plain baar in position as per NBO 11.22 |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. As per DSR Code 5.22.6 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR Code 6.4.2 |
| 13 | 12 mm thick plaster on the plane side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand). As per DSR Code 13.1.2 |
| 14 | 15 mm thick plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand). As per DSR Code 13.2.2 |
| 15 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. As per DSR No 2.25 |
| 16 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. As per DSR No11.3.1 |
| 17 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of seze 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per DSR No. 10.31 |
| 18 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISi marked Stainless Steel butt hinges with necessary screws. As per DSR No. 9.20.2 |
| 19 | Finishing walls with water proof cement paint of approved make and quality on new work with two or more coats applied @ 3.84 kg/10 sqm to give an even shade including supply of all materials labour and tools and plants etc.required for proper completion of the work As per D.S.R. Code No. 13.44.1 |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. As per DSR No. 13.62.1 |
| 21 | Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) Size 125x65x2.12 mm As per DSR No. 9.57.1 |
| 22 | Providing and fixing ISi marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS : 1378) 200x10 mm As per DSR No. 9.63.2 |
| 23 | Providing and fixing ISi marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS : 1378) 100x10 mm As per DSR No. 9.63.4 |
| 24 | Providing and fixing ISi marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 300x16 mm As per DSR No. 9.62.1 |
| 25 | Providing and fixing ISi marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) size 125 mm As per DSR No. 9.66.1 |
| 26 | Providing and fixing brighy finished brass hanging type floor door stopper with necessary screws, etc. complete. As per DSR No. 9.82 |
| 27 | Supply and fixing of Lokarpan stone or Signboard at site Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender