Tender For Electrification Work At Primary School Bandhian Behrote (Under Samagra Shiksha)
Tender Value
1.69 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
3 days left
EMD
3380
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrification Work At Primary School Bandhian Behrote (Under Samagra Shiksha)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 2 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit asrequired. |
| 4 | 2 X 2.5 SQ.MM + 1 X 2.5 SQ.MM EARTH WIRE |
| 5 | 4 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 6 | Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required |
| 7 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 8 | Supplying and Fixing suitable size G.I box with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 5/6 amps modular socket outlet and 5/6 amps modular switch,connection,painting etc. as required. |
| 9 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 10 | Supplying & fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board,415V, on surface/recess, complete with tinned copper bus bar,neutral bus bar,earth bar, din bar, interconnections,powder painted including earthing etc.as required (But without MCB/RCCB/Isolator) 6 way (4+18), Double door |
| 11 | Supplying and fixing 5 amps. to 32 amps.rating 240 volts 'C' series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
| 12 | single pole and neutral |
| 13 | Supplying and fixing following rating , four pole, 415 V, 10 ka M.C.B in the existing MCB DB Complete with interconnections,testing and commissioning as required.32 A F.P MCB 10 Ka \\"C\\" curve |
| 14 | Supply and Fixing Single Pole Blanking Plate in the Existing MCB DB complete as Required. |
| 15 | Supplying installation testing and commissioning of ceiling fan 3 star rated with voltage Range 90V to 300 V, Min. Air Delivery 212 CMM, Service value 5.3 Cu.m/min/watt, Aluminium blades,including wiring the down rods of standard length ( Upto 45cm) with 1.5sq.mm FR PVC insulated copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as required 1200 MM |
| 16 | Supplying,installation,Testing and commissioning of LED Surface mounted Batten light of following body material and construction as per IS:10322 with driver(Replaceable) as per the requirement with driver efficiency >85% operating voltage AC 140-270 volt, freq 50/60 hz,operating temp range-15 deg to 40 deg centigrade, internal surge protection of 2.5 KB with short & open circuit protection , THD>10%, P.F>0.95,IP20,CRI>80, Flicker free,( flicker should be below5%) lifetime(LED driver & electrical circuitary). of minimum 5000 burning hours with , 70% of initial lumen maintained till life ends ,CCT 3000k/4000k/5700k/6000k/6500k:40 watt |
| 17 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 18 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nutbolt & spring washer spaced at 50mm) |
| 19 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 20 | supplying and installation of PVC Copper cable of 16sqmm copper cable for service line Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender