Tender For Supply Of Different Type Of Materials Under Itahar Development Block ( 12 Nos. Gps)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Sep 2026
4 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Uttar → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Different Type Of Materials Under Itahar Development Block ( 12 Nos. Gps)
BOQ
| Sl. No. | Item Description |
| 1 | Hire charges of Coaltar Boiler 900 to 1400 litres |
| 2 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 3 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
| 4 | Hire charges of Derrick monkey rope |
| 5 | Hire charges of Pump set of capacity 4000 litres/hour |
| 6 | Vibrator (Needle type 40 mm) |
| 7 | Machine for rubbing of floors |
| 8 | pin vibrator |
| 9 | Surface Vibrator |
| 10 | Hot Bitumen Mixer 0.5cum i/c hand cart |
| 11 | Generator 250 KVA |
| 12 | Tractor with trolley |
| 13 | Water tanker 5000 Ltr. Capacity |
| 14 | Concrete joint cutting machine |
| 15 | Vibratory roller 8 to 10 tonne |
| 16 | Tandem Road Roller |
| 17 | Generator 250 KVA |
| 18 | Generator 100 KVA/125 |
| 19 | Hire charges of TATA 407 or equivalent for local shifting |
| 20 | Hire Charges of Drill machine upto 30 mm dia |
| 21 | Seam bolts and nuts 6 mm dia and 25 mm long |
| 22 | Fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick |
| 23 | Fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge |
| 24 | Fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge |
| 25 | Fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge |
| 26 | Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips |
| 27 | Fibre (high impact poly propelene reinforced) cement corrugated apron piece |
| 28 | Fibre (high impact poly propelene reinforced) cement eaves filler piece |
| 29 | Fibre (high impact poly propelene reinforced) cement north light curves |
| 30 | Non-Asbestos fibre (high impact poly propelene reinforced) cement ventilator curves |
| 31 | Fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick |
| 32 | Fibre (high impact poly propelene reinforced) cement ridge finial |
| 33 | Fibre (high impact poly propelene reinforced) cement special north light curves |
| 34 | Fibre (high impact poly propelene reinforced) cement S type louvers |
| 35 | Multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick |
| 36 | Multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick |
| 37 | 6 mm thick heavy duty fiber cement board |
| 38 | 8 mm thick heavy duty fiber cement board |
| 39 | 9 mm thick heavy duty fiber cement board |
| 40 | 12.5 mm thick Gypsum plaster board |
| 41 | 6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 42 | 8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 43 | Brick Aggregate (single size):63 mm nominal size |
| 44 | Brick Aggregate (single size):50 mm nominal size |
| 45 | Brick Aggregate (single size):40 mm nominal size |
| 46 | Stone Aggregate(single size):63 mm nominal size |
| 47 | Stone Aggregate(single size):50 mm nominal size |
| 48 | Stone Aggregate(single size): 40 mm nominal size |
| 49 | Stone Aggregate(single size):25 mm nominal size |
| 50 | Stone Aggregate(single size):20 mm nominal size |
| 51 | Stone Aggregate(single size): 12.5 mm nominal size |
| 52 | Stone Aggregate(single size): 10 mm nominal size |
| 53 | Stone Aggregate(single size): 06 mm nominal size |
| 54 | Safeda ballies 125 mm diameter |
| 55 | Bajiri |
| 56 | Bamboo 25 mm dia 2.5 meter long |
| 57 | Bhusa |
| 58 | Paving bitumen of grade VG 10 of approved quality |
| 59 | Bitumen emulsion |
| 60 | Bitumen grade PMB - 40 |
| 61 | Blown type petroleum bitumen of penetration 85/25 of approved quality |
| 62 | Bitumen hot sealing compound : grade A |
| 63 | Bitumen solution primer of approved quality |
| 64 | Premoulded joing filler 12 mm thick |
| 65 | Bitumen felt fibre base (vegetable or animal): Type 2 grade 1 |
| 66 | Bitumen felt as per IS 7193 Grade II |
| 67 | Bitumen felt : Type 3 grade 1 |
| 68 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
| 69 | Coal Tar |
| 70 | Brick bats |
| 71 | Wire brush |
| 72 | Soft brush |
| 73 | Portland Cement |
| 74 | White cement |
| 75 | Coal (steam) |
| 76 | Brass tower bolt (barrel type) 250x10 mm |
| 77 | Brass tower bolt (barrel type) 200x10 mm |
| 78 | Brass tower bolt (barrel type) 150 x 10 mm |
| 79 | Brass tower bolt (barrel type) 100 x 10 mm |
| 80 | Brass handles 125 mm with plate 175x32 mm |
| 81 | Brass handles 100 mm with plate 150x32 mm mm |
| 82 | Brass handles 75 mm with plate 125x32 mm |
| 83 | Brass door latch 300x16x5x mm (0.380 kg) |
| 84 | Brass door latch 250x16x5 mm (0.350 kg) |
| 85 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
| 86 | Brass 150 mm floor door stopper (0.357 kg) |
| 87 | Brass hard drawn hooks and eyes 300 mm |
| 88 | Brass hard drawn hooks and eyes 250 mm |
| 89 | Brass hard drawn hooks and eyes 200 mm |
| 90 | Chromium plated Brass butt hinges (heavy) type 75x65x4 mm (200 gms) |
| 91 | Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm |
| 92 | Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm |
| 93 | Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm |
| 94 | Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm |
| 95 | Chromium plated Brass handles 125 mm with plate 175x32 mm |
| 96 | Chromium plated Brass handles 100 mm with plate 150x32 mm |
| 97 | Chromium plated Brass handles 75 mm with plate 125x32 mm |
| 98 | Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles |
| 99 | Chromium plated brass casement window fastener |
| 100 | Chromium plated Brass Night latch |
| 101 | Chromium plated Brass Wardrobe Knob 50 mm |
| 102 | Chromium plated Brass Screws 50 MM |
| 103 | Chromium plated Brass screw 40 mm |
| 104 | Chromium plated Brass screws 30 mm |
| 105 | Chromium plated Brass screws 25 mm |
| 106 | Chromium plated Brass screws 20 mm |
| 107 | C. P. Brass Extension Nipple (1/2\\"x2\\" size) |
| 108 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 109 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 110 | Bright finished or black enameled mild steel screws 50 mm |
| 111 | Bright finished or black enameled mild steel screws 40 mm |
| 112 | Bright finished or black enameled mild steel screws 30 mm |
| 113 | Bright finished or black enameled mild steel screws 25 mm |
| 114 | Bright finished or black enameled mild steel screws 20 mm |
| 115 | Bright finished or black enameled mild steel bolts and nuts 50x6 mm |
| 116 | Oxidised mild steel butt hinges 125x65x2.12 MM |
| 117 | Oxidised mild steel butt hinges 100x58x1.90 mm |
| 118 | Oxidised mild steel butt hinges 75x47x1.70 mm |
| 119 | Oxidised mild steel butt hinges 50x37x1.50 mm |
| 120 | Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm |
| 121 | Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm |
| 122 | Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm |
| 123 | Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm |
| 124 | Oxidised mild steel single acting spring hinges 150 mm |
| 125 | Oxidised mild steel single acting spring hinges 125 mm |
| 126 | Oxidised mild steel sliding door bolt 300x16 mm |
| 127 | Oxidised mild steel sliding door bolt 250x16 mm |
| 128 | Oxidised mild steel door latch 300x20x6 mm |
| 129 | Oxidised mild steel door latch 250x20x6 mm |
| 130 | Oxidised mild steel tower bolt (barrel type) 250x10mm |
| 131 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
| 132 | Oxidised mild steel tower bolt (barrel type) 150x10 mm |
| 133 | Oxidised mild steel tower bolt (barrel type) 100x10 mm |
| 134 | Oxidised mild steel handles 125 mm |
| 135 | Oxidised mild steel handles 100 mm |
| 136 | Oxidised mild steel hasps and staples (safety type)150 mm |
| 137 | Oxidised mild steel hasps and staples (safety type ) 115 mm |
| 138 | Oxidised mild steel hasps and staples (safety type ) 90 mm |
| 139 | Oxidised mild steel screws 50 mm |
| 140 | Oxidised mild steel screws 40 mm |
| 141 | Oxidised mild steel screws 30 mm |
| 142 | Oxidised mild steel screws 25 mm |
| 143 | Oxidised mild steel screws 20 mm |
| 144 | Anodised Aluminium butt hinges 125x75x4 mm |
| 145 | Anodised Aluminium butt hinges 125x63x4xmm |
| 146 | Anodised Aluminium butt hinges 100x75x4 mm |
| 147 | Anodised Aluminium butt hinges 100x63x3.2 mm |
| 148 | Anodised Aluminium butt hinges 100x63x4 mm |
| 149 | Anodised Aluminium butt hinges 75x63x4 mm |
| 150 | Anodised Aluminium butt hinges 75x63x3.2 mm |
| 151 | Anodised Aluminium butt hinges 75x45x3.2 mm |
| 152 | Anodised Aluminium sliding door bolt 300x16 mm |
| 153 | Anodised Aluminium sliding door bolt 250x16 mm |
| 154 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 155 | Anodised Aluminium tower bolt (barrel type) 250 x 10 mm |
| 156 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 157 | Anodised Aluminium tower bolt (barrel type) 150x10 mm |
| 158 | Anodised Aluminium tower bolt (barrel type) 100x10 mm |
| 159 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 160 | Anodised Aluminium handles 100 mm with plate 150 x 32 mm |
| 161 | Anodised Aluminium handles 75 mm with plate 125 x 32 mm |
| 162 | Block board construction flush door with teak wood ply on both faces 35 mm thick |
| 163 | Block board construction flush door with teak wood ply on both faces 25 mm thick |
| 164 | Block board construction flush door with commercial ply on both faces 30 mm thick |
| 165 | Block board construction flush door with commerciial ply on both faces 25 mm thick |
| 166 | Square vision panel (upto 0.10sqm) in Block board construction flush door |
| 167 | Decorative plywood 4 mm |
| 168 | Fuel wood |
| 169 | Calcium silicate base compound for jointing calcium silicate tiles |
| 170 | Cement Concrete Jali 50 mm thick |
| 171 | Cement Concrete Jali 40 mm thick |
| 172 | Cement Concrete Jali 25 mm thick |
| 173 | Kerosene oil |
| 174 | Unslaked lime |
| 175 | Deharadun white lime |
| 176 | Satna lime |
| 177 | Dry hydrated lime (factory made) |
| 178 | Marble dust/ powder |
| 179 | Marble chips up to 4 mm and downsize white &black |
| 180 | Marble chips large size above 4 mm white & black |
| 181 | Silicon and acrylic emulsion |
| 182 | Acrylic distemper Ist quality, having VOC content less than 50 gm/litre |
| 183 | Acrylic emulsion, having VOC content less than 50 gm/litre |
| 184 | Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre |
| 185 | Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre |
| 186 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 187 | Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre |
| 188 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 189 | Exterior primer |
| 190 | Moorum |
| 191 | Dry distemper |
| 192 | Oil bound washable distemper/ Acrylic distemper |
| 193 | Linseed oil (double boiled) |
| 194 | Cement Primer |
| 195 | Distemper primer |
| 196 | Pink primer (for wood) |
| 197 | White cement based putty |
| 198 | Aluminium paint |
| 199 | Acid proof paint (chocolate or black) |
| 200 | Anticorrosive bituminous paint (black) |
| 201 | Black Japan |
| 202 | Enamel paint |
| 203 | Synthetic enamel paint in black or chocolate shade |
| 204 | Synthetic enamel paint in all shades except black or chocolate shade |
| 205 | Superior copal varnish |
| 206 | Green or blue medium shade pigment |
| 207 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 208 | Coarse sand (zone III) |
| 209 | Fine sand (zone IV) |
| 210 | Galvanised steel plain sheets |
| 211 | Standard quality hard board sheet 3 mm thick |
| 212 | Standard quality hard board sheet 4.5 mm thick |
| 213 | Shellac |
| 214 | Spirit |
| 215 | Selection No.1 grass turf with earth 50mm To 60mm thickness |
| 216 | Spun yarn |
| 217 | Mild steel round bar 12 mm dia and below |
| 218 | Mild Steel round bar above 12 mm dia |
| 219 | Average rate of mild steel round bars for reinforcements |
| 220 | Twisted steel/deformed bars |
| 221 | Mild steel square bars |
| 222 | Structural steel such as tees, angles, channels and R.S. joists |
| 223 | Flats up to 10 mm in thickness |
| 224 | Flats exceeding 10 mm in thickness |
| 225 | Mild steel plates |
| 226 | Mild steel rivets |
| 227 | Mild steel bolts 6 mm dia and 25 mm long with hexagonal head |
| 228 | Bolts and nuts above 300 mm in length |
| 229 | Stone for masonry work |
| 230 | Stone for pitching 15 cm x 22.5 cm |
| 231 | Stone dust |
| 232 | Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 233 | Kota stone slab 25 mm thick (rough chiseled) |
| 234 | Stone grit 6 mm and down size or pea sized gravel |
| 235 | Crushed stone 2.36 mm to 12.5 mm size |
| 236 | Surkhi |
| 237 | Klin seasoned selected sheesham wood planks |
| 238 | Precast terrazzo tiles 22 mm thick (light shade) |
| 239 | Precast terrazzo tiles 22 mm thick (medium shade) |
| 240 | Precast terrazzo tiles 22 mm thick (dark shade) |
| 241 | G.I Limpet washer |
| 242 | Bitumen washer |
| 243 | G.I. Plain washer thick |
| 244 | G.I. Plain washer thin |
| 245 | G.I. Plain washer for seam bolts |
| 246 | Water proofing materials |
| 247 | Welding by gas plant |
| 248 | Welding by electric plant |
| 249 | Wire nails |
| 250 | Wire mesh (rabbit) |
| 251 | 20 mm dia holding down bolts |
| 252 | Hard drawn steel wire |
| 253 | Mild steel flat strap fitting |
| 254 | Chequered terrazzo tiles 22 mm thick (light shade) |
| 255 | Chequered terrazzo tiles 22 mm thick (medium shade) |
| 256 | Chequered terrazzo tiles 22 mm thick (dark shade) |
| 257 | Diesel oil |
| 258 | Commercial LPG in cylinder |
| 259 | Tile fixing chemical adhesive |
| 260 | Cement Polymer Grout Compound |
| 261 | Acid for cleaning tiles |
| 262 | Silicon based Joint Sealeant for Tiles |
| 263 | Rubber base Adhesive |
| 264 | Bleaching powder |
| 265 | C.I. bracket for wash basin and sinks |
| 266 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate for European type W.C. |
| 267 | C.P. brass chain with 32 mm dia rubber plug |
| 268 | C.P.brass chain with 40 mm dia rubber plug |
| 269 | Clamps and M.S. stays including bolts and nuts for 100 mm pipe |
| 270 | Brass bib-cock-15 mm dia |
| 271 | Brass bib-cock 20 mm dia |
| 272 | Brass stop-cock 15 mm dia |
| 273 | Brass stop-cock 20 mm dia |
| 274 | C.I. Cover and frame 300X300 mm inside |
| 275 | C.I. Cover without frame 300x300 mm inside |
| 276 | Vitreous china foot rests 250x130x30 mm |
| 277 | C.I. Grating 100x100 mm |
| 278 | C.I. grating 150x150 mm |
| 279 | C.I. grating 180x180 mm |
| 280 | Mirror of superior make glass 60x45 cm |
| 281 | vitreous china pedestal for wash basin |
| 282 | G.I. pipes 15 mm dia |
| 283 | G.I. pipes 20 mm dia |
| 284 | G.I. pipes 25 mm dia |
| 285 | G.I. pipes 32 mm dia |
| 286 | G.I. pipes 40 mm dia |
| 287 | G.I pipes 50 mm dia |
| 288 | G.I. pipes 65 mm dia |
| 289 | G.I. pipes 80 mm dia |
| 290 | G.I. back (jam) nuts 25 mm dia |
| 291 | G.I.back (jam) nuts 65 mm dia |
| 292 | G.I.tees (equal) 25 mm |
| 293 | G.I. tees (equal) 65 mm |
| 294 | Slotted cowl (terminal guard) 75 mm dia |
| 295 | Slotted cowl (terminal guard) 100 mm dia |
| 296 | G.I. Union 15 mm nominal bore |
| 297 | G.I. Union 20 mm nominal bore |
| 298 | G.I. Union 25 mm nominal bore |
| 299 | G.I. Union 32 mm nominal bore |
| 300 | G.I. Union 40 mm nominal bore |
| 301 | G.I. Union 50 mm nominal bore |
| 302 | G.I. Union 65 mm nominal bore |
| 303 | G.I. Union 80 mm nominal bore |
| 304 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 305 | Sand cast iron S & S single unequal junctions: 100x100x75x75 mm dia |
| 306 | Sand cast iron S&S single unequal Junction: 100x100x75 mm dia with access dor |
| 307 | Sand cast iron S&S double unequal junction: 100x100x75x75xmm dia with access door |
| 308 | Sand cast iron heel rest bend 75 mm dia |
| 309 | Sand cast iron heel rest bend 100 mm dia |
| 310 | S.C.I hand pump |
| 311 | R.C.C. pipes NP2 class 300 mm dia |
| 312 | R.C.C. pipes NP2 class 450 mm dia |
| 313 | R.C.C. pipes NP2 class 600 mm dia |
| 314 | R.C.C. pipes NP2 class 900 mm dia |
| 315 | R.C.C. pipes NP2 class 1000 mm dia |
| 316 | R.C.C. pipes NP2 class 1200 mm dia |
| 317 | RCC pipe 450 mm dia NP -3 spigot |
| 318 | RCC pipe 600 mm dia NP- 3 spigot |
| 319 | RCC pipe 900 mm dia NP - 3 spigot |
| 320 | RCC pipe 1000 mm dia NP -3 spigot |
| 321 | RCC pipe 1200 mm dia NP - 3 spigot |
| 322 | RCC pipe 1800 mm dia NP- 3 spigot |
| 323 | RCC pipe 450 mm dia NP- 4 spigot |
| 324 | RCC pipe 600 mm dia NP- 4 spigot |
| 325 | RCC pipe 900 mm dia NP- 4 spigot |
| 326 | RCC pipe 1000 mm dia NP- 4 spigot |
| 327 | RCC pipe 1200 mm dia NP- 4 spigot |
| 328 | RCC pipe 1800 mm dia NP- 4 spigot |
| 329 | stoneware pipes grade A (60 cm long) 100 mm dia |
| 330 | Stoneware pipes grade A (60 cm long ) 150 mm dia |
| 331 | Stoneware pipes grade A (60 cm long ) 200 mm dia |
| 332 | Stoneware pipes grade A (60 cm long)230 mm dia |
| 333 | Stoneware pipes grade A (60 cm long) 250 mm dia |
| 334 | Fire clay kitchen sink: 600x450x250 mm |
| 335 | White vitreous china laboratory sink 450x300x150x mm |
| 336 | White vitreous china laboratory sink 600x450x200 mm |
| 337 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 338 | Shower rose C.P brass for 15 to 20 mm intel 100 mm dia |
| 339 | Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia |
| 340 | Spun yarn |
| 341 | Strainer brass 40 mm dia 1.5 metre long |
| 342 | Vitreous china lipped front urinal |
| 343 | Vitreous china squatting plate urinal |
| 344 | H.P. or L.P. ball valve with polythene floats: 15 mm dia |
| 345 | H.P. or L.P. ball valve with polythene floats: 20 mm dia |
| 346 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 347 | 20 mm dia Gunmetal gate valve with wheel |
| 348 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 349 | Brass full way valve with C.I. wheel (screwed end) 32 mm dia |
| 350 | Brass full way valve with C.I. wheel (screwed end) 40 mm dia |
| 351 | Brass full way valve with C.I. wheel (screwed end) 50 mm dia |
| 352 | Brass full way valve with C.I. wheel (screwed end) 65 mm dia |
| 353 | Brass full way valve with C.I. wheel (screwed end) 80 mm dia |
| 354 | Gunmetal non-return valve-horizontal (screwed end) 25 mm dia |
| 355 | Gunmetal non-return valve-horizontal (screwed end) 32 mm dia |
| 356 | Gunmetal non-return valve-horizontal (screwed end) 40 mm dia |
| 357 | Gunmetal non-return valve-horizontal (screwed end ) 50 mm dia |
| 358 | C.I.Sluice valve (with caps) class I : 100 mm dia |
| 359 | C.I.Sluice valve (with caps) class I : 125 mm dia |
| 360 | C.I.Sluice valve (with caps) class I : 150 mm dia |
| 361 | C.I.Sluice valve (with caps) class I : 200 mm dia |
| 362 | C.I.Sluice valve (with caps) class I : 250 mm dia |
| 363 | C.I.Sluice valve (with caps) class : 300 mm dia |
| 364 | Vitreous China flat back wash basin 630x450 mm |
| 365 | Vitreous China angle back wash basin 600x480 mm |
| 366 | Vitreous china angle back wash basin 400x400 mm |
| 367 | Vitreous china India type w.c. pan size 580 mm |
| 368 | Vitreous China orrisa type w.c. pan size 580 mm |
| 369 | Bolts and nuts 16 mm dia 60 mm long |
| 370 | Bolts and nuts 16 mm dia 65 mm long |
| 371 | Bolts and nuts 20 mm dia 65 mm long |
| 372 | Bolts and nuts 20 mm dia 70 mm long |
| 373 | Bolts and nuts 20 mm dia 75 mm long |
| 374 | Bolts and nuts 20 mm dia 80 mm long |
| 375 | Bolts and nuts 24 mm dia 85 mm long |
| 376 | Bolts and nuts 24 mm dia 90 mm long |
| 377 | White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacture's specifications |
| 378 | Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings, seat cover etc |
| 379 | Vitreous china foot rests 250x125x25 mm |
| 380 | Common burnt clay F.P.S. (non modular) bricks tile class designation 10 |
| 381 | Common burnt clay modular bricks class designation 12.5 |
| 382 | 4 mm thick ACP |
| 383 | Galvanised steel corrugated sheets |
| 384 | Vitreous china flat back wash basin 550x400 mm |
| 385 | Gunmetal non-return valve-verticlal (screwed end) 80 mm dia |
| 386 | Vitreous china toilet paper holder of standard size |
| 387 | 560 mm dia cover with frame (Heavy duty) |
| 388 | 560 mm dia cover without frame (Heavy duty) |
| 389 | Stainless steel bolts /square bar and plates |
| 390 | Mild steel tubes hot finished welded type |
| 391 | Mild steel tubes hot finished seamless type |
| 392 | Aluminium primer |
| 393 | Red oxide Zinc chromate primer |
| 394 | Mobil oil |
| 395 | Coloured inter locking C.C. paver block |
| 396 | White marble slab Makrana second quality plain veined 18 mm thick |
| 397 | Pink marble slab plain 18 mm thick |
| 398 | Udaypur green marble slab plain 18 mm thick |
| 399 | Black Zebra Marble slab plain 18 mm thick |
| 400 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 401 | Vitreous china flat back wash basin 450x300 mm |
| 402 | Vitreous china 10 litres low level cistern with fittings |
| 403 | F.P.S. (non modular) clay fly ash bricks class designation 7.5 |
| 404 | 12.5 mm thick tapered edge gypsum plain board |
| 405 | Primer (for gypsum board) |
| 406 | M.S. Butt hinges 125x90x4 mm |
| 407 | 12.5 mm thick Fully Perforated gypsum board |
| 408 | 12.5 mm thick tapered edge gypsum fire resistant board |
| 409 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 410 | GI wire netting 3/4 |
| 411 | 400 G polythene sheet |
| 412 | Hydraulic door closer tubular type Aluminium section body |
| 413 | Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg |
| 414 | Chequered precast cement concrete tiles 22 mm thck using marble chips of size 6 mm - light shade using white cement |
| 415 | White Vetrious Urinal |
| 416 | Stainless steel kitchen sink - with drain board bowl depth 250 mm |
| 417 | Stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth 225 mm. |
| 418 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm |
| 419 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm |
| 420 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 421 | Coloured Orissa pattern W.C. pan 580x440 mm |
| 422 | Coloured Pedestal type W.C. pan 580x440 mm (European type) |
| 423 | Coloured Vitreous china 10 lit. low level cistern |
| 424 | Coloured (other than black)solid P.V.C. seat in European W.C. pan |
| 425 | Circular shape 450 mm dia Mirror with Plastic moulded frame |
| 426 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
| 427 | Oval shape 450x350 mm (outer dimension) Mirror with Plastic moulded fame |
| 428 | Rectangular shape 1500x450 mm Mirror with Plastic moulded frame |
| 429 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 430 | White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings |
| 431 | Rectangular shape 600x 450 mm precast R.C.C. manhole cover with frame - L.D. - 25 |
| 432 | Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. -25 |
| 433 | Circular shape 450 mm dia precast R.C.C. manhole cover with frame L.D. -25 |
| 434 | uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia |
| 435 | uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia |
| 436 | uPVC single equal Tee (without door) 75x75x75 mm |
| 437 | uPVC single equal Tee (without door) 110x110x110 mm |
| 438 | uPVC single equal Tee (with door) 75x75x75 mm |
| 439 | uPVC single equal Tee (with door) 110x110x110 mmmm |
| 440 | uPVC bend 87.50, 75 mm bend |
| 441 | UPVCbend 87.50, 110 mm bend |
| 442 | UPVC pipe clip 75 mm bend |
| 443 | UPVC pipe clip 110 mm bend |
| 444 | Precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement |
| 445 | Epoxy paint |
| 446 | Superior quality road marking paint (water based) |
| 447 | C.P.Brass bibcock 15 mm |
| 448 | C.P. Brass long nose bibcock 15 mm |
| 449 | C.P. Brass long body bibcock 15 mm |
| 450 | C.P. Brass stop cock (concealed) 15 mm |
| 451 | Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
| 452 | Granite of any colour, 18 mm thick (slab area above 0.50 sqm) |
| 453 | Binding wire |
| 454 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 455 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556 |
| 456 | Precast R.C.C. grating with frame 500x450 mm horizontal grating |
| 457 | Precast R.C.C. grating with frame 450x100 mm vertical grating |
| 458 | Double action hydraulic floor spring with stainless steel cover plate |
| 459 | Double action hydraulic floor spring with brass cover plate |
| 460 | 15 mm PTMT bib cock |
| 461 | 15 mm PTMT bib cock with flange (fancy) |
| 462 | 15 mm PTMT bib cock long body with flange |
| 463 | 15 mm PTMT bib stop cock (male thread) |
| 464 | 20 mm dia. PTMT bib stop cock |
| 465 | PTMT pillar cock |
| 466 | PTMT push cock 15 mm dia |
| 467 | Cat's eye |
| 468 | Glass sheet (pin headed ) 4 mm thick |
| 469 | Raj nagar plain white marble (table rubbed add polished ) 18 mm thick (slab area upto 0.50 sqm) |
| 470 | Raj nagar plain white marble (table rubbed and polished ) 18 mm thick (slab area more than 0.50 sqm) |
| 471 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick |
| 472 | Prelaminated particle board with both side decorative lamination, flat pressed 3 layer & grade ( medium density ) Grade I, Type II conforming to IS: 12823 (exterior grade) 12 mm thick |
| 473 | Oxidised M.S. hinges finished with nickel plating 50 mm (Pver all width) |
| 474 | Oxidised M.S. hinges finished with nickel plating 65 mm (Over all width) |
| 475 | PTMT - Waste Coupling 31/32 mm |
| 476 | PTMT - Waste Coupling 38/40 mm |
| 477 | PTMT - Bottle Trap 31/32 mm |
| 478 | PTMT - Bottle Trap 38/40 mm |
| 479 | PTMT - Ball Cock 15 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 480 | PTMT - Ball Cock 25 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 481 | PTMT - Swiveling shower 15 mm |
| 482 | PTMT - Liquid Soap Container of 400 ml capacity |
| 483 | PTMT - Towel Ring 215x200x37 mm |
| 484 | PTMT - Towel Rail (450 mm) |
| 485 | PTMT - Towel Rail (600 mm) |
| 486 | PTMT - Shelf 450x124x36 mm |
| 487 | PTMT - Urinal Spreader 15 mm |
| 488 | PTMT - Soap Dish/Holder 138x102x75 mm |
| 489 | PTMT - handle 125x34x24 mm |
| 490 | PTMT - handle150x34x24 mm |
| 491 | Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894 |
| 492 | Boulder 50 mm to 200 mm |
| 493 | Gravel 5 mm to 10 mm |
| 494 | Gravel 1.5 mm to 2 mm |
| 495 | Gravel 3 mm to 6 mm |
| 496 | M.S. pipe 100 mm dia casing pipe |
| 497 | M.S. cap 100 mm dia |
| 498 | Stone cleaning chemical approved by ASI |
| 499 | Turpentine oil |
| 500 | Pea Gravel |
| 501 | Coloured inter locking C.C. paver Block |
| 502 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 503 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 504 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 505 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 506 | Matt finished vitrified tile 100x100 x16 mm |
| 507 | Vitrified tile |
| 508 | Hire charges of Drill machine upto 30 mm dia |
| 509 | Epoxy |
| 510 | Hire charges of compressure |
| 511 | Adhesive chemical |
| 512 | Bit of drilling machine for Hole upto 30 mm dia |
| 513 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 514 | 30 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 515 | Adhesive solvent cement |
| 516 | Geotextile 120 gram per sqm membrane |
| 517 | Acrylic exterior paint |
| 518 | Vitrified floor tile 50x50 cm |
| 519 | Vitrified floor tile 60x60 cm |
| 520 | Vitrifies floor tile 80x80 cm |
| 521 | Vitrified floor tile 100x100 cm |
| 522 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia |
| 523 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia |
| 524 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia |
| 525 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia |
| 526 | Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia |
| 527 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia |
| 528 | Eposy Grout |
| 529 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 530 | Telescopic drawer channels 300 mm long |
| 531 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 532 | Magnetic catcher triple strip vertical type |
| 533 | Magnetic catcher double strip horizontal type |
| 534 | 100 mm mortice lock with 6 levers for aluminium door |
| 535 | 12.5 mm thick Glass fibre reinforced Gypsum board |
| 536 | 30 mm thick factory made glass fiber reinforced pllastic flush door shutte i/c carriage |
| 537 | P.V.C. Single piece extruded door frame of profile size 50 mm x 47 mm with wall thickness of 5 mm |
| 538 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 539 | 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in white grey or wooden finish |
| 540 | 37 mm thick Factory made shutter with style, rails and panels of PVC extruded section in white or grey finish i/c carriage |
| 541 | 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in white, grey or wooden finish |
| 542 | Toughened glass 12 mm thickness |
| 543 | Reducing Tee for 22.22 mm X 15.88 mm outer dia SS pipe |
| 544 | Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe |
| 545 | Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe |
| 546 | Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe |
| 547 | Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe |
| 548 | Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe |
| 549 | Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe |
| 550 | Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe |
| 551 | Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe |
| 552 | Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe |
| 553 | Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 554 | Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 555 | Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 556 | Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 557 | Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded |
| 558 | Female thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 559 | Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 560 | Female Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 561 | Female Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 562 | Female Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 563 | Female Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded |
| 564 | Female Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 565 | Male Threaded Elbow 90o for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 566 | Male Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 567 | Male Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 568 | Male Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 569 | Male Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded |
| 570 | Male Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 571 | Cap for 15.88 mm outer dia pipe |
| 572 | Cap for 22.22 mm outer dia pipe |
| 573 | Cap for 28.58 mm outer dia pipe |
| 574 | Cap for 34.00 mm outer dia pipe |
| 575 | Cap for 42.70 mm outer dia pipe |
| 576 | Cap for 48.60 mm outer dia pipe |
| 577 | G I wire |
| 578 | Bricks |
| 579 | Stone aggregate below 40 mm nominal size |
| 580 | Coarse sand |
| 581 | Steel |
| 582 | Stone aggregate 40 mm nominal size and above |
| 583 | Cement |
| 584 | Tar bitumen |
| 585 | Good earth |
| 586 | G.I. pipes below 100 mm dia |
| 587 | R.C.C. Pipes 600,700,750 & 800 mm dia |
| 588 | R.C.C. pipes 900 mm dia |
| 589 | R.C.C. pipes 1000 mm dia |
| 590 | R.C.C. pipes 1100 mm dia |
| 591 | R.C.C. pipes 1200 mm dia |
| 592 | R.C.C. pipe above 1200 mm dia and upto 1800 mm dia |
| 593 | Cast iron pipes 600 mm dia |
| 594 | Cast iron pipes 700 mm dia |
| 595 | Cast iron pipes 800 mm dia |
| 596 | Cast iron pipes 900 mm dia |
| 597 | Cast iron pipes 1000 mm dia |
| 598 | 1st class picked Jhama Bricks(Traditional) |
| 599 | Stone boulder( 225 mm above ) |
| 600 | Stone boulder ( 225mm-150mm ) |
| 601 | Laterite Boulder |
| 602 | Fine Sand |
| 603 | Medium Sand |
| 604 | Coarse Sand |
| 605 | Bamboo (8cm-10cm dia) including fixing |
| 606 | Eucalyptus Bullah (7.5cm -10cm dia) |
| 607 | Eucalyptus Bullah (12.5cm -15cm dia) |
| 608 | Eucalyptus Bullah (17.5cm -20cm dia) |
| 609 | Sal Bullah (7.5cm -10cm dia) |
| 610 | Sal Bullah (12.5cm -15cm dia) |
| 611 | Sal Bullah (17.5cm -20cm dia) |
| 612 | Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings |
| 613 | Hire charges of Shuttering plank (25mm-30mm thick) without Prop including all fittings |
| 614 | Hire charges of Shuttering plank (above 30mm-37mm thick) with Prop including all fittings |
| 615 | Loading unloading & stacking Sand/ stone aggregate (less than 40mm nominal size) |
| 616 | Loading unloading & stacking stone aggregate (above 40mm nominal size) |
| 617 | Loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material |
| 618 | Stone Screening Type A (13.2 mm) |
| 619 | Stone Screening Type B (11.2mm) |
| 620 | 1st Class traditional Bricks (kiln burnt) |
| 621 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 600, 700, 750 & 800 mm dia |
| 622 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 900 mm dia |
| 623 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1000, 1100 & 1200 mm dia |
| 624 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1400 & 1800 mm dia |
| 625 | River bed material |
| 626 | Sausage Wire Net |
| 627 | Wood dust |
| 628 | Tor Steel Rods/HYSD bars/TMT bars (SAIL/TATA/RINL) (Fe415/Fe500/Fe500Dconforms to IS: 1786) |
| 629 | Tor Steel Rods/HYSD bars/TMT bars(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 630 | Tor Steel Rods/HYSD bars/TMT bars (Other than Sail/TATA/RINL/JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500Dconforms to IS: 1786) |
| 631 | Loading, unloading and stacking by Manual Means of Steel |
| 632 | Sal Silliguri |
| 633 | Sal Malaysia |
| 634 | Neem wood |
| 635 | Other Local Wood |
| 636 | Ordinary Teak wood |
| 637 | Sisu/Gamar wood |
| 638 | Local Sal Wood |
| 639 | Coal Tarring |
| 640 | Fan Hook |
| 641 | R.C.C ventilator of 20 mm. thick Upto 0.10 sq.m. area |
| 642 | R.C.C ventilator of 20 mm. thick above 0.10 sq.m. area |
| 643 | Udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 644 | Chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 645 | Udaypur marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 646 | Chawk dungri marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 647 | FRP composite door frame 66mm x 70mm |
| 648 | FRP composite door frame 66mm x 90mm |
| 649 | Coloured Pedestal type W.C. pan 580x440 mm (European type) S Trap |
| 650 | 32 MM dia polythene flush pipe |
| 651 | 18 mm thick marble partition slab for urinals including fitting fixing (with Chawk Doongri marble) |
| 652 | GI pipe 32 mm dia medium quality for UNDERGROUND WORKS |
| 653 | GI pipe 40 mm dia medium quality for UNDERGROUND WORKS |
| 654 | CPVC (Chlorinated Polyvinyl Chloride) pipes (15 mm dia) [For Concealed Work] |
| 655 | CPVC (Chlorinated Polyvinyl Chloride) pipes (20 mm dia) [For Concealed Work] |
| 656 | CPVC (Chlorinated Polyvinyl Chloride) pipes (25 mm dia) [For Concealed Work] |
| 657 | Thermocol 12.5 mm thick. |
| 658 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 659 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 660 | Polythene Bib Cock / Stop Cock (HD) with metal/plastic inlet (EMCO / ATLAS or equivalent) |
| 661 | Sink 630 mm X 550 mm X 180 mm with waste fittings and two coats of painting of C.I. brackets |
| 662 | Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand. |
| 663 | 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHINGSPECIAL of ESSCO or similar brand). |
| 664 | Structural members of specified sections weighing less than -22.5 Kg./m (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)-1964) |
| 665 | Structural Works in Roof Trusses etc. using joists, channels and angles of specified section (conforming to IS: 226, IS: 808 & SP (6)- 1964) weighing less than 22.5 kg/ m |
| 666 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161-1998 (trusses spanning up to 12.00 m) |
| 667 | M.S. structural with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) Span up to 12 Mtr |
| 668 | P.V.C. CONNECTOR 15 mm dia 600 mm long |
| 669 | Polythene waste fittings complete 32mm |
| 670 | Waste pipe, with PVC coupling at one end fitted with necessary clamps 900 mm long |
| 671 | Fly Ash Bricks(Traditional) |
| 672 | Iron hasp bolt 250mm long |
| 673 | Iron door ring 50mm dia |
| 674 | Iron Catch Hook 6mm dia 225mm long |
| 675 | M.S Clamps 40mm X 6mm, 125mm Length |
| 676 | Anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia. bolt. |
| 677 | Anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia. bolt. |
| 678 | Anodised aliminium D-type handle continuous plate base (Hexagonal/ Round rod) 150 mm grip x 10 mm dia rod |
| 679 | Towel rail (CP over brass )- 600 mm |
| 680 | Collapsible gate |
| 681 | Steel railing |
| 682 | MS Integrated grill for steel window and ventillator |
| 683 | 1.5 mm thick ms sheet |
| 684 | CI manhole cover 450 mm dia |
| 685 | C.P. over brass Waste fittings 32 mm |
| 686 | Malayasia sal cleat |
| 687 | Two point nose steel handle |
| 688 | Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. |
| 689 | two point nose window handle |
| 690 | top hung side hung ventillator |
| 691 | Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm |
| 692 | C.P. over brass Waste fittings 32 mm |
| 693 | Empty Gunny Bag |
| 694 | waste pipe, with PVC coupling at one end fitted with necessary clamps900 mm long |
| 695 | waste pipe, with PVC coupling at one end fitted with necessary clamps 750 mm long |
| 696 | False ceiling (with 4mm thick Pearl Designer Fibre Cement Board) |
| 697 | False ceiling (with 6 mm thick Fiber Cement Designer Board) |
| 698 | Supplying, fitting & fixing Asbestos corrugated sheet(6 mm thick) |
| 699 | Supplying, fitting & fixing Asbestos ridging |
| 700 | Supplying, fitting & fixing Zn-Al alloy steel sheet work In Roof |
| 701 | Supplying, fitting & fixing Aluminium sheet ridging |
| 702 | fitting and fixing glass reinforced polyester translucent fiber glass sheet |
| 703 | fitting and fixing glass reinforced polyester translucent ridging |
| 704 | fitting & fixing circular corrugated Aluminium sheet |
| 705 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window |
| 706 | Supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf Aluminium swing door |
| 707 | Supplying, fitting & fixing of Aluminium fixed partition wall of all aluminium sections |
| 708 | UPVC Plain Y 75 mm dia |
| 709 | UPVC Plain Y 110 mm dia |
| 710 | Supplying solid flush type doors of commercial quality |
| 711 | Bitumen VG-30 |
| 712 | Modular fly ash bricks |
| 713 | Bitumen Emulsion |
| 714 | Precast cement concrete blocks (Nominal Mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar) |
| 715 | Grade 1 stone metal 63 mm to 45 mm |
| 716 | Fencing Post 215 cm 150 mm X 150 mm section at bottom, 100 mm X 100 mm section at top with T-Base 300 mm X 150 mm X 100 mm, having 4 nos 6 mm dia vertical M.S. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth |
| 717 | Fixing post of iron or precast concrete incl. digging hole, packing the hole with cement concrete (1:3:6) with jhama khoa and necessary plaster with 15 cm th cement plaster (1:6) complete |
| 718 | Polythene sheet (150 gm per sqm) |
| 719 | Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 720 | Galvanised Barbed wire 3 ply 12 gauge / 4 points including fittings and fixing to the post complete in all respect. |
| 721 | Fixing Barbed wire to the post including fiting fixing. |
| 722 | Corner Urinal |
| 723 | CI P trap |
| 724 | CI S Trap |
| 725 | Check valve 32mm |
| 726 | Check valve 40mm |
| 727 | Check valve 50mm |
| 728 | Reducing socket 20mm x 15mm |
| 729 | Reducing socket 25mm x 20mm |
| 730 | Reducing socket 25mm x 15mm |
| 731 | Reducing Elbow 20 mm x 15 mm |
| 732 | Reducing Elbow 25 mm x 20 mm |
| 733 | Open Weave Jute Geo-textile (JGT) having overall weight of 500 gm per Sq. M thickness 5 mm, width 1220 mm, Tensile strength 10 KN/m x 7.50 KN/m including lapping, staples or nails, testing |
| 734 | Woven Jute Geo-textile (JGT) 724 gm/sqm possessing tensile strength of 25 KN/m including lapping, staples or nails, testing |
| 735 | Nylon Net |
| 736 | Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts by means of galvanised \\"C\\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G. 5 mm. x 75 mm. x 8 g. |
| 737 | Silver sand |
| 738 | Loading unloading and stacking by Manual Means Tar, Bitumen etc |
| 739 | Medium Sand |
| 740 | Boulder 30/45 KG, Pakur Variety |
| 741 | Shuttering without crop |
| 742 | Ornamental grill above 16 kg |
| 743 | teak wood |
| 744 | Water Tanker 500 lt capacity |
| 745 | Orissa pattern water closet 530x410 mm |
| 746 | Lock & key |
| 747 | Buckets |
| 748 | Higher charge of Water carriers for RSP only(per day of 1000 lt) |
| 749 | Carrage Charge of water for RSP only (per time) |
| 750 | Locking Spring (Zig Zag) |
| 751 | Lateral Pipe 16 mm |
| 752 | Control Valve 40 mm |
| 753 | Flash Valve |
| 754 | Screen Filter |
| 755 | Shower |
| 756 | Bamboo |
| 757 | Rent of JCB Machine for Miywaki only |
| 758 | Good quality fine sand supply Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender